Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

B1043 Install Backup Generator

Active
FA9401-26-R-0020Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The project involves installing a backup generator to support 377th Air Base Wing communication systems in Building 1043 at Kirtland Air Force Base, New Mexico. The contractor is responsible for providing all necessary services, materials, equipment, permits, studies, specifications, drawings, and supervision required to complete the design, procurement, and installation in full compliance with State of New Mexico, federal, and Kirtland AFB building codes. All work must adhere strictly to the Statement of Work and associated attachments, ensuring reliable power redundancy for critical communication infrastructure. The solicitation, identified as FA9401-26-R-0020, was posted on July 13, 2026, with responses due by August 12, 2026. It is a Total Small Business Set-Aside under NAICS code 238210 for electrical construction services. The contracting office is the Department of Defense’s 377th Mission Support Group located at Kirtland AFB, with the place of performance at Road Forks, New Mexico. Primary point of contact is Jeffrey Tuscany, reachable by phone or email, with Abigail R. Crespin as secondary contact. Further details are available through the official SAM.gov portal link provided.

General Info

Install backup generator for 377th ABW comms at Kirtland AFB under Small Business Set-Aside.

Agency

Department Of Defense → FA9401 377 Msg PkView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

ROAD FORKS, NM, 87117, USA

Set-Aside

SBA

Documents

(6)

Evaluation+Criteria+080079+Install+Backup+Generator.pdf

PDF

01a.+Attachment+A-Bldg1043_Floor+Plan.pdf

PDF

01c.+Attachment+C-EAL+Template+%28Wing+template%29.docx

DOCX

01b.+Attachment+B-Kirtland+AFB+Low+and+Medium-Voltage+Electrical+Design+and+Equipment+Req.pdf

PDF

Solicitation+-+FA940126R0020.pdf

PDF

01.+MMHMV080079+DB_SOW+Generator+B1043+02JUN2026.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9401 377 Msg Pk
Contacts2 people available
OfficeKIRTLAND AFB, NM, 87117-0001, USA
Organization / Agency
Department Of Defense → FA9401 377 Msg Pk
View Agency Profile
Office AddressKIRTLAND AFB, NM, 87117-0001, USA

Full Description

Show more

This project will be located on Kirtland Air Force Base (AFB), New Mexico. The primary goal of this project is to provide the installation of generator backup power to 377 ABW communication systems in B1043. The contractor shall furnish all services, materials, supplies, equipment, permits, investigation, studies,specifications, drawings and supervision as required in connection with the Statement of Work (SoW) for the design, ordering and installation of a successful completed project. All work shall be in strict compliance with all applicable codes as adopted and modified by the State of New Mexico, Federal and Kirtland AFB building codes.


Please review the Statement of Work(SoW) and other attachments for more information

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
SLED
Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the design, permitting, and construction of a comprehensive camera system to enhance security and operational oversight in the Bagwell and North Cargo Operations areas of the Port of Seattle. The project will install 50 high-resolution cameras across 43 locations, significantly expanding and upgrading surveillance coverage beyond the current setup, which primarily focuses on conveyor systems and security doors. Enhanced visibility will be achieved along main terminal drive lanes and entrances in the Bagwell area, enabling more effective forensic investigations and improved enforcement of the Port’s movement rules and regulations. In the North Cargo Operations area, the system will introduce flexible, pan-tilt-zoom camera units capable of delivering user-controlled surveillance over broader surface areas, bridging gaps in existing coverage. The deployment is intended to provide adaptive, real-time monitoring capabilities tailored to dynamic cargo operations. The work is being managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and project manager Randa Williams. The solicitation, posted in July 2026, falls under NAICS code 238210 for electrical contractors and related work, and is positioned as a forecast for future procurement without a specified set-aside classification.
Aviation Project Management Group

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Electrical Unit Price Portwide 2026The contract pertains to comprehensive electrical work for the Port of Seattle under the Electrical Unit Price Portwide 2026 solicitation, covering all phases of installation including raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding, all in strict compliance with applicable code requirements. The Contractor is responsible for supplying all labor, tools, equipment, materials, and incidental items necessary to execute tasks as directed by the Port through formal Work Authorizations, with labor provided strictly in accordance with the defined classifications outlined in the Schedule of Unit Prices. Performance of the work is governed by the Port of Seattle’s Port Construction Services division, with primary oversight provided by Heather Bowden and project management handled by Lesley Miles. The solicitation is classified under NAICS code 238210 for electrical contracting and is forecasted for potential award in 2026, though no formal solicitation number has been assigned. All work is to be performed in alignment with Port directives and regulatory standards, with communication and coordination facilitated through designated Port contacts. Contractors must ensure full adherence to all technical, safety, and labor classification requirements as stipulated in the agreement.
Port Construction Services

