Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Backplane Assembly and Integration Services

Open

Federal

Response Deadline11/20/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Backplane Assembly and Integration Services subcontract involves the assembly of electronic components onto PCBs for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the execution of SMT and through-hole soldering utilizing pick-and-place machines and reflow ovens, with strict adherence to MIL-PRF-81705 standards for ESD and EMI protection. The final deliverable consists of five fully assembled and tested backplane assemblies to be performed in Tracy, California. To qualify for this project, contractors must maintain ISO 9001:2015 certification and ensure full compliance with ITAR, EAR, and CMMC Level 2 requirements. This opportunity falls under NAICS code 334412 and is managed by the Department of Defense. Interested parties must respond by November 20, 2026.

General Info

DoD subcontract for five MIL-PRF-81705 backplane assemblies in Tracy, California by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-T-2529.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BACKPLANE ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 09:00:00 AM PSTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs assembly of electronic components onto PCBs for prime contractors on DLA Weapons Support Maritime Supply Chain projects. Executes SMT and through-hole soldering with ESD and EMI protection per MIL-PRF-81705. Uses pick-and-place machines and reflow ovens. Requires ISO 9001:2015, ITAR/EAR compliance, and CMMC Level 2. Delivers five fully assembled and tested backplane assemblies.

Similar Contracts

Same NAICS industry code

RETAINER-EJECTOR, ELECT

Solicitation # SPE4A1-27-T-0338

This solicitation, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of eight Retainer-Ejectors for electrical cards (NSN 5998-00-313-5275), identified as critical application items. The contract specifies a need ship date of May 4, 2027, with a final required delivery date of October 20, 2027, delivered FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. The items are classified as commercial products and must adhere to strict quality standards, including a zero non-conformance acceptance policy and sampling methods per MIL-STD-1916 or ASQ H1331. Due to the sensitive nature of the electronics, the contractor must utilize DOD-qualified Electrostatic Discharge (ESD) and Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items must be handled at approved field force protective work stations and marked according to MIL-STD-129, specifically using special marking code 39 for ESD sensitive devices. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment, and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity reporting, and the prohibition of certain telecommunications equipment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

BACKPLANE ASSEMBLY

Solicitation # SPE7M1-27-T-2529

The Defense Logistics Agency Weapons Support Maritime Supply Chain is soliciting the procurement of five backplane assemblies (NSN 5998-01-485-3488) under solicitation SPE7M1-27-T-2529. This small business set-aside is a full and open competition with a required delivery date of August 21, 2026, and a need ship date of April 21, 2026. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. Award evaluation is based on price, with a preference for HUBZone small businesses, and requires that the manufacturer's inspection system complies with ISO 9001:2015 or an equivalent standard. Notably, items produced via additive manufacturing are ineligible for award. The contract imposes strict technical and quality requirements, including mandatory compliance with the DLA Master List of Technical and Quality Requirements and specific packaging standards. Preservation and packing must follow Special Packaging Instruction AM12470962 and MIL-STD-2073-1E, with mandatory ESD and EMI protection per MIL-PRF-81705. Marking must adhere to MIL-STD-129. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract mandates cybersecurity compliance through CMMC Level 2 and NIST SP 800-171 assessment requirements. Payment and invoicing must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

59--ELECTRONIC COMPONEN

Solicitation # SPRPA127RXA34

Solicitation SPRPA127RXA34, issued by DLA Aviation at Philadelphia, is for the acquisition of electronic components, specifically identified as Critical Application Items (CAI), including NSN 5998-01-474-4622. This procurement is conducted under Emergency Acquisition Flexibilities (EAF) authority. The government intends to make a single award based on a determination of the most advantageous offer, with past performance weighted as more important than price. Evaluation of offerors will utilize the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. The contract requires strict adherence to quality and security standards, including ISO9001 and NIST SP 800-171. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipments and electrostatic discharge protection. All inspection and acceptance are performed at the origin. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for invoicing and receiving reports. The contractor must maintain the total equipment baseline configuration for all hardware, software, and firmware, with configuration control maintained by the NAVAIR Program Manager.

Pa DLA Aviation At Philadelphia

POSTED

about 17 hours ago

DEADLINE

MULTI FUNCTION DSPL

Solicitation # SPRMM126QHE19

This fixed-price solicitation, issued by DLA Mechanicsburg under FAR Part 18 Emergency Acquisitions, seeks the manufacture and delivery of Multi Function Display Shelves (NSN 6625-01-676-5421). The requirement specifies that items must conform to the design represented by Cage Code 53711, reference number 856623. Following Amendment 0001, the total quantity was reduced from 15 to 10 units, with the offer receipt deadline extended to November 20, 2026. Award will be determined based on Lowest Price Technically Acceptable (LPTA) criteria, with the government utilizing the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. Key contractual requirements include physical identification per MIL-STD-130 and preservation and packaging in accordance with MIL-STD-2073-1 or ASTM D3951-18 depending on the destination and urgency. All shipments must comply with ISPM 15 wood packaging standards. The contractor is responsible for inspection and acceptance at the point of origin. Administrative requirements mandate the use of the PIEE-WAWF system for electronic submission of invoices and receiving reports. Additionally, offerors must identify the Original Equipment Manufacturer (OEM) if they are not the manufacturer and maintain active registration in the System for Award Management (SAM).

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM127QKA89

This solicitation, issued by DLA Mechanicsburg for NAVSUP Weapons Systems Support, seeks the manufacture and delivery of one Circuit Card Assembly (NSN 5998-01-079-9759). The item must conform to the design represented by Cage Code 76301 and reference number 72D225718-1001. Award will be granted based on the Lowest Priced Technically Acceptable (LPTA) criteria, with the contracting officer evaluating item, price, and supplier risk via the Supplier Performance Risk System (SPRS). The contractor is responsible for all inspection and acceptance at the point of origin, and the government reserves the right to perform Product Verification Testing at a designated laboratory. Technical requirements include physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073, with specific ESD protection requirements following ANSI/ESD S20.20-2021 where applicable. All invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system. Offerors must be registered in the System for Award Management (SAM) and provide CMMC unique identifiers for information systems processing covered defense information. If the offeror is not the original equipment manufacturer, they must provide the OEM's CAGE code and part number, as refurbished materials are strictly prohibited.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

F-16 Plug-In Unit, Electr

Solicitation # SPRHA4-27-R-0073

Ut DLA Aviation At Ogden

POSTED

about 17 hours ago

DEADLINE

DISPLAY, OPTOELECTRONIC

Solicitation # SPE7M5-27-T-2716

Solicitation SPE7M5-27-T-2716 is a small business set-aside issued by the DLA Weapons Support Active Devices Division for the procurement of 109 optoelectronic displays, identified by NSN 5980-01-271-9925 and WAMCO part number KW-615-17. The contract specifies a delivery timeline of 213 days after order, with the destination of delivery being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance are both required at the destination, with the government serving as the responsible party for inspection under FAR 52.246-2. The procurement is subject to strict packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for all payment requests and receiving reports. Key regulatory clauses include DFARS 252.204-7012 for cybersecurity safeguarding, DFARS 252.204-7018 prohibiting certain telecommunications equipment, and the Buy American Act. All quotes must be submitted via the DIBBS portal, and the use of additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

59--ELECTRONIC COMPONEN, IN REPAIR/MODIFICATION OF

Solicitation # N0010427RNA26

This solicitation, issued by Navsup Weapon Systems Support Mech, seeks the repair and modification of 19 electronic components (NSN 5998-01-625-2221). The procurement is a rated order for national defense under the Defense Priorities and Allocations System. The contractor is required to provide an estimated repair price initially, followed by a firm-fixed price quote after a teardown and evaluation (TD&E) process, which must be completed within 180 days of receiving the carcasses. The award will be based on the lowest aggregate total price, including an option for an increased quantity of up to 100 percent of the original amount. Key technical requirements include strict adherence to electrostatic discharge control standards (ANSI/ESD S20.20) and a mandatory mercury-free requirement for use on submarines and surface ships. The contract specifies a requested repair turn around time (RTAT) of 364 days, with price reductions applied for failure to meet this deadline. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073, with specific requirements for Depot Level Repairable (DLR) labeling. Payment and receiving reports are to be processed electronically via the Wide Area Workflow (WAWF) system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Solicitation # N0010427QTA21