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
Federal
Electrical Equipment Supply and InstallationThe contract pertains to the supply and potential installation of electrical equipment that must be NRTL-listed or field-evaluated and fully compliant with established safety standards for deployment at Department of Energy facilities in Oak Ridge, Tennessee. The equipment is intended for use in DOE-operated sites and must meet rigorous regulatory requirements to ensure operational safety and reliability. Subcontractors are expected to provide products that align with the NAICS code 238210, indicating a focus on electrical contracting services, and must be prepared to deliver and, if required, install the equipment at the designated performance location. Responses are due by July 24, 2026, with the solicitation posted on July 20, 2026, allowing a four-day window for submission. The contract is classified as a subcontract under the auspices of ORNL UT-Battelle LLC, a primary DOE contractor, and the work is exclusively tied to federal energy infrastructure. All offered equipment must carry valid safety certifications, and the contracting entity emphasizes strict adherence to compliance protocols without exception. The place of performance is clearly identified as Oak Ridge, with no alternative locations permitted, and all vendors must ensure their proposals reflect both product eligibility and capability to meet the tight turnaround timeline.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
Federal
NIST Boulder Sitewide Exterior Lighting Inspection and RepairThe contractor is responsible for comprehensive monthly audits, inspections, maintenance, repair, replacement, and installation of all exterior lighting systems at the NIST Boulder Campus and, as authorized, the Ft. Collins Radio Station. This includes 100% inspection of all identified fixtures—such as pole-mounted luminaires, solar-powered lighting, walkway lights, and bollards—during nighttime hours, with full documentation of deficiencies and submission of detailed reports containing recommended corrective actions and cost estimates. Any repair or replacement work requires prior written authorization from the Contracting Officer and must use approved-equivalent lighting products that meet specified performance standards. The contractor must supply all labor, materials, tools, equipment, transportation, and access gear, while strictly adhering to environmental and hazardous waste regulations and coordinating all activities through the Contracting Officer’s Representative to ensure minimal disruption to sensitive research operations. Payment is restricted to authorized work carried out within the contract’s defined scope and funding limits. The solicitation titled NIST Boulder Sitewide Exterior Lighting Inspection and Repair, identified by number 1333ND26QNB190295, is a total small business set-aside under NAICS code 238210, administered by the Department of Commerce’s NIST office in Gaithersburg, Maryland, with performance located in Boulder, Colorado. A mandatory site visit is scheduled for July 7, 2026, at 1:30 p.m. at Building 1 Entrance, following a pre-solicitation site visit list dated July 2, 2026. Questions from prospective bidders are due by July 9, 2026, and all proposals must be submitted no later than July 24, 2026. Primary point of contact is Lauren Lopez, with secondary contact Shawn Borisow, both reachable via NIST email addresses. The opportunity was posted on SAM.gov on July 20, 2026, with a final response deadline of July 24, 2026, at 11:00 p.m.
Department Of Commerce Nist

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
Federal
Replace greenhouse lightingThe USDA-APHIS Forest Methods Pest Laboratory in Buzzards Bay, Massachusetts, is seeking to replace existing halogen lighting in its 15’ x 26’ air-conditioned greenhouse with a custom full-coverage LED lighting system featuring dimmable controls and manual, non-motorized pulley-based height adjustment. The installation requires a rigid frame and rail system suspended approximately 10.4 feet above the floor from which the LED fixtures will hang, allowing precise positioning over each growing table, including accommodations for overlapping heaters. The project is structured as a combined synopsis and solicitation for commercial items under a Total Small Business Set-Aside, limited to qualified small businesses under NAICS code 238210. Proposals must be submitted via email to the point of contact, Jim Roloff, by August 11, 2026, at 1 p.m. ET, with the solicitation number included in the subject line. A site visit is scheduled for July 28, 2026, and all questions must be submitted by August 4, 2026. The acquisition follows a lowest price, technically acceptable (LPTA) evaluation methodology, meaning only the lowest-priced offer that meets all technical and performance requirements will be considered for award. Offerors must demonstrate technical acceptability through a comprehensive proposal that includes relevant experience and verified past performance with references containing contract numbers, project details, completion dates, and contact information. Technical failure to meet requirements such as manual pulley adjustability, full-coverage illumination, or correct rail height will result in disqualification. The contract incorporates multiple FAR clauses related to construction, including inspection, changes, material and workmanship, accident prevention, labor standards under the Davis-Bacon Act, and prompt payment obligations, with progress payments eligible monthly upon certification and approval by the Contracting Officer. Performance and payment bonds are required, along with compliance with Buy American provisions, anti-trafficking certifications, and cybersecurity safeguarding standards. The contractor must also affirm compliance with federal anti-discrimination laws and Equal Protection principles, certify adherence to labor and wage regulations, and submit all payments and records for government audit. The estimated project value is under $25,000, and the USDA is exempt from sales tax.
Mrpbs Minneapolis Mn

POSTED

about 10 hours ago

DEADLINE

in 22 days
View Details
NAICS: 238210
New
Federal
J061--VAMC Central Western MA Bldg. 65 Electrical Switch RepairThe Department of Veterans Affairs is seeking commercial services for the repair of a medium voltage electrical switch at the Central Western Massachusetts Medical Center in Leeds, MA, under a combined synopsis and solicitation issued in accordance with FAR 12.603 and supplemented by the Federal Acquisition Circular 2026-01 and VAAR. The requirement, identified by NAICS code 238210 and PSC J061, is an unrestricted acquisition open to all responsible SAM-registered offerors, with no small business set-aside or socioeconomic preferences. The work involves replacing internal porcelain insulators and stainless-steel hardware in Switch 1, a PM255-2-2-2-LF park switch, installing a new S&C fuse holder assembly, cleaning and lubricating switch mechanisms, and performing field tests for insulation and contact resistance in full compliance with NFPA 70B and NFPA 70E standards, along with VA Directive 1028. The contractor must have a minimum of five years of documented experience specifically in repairing, testing, and performing lockout/tagout procedures on medium voltage equipment, excluding new installation work. All shutdowns, deenergizing, and safety measures are the contractor’s responsibility, and work must be coordinated with the Contracting Officer’s Representative through 21-day advance submission of plans and seven-day notice prior to on-site activities. The period of performance is strictly 90 calendar days from award, and all work must be performed on-site at 421 North Main St, Leeds, MA 01053. Offerors must submit four components: a Technical Proposal including OEM training certifications, project management approach, emergency response plan, safety and infection control protocols, and OEM-only parts sourcing; a Past Performance section with three recent, similar contracts; a complete Price Proposal for the single CLIN with all baseline and option pricing; and confirmation of active SAM registration and completion of required FAR 52.212-3 representations. Evaluation will prioritize Technical and Past Performance combined, with Price being secondary; award will be made to the most advantageous offer without discussions. The contract incorporates numerous FAR and VAAR clauses covering labor standards, equal opportunity, trafficking in persons, whistleblower rights, subcontracting limitations, ethical conduct, payment by electronic funds transfer, and prohibition of racially discriminatory DEI activities, with subcontractors required to comply with the same terms. The VA uses VISTA for payment processing, and failure to register in VISTA may
241-NETWORK Contract Office 01 (36C241)