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is a Request for Quotation for the repair of one PWA DCI unit. The government is seeking a firm-fixed-price award with a required Repair Turnaround Time (RTAT) of 229 days, though accelerated delivery is encouraged. The award will be made to a single, responsible offeror based on a best-value determination where past performance is weighted as more important than price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System (SPRS) to assign color-coded ratings. The contractor is responsible for all inspection and testing according to original manufacturer specifications, with Government Source Inspection required. All items must be mercury-free and physically identified per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1 for military distribution, and all payment requests must be processed electronically via the Wide Area Workflow (WAWF) system. The deadline for submission of quotations is December 7, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

ELECTRONIC C/B CARD

Solicitation # N0010427QSA18

This solicitation, N00104-27-Q-SA18, is a Request for Quote (RFQ) issued by NAVSUP Weapon Systems Support for the repair of an Electronic C/B Card (NIIN 016154676). The Government is seeking a Repair Turnaround Time (RTAT) of 40 days, measured from the physical receipt of the asset to final acceptance. Award consideration is limited to authorized distributors of the original manufacturer. The contract utilizes a fixed-price structure, and the Government reserves the right to implement price reductions for unexcusable contractor delays in meeting the RTAT. The award will be based on a combination of past performance and price, with past performance serving as the primary evaluation factor. Technical requirements include adherence to original manufacturer specifications, MIL-STD-130 for marking, and MIL-STD-2073-1 for packaging. All freight is FOB Origin, with the Navy handling logistics via the Commercial Asset Visibility (CAV) system. Inspection and final acceptance will be performed at the contractor's facility by the Contract Administration Office. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0010426QSD48

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is a Request for Quotations for the repair of a Circuit Card Assembly (NIIN 200122289). The government seeks a single award based on the most advantageous offer, with past performance weighted more heavily than price. Offerors must provide a specific Repair Turnaround Time (RTAT), unit price, and total price, and must be authorized distributors of the original manufacturer to be considered for award. The solicitation is currently designated as unreviewed-unrestricted, with a response deadline of November 13, 2026. The contractor is responsible for all inspection and testing according to original manufacturer specifications, with records maintained for 365 days post-delivery. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073 and ASTM D3951-18 standards. Payment and receiving reports must be processed through the Wide Area Workflow (WAWF) system. While the solicitation mentions both FOB Destination and FOB Origin, it specifies that freight is handled by the Navy via the Commercial Asset Visibility (CAV) system. Government Source Inspection (GSI) is required, and final acceptance will occur at the contractor's facility.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QUA20

This solicitation, issued by NAVSUP Weapon Systems Support, is a Request for Quote (RFQ) for the teardown, evaluation, and repair of seven Circuit Card Assemblies (NIIN 013913396, Part 1811791). The government requires a firm-fixed price (FFP) for the repair, and quotes limited only to test and evaluation will not be accepted. The award will be made to a single, authorized repair source based on the most advantageous offer, with past performance weighted as more important than price. The government has requested a Repair Turnaround Time (RTAT) of 31 days after receipt of assets, and failure to meet this timeline may result in a price reduction via a Reconciliation Modification. Additionally, the government seeks a 100% option to increase the order quantity for a period of 365 days from the award date. Technical requirements include adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and DFARS 252.211-7003 for Item Unique Identification (IUID). The contractor must utilize the Commercial Asset Visibility (CAV) system for reporting and the Wide Area WorkFlow (WAWF) system for invoicing and payment. Quality assurance is the contractor's responsibility, though the government reserves the right to perform inspections to ensure compliance with original manufacturer specifications. The contract also mandates compliance with cybersecurity maturity model certification and DFARS 252.204-7012 for safeguarding covered defense information. All inspection records must be maintained for 365 days following final delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