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → FA9401 377 Msg Pk

Same awarding agency

NAICS: 541611
New
Federal
Air Force Occupational Safety/Health Support and Traffic Safety (AFOSH)The U.S. Air Force is soliciting competitive proposals under the 8(a) program for occupational safety, health, and traffic safety support services through solicitation FA940126Q0022, which was posted on July 20, 2026, with a response deadline of August 7, 2026, at 8:00 p.m. MDT. The contract, classified as a combined action under NAICS code 541611, requires the contractor to provide comprehensive AFOSH services to support mission readiness and workforce well-being across Air Force installations, with performance primarily centered at Kirtland Air Force Base in New Mexico. The solicitation is specifically designated as an 8(a) competed set-aside, open only to certified small disadvantaged businesses participating in the Small Business Administration’s 8(a) Business Development program. The contracting activity is led by the Department of Defense under office FA9401 377 Msg Pk, with Cassandra Bengfort serving as the primary point of contact for all inquiries, reachable via phone or email. All questions regarding the solicitation must be submitted by July 28, 2026, at 5:00 p.m. MDT and will be addressed collectively to ensure fairness and transparency. The contract includes performance at a single location with no additional place-of-performance cities or states specified, and all proposers must ensure compliance with federal procurement guidelines and 8(a) program eligibility requirements. Proposals should demonstrate expertise in safety programming, hazard mitigation, traffic management, and regulatory alignment with Air Force and OSHA standards.
Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 18 days
View Details
NAICS: 238220
New
Federal
Replace HVAC West Fitness CenterThis contract entails the complete design and installation of a new heating, ventilation, and air conditioning system at the West Side Fitness Center, Building B585, located at Kirtland Air Force Base, New Mexico. The scope requires the contractor to deliver a full HVAC replacement, including all necessary design analysis, detailed drawings, engineering specifications, and construction execution in strict compliance with Unified Facility Guide Specifications, the current International Building Code, and applicable Department of Defense, NFPA, NEC, IMC, IPC, and local codes. The work is structured as a firm fixed-price contract with a single line item covering all services and materials, under a prescribed budget range of $1,000,000 to $1,400,000. The project must be completed within 500 calendar days from the date of the Notice to Proceed, with distinct written approvals required for the start of both the design and construction phases. Deliverables must include geospatial data collected to sub-foot and sub-meter precision, complete record drawings, utility plans, and final site cleanup meeting strict cleanliness standards prior to acceptance. The solicitation is a 100% small business set-aside under NAICS code 238220 and requires proposers to meet rigorous technical and past performance pass/fail gates, with non-price factors significantly outweighing cost in evaluation. Proposals must include a bid guarantee, demonstrate at least three relevant construction and design projects, and adhere to a ten-page limit for past performance documentation. Contractors must be registered in SAM and WAWF, submit electronic invoicing through WAWF using specified documents, and comply with cybersecurity requirements including CMMC Level 1 self-assessment for handling Federal Contract Information. Additional mandatory provisions include 100% performance and payment bonds, adherence to prevailing wage standards, full compliance with DoD cybersecurity and supply chain rules including prohibitions on telecommunications from designated foreign entities, and ongoing reporting of key personnel changes. The place of performance and inspection point is at Kirtland AFB, with all submissions directed electronically to the designated contracting officer by the August 5, 2026 deadline, and offers must remain valid until September 30, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

3 days ago

DEADLINE

in 16 days
View Details
NAICS: 333912
Federal
Air Compressors and Maintenance PlanThis contract, solicited under FA9401-26-Q-0025, is a total small business set-aside for the procurement and installation of two Ingersoll Rand RS37i air compressors and one Polysep PSG-30 oil water separator, along with a comprehensive, multi-year maintenance plan for existing shop air compressor systems. The work requires a turnkey solution, including procurement, removal of existing units, disposal, installation, commissioning, and ongoing preventive and corrective maintenance for a total of nine air compressors, two oil separators, and three desiccant dryers currently in use. Equivalent equipment models are permitted, but bidders must submit full technical specifications and brochures for review. All equipment must meet strict performance criteria: each air compressor must deliver 120 PSI and 170 CPM, be air-cooled, and include an integrated or standalone desiccant dryer sized for dual-compressor output, while the oil water separator must handle 390 CPM with a 12-gallon absorption module and operate within a 32–120°F temperature range. The installation and maintenance must comply with manufacturer guidelines and military standards, including MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling. The contract includes a base year and four option years for maintenance, with performance required to maintain 95% air compressor availability. A written Maintenance Control Program must be submitted within 30 days of award, and quarterly on-site maintenance by trained personnel is mandatory, with detailed logs of all services performed. The contract mandates a one-year craftsmanship warranty, starting upon government sign-off, and requires submission of a Quality Control Plan and compliance with all applicable OSHA, EPA, and DoD security regulations. All contractors must be SAM-registered, small business verified, and comply with trafficking, antiterrorism, cybersecurity, and supply chain prohibitions, including those related to the Xinjiang Uyghur Autonomous Region and the Maduro regime. Proposals must be submitted via email by 1400 hours MDT on August 4, 2026, following strict formatting rules with separate technical and pricing volumes, and must remain valid for 30 days. A mandatory site visit is scheduled for July 16, 2026, at Kirtland AFB. Performance is F.O.B. destination at Kirtland AFB, New Mexico, with electronic invo
Air and Gas Compressor Manufacturing

POSTED

12 days ago

DEADLINE

in 15 days
View Details