Fluid Filter Element Manufacturer (NSN 4330-01-007-0976)This subcontract involves the manufacture and supply of 22 high-precision fluid filter elements, identified by NSN 4330-01-007-0976, for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating the elements according to Sargent Aerospace and Defense LLC part number 3189017 specifications and ensuring all units are delivered to DLA Distribution San Joaquin in Tracy, California. Strict adherence to military standards is required for quality and logistics, including sampling per MIL-STD-1916 or ASQ H1331, packaging according to MIL-STD-2073-1E, and marking per MIL-STD-129. The project falls under NAICS code 333995 and is managed under the Department of Defense.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of NEMA-WC27500 Electrical Power CableThis subcontract involves the procurement of 500 feet of high-specification electrical power cable, part number M27500A14SB3U23, to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The cable must strictly adhere to NEMA-WC27500 and QPL-WC27500 standards. Additionally, the supplier is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000 regulations. The contract requires full compliance with the Buy American Act. Delivery of the materials is specified as FOB Origin to the DDSP facility located in New Cumberland, Pennsylvania. This requirement falls under NAICS code 327113 and is managed by the Department of Defense.

Porcelain Electrical Supply Manufacturing

POSTED

about 12 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Weapons Support Maritime Supply Chain projects. The scope of work involves the specialized packaging of components according to MIL-STD-2073-1E, marking shipments per MIL-STD-129, and palletizing materials based on RP001 standards. All deliverables must utilize MIL-SPEC packaging materials and labeling systems to ensure they are shipment-ready for transport to DLA Distribution San Joaquin. The project is managed under the Department of Defense for the DLA Weapons Support Maritime Supply Chain, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 20, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully palletized components that meet strict military specifications.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Manufacturing of TEE, PIPE TO BOSS (NSN 4730014851708)This subcontract involves the manufacture of 22 pipe-to-boss tee fittings under NSN 4730014851708 for the DLA Weapons Support Maritime Supply Chain. The selected contractor is responsible for fabricating the units in strict accordance with provided technical data and specifications, ensuring all finished components are fully inspected prior to delivery. To qualify, the manufacturer must maintain a quality management system compliant with either SAE AS9003 or ISO 9001 standards and adhere to all Buy American regulations. The project falls under NAICS code 332999, with the place of performance located in Tracy, California.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports the DLA Weapons Support Maritime Supply Chain by providing specialized surface treatments and coatings for prime contractors. The selected provider must apply finishes in strict accordance with TDP Rev A Gen 2 and associated reference drawings, ensuring that all coatings maintain critical tolerances and preserve the integrity of IUID markings. The contractor is required to hold ISO 9001:2015 certification and must manage all hazardous materials according to 29 CFR 1910.1200(g) regulations. Performance will take place in Tracy, California, with the primary objective being the delivery of finished components that meet all specified Department of Defense standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 12 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract for Aerospace Grade Raw Material Supply involves the sourcing and delivery of certified raw stock for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The supplier is required to provide materials that strictly adhere to the specifications outlined in TDP Rev A Gen 2 and reference drawing 19205 7791602, while maintaining full compliance with the DLA Master List of Technical and Quality Requirements. To ensure complete traceability, the contractor must provide comprehensive material certifications and Mill Test Reports for all delivered stock. The performance of this contract is centered in Tracy, California, under NAICS code 331210, supporting the Department of Defense.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 12 hours ago

DEADLINE

Precision Machining of Housing Subassembly ComponentsThis subcontract involves the high-precision machining and fabrication of housing subassembly components for the DLA Weapons Support Maritime Supply Chain. The scope of work requires the production of machined and deburred parts in strict accordance with TDP Rev A Gen 2 and several specific reference drawings. All components must feature IUID marking compliant with MIL-STD-130 standards. The project is governed by strict regulatory requirements, including ITAR/EAR compliance and CMMC Level 2 certification. Performance of the contract will take place in Tracy, California, under NAICS code 332710. Interested parties must adhere to the established timeline, with a response deadline set for November 20, 2026.

POSTED

about 12 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the DLA Weapons Support Maritime Supply Chain by providing specialized packaging for sensitive electronic components. The contractor is responsible for ensuring all materials are processed and marked according to MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 standards, utilizing military-specification preservation and cushioning for FOB Origin shipment. The project is based in Anniston, Alabama, and requires the contractor to maintain CMMC Level 2 certification to handle technical shipping documents. Interested parties must respond by November 20, 2026, to provide shipment-ready components under NAICS code 488410 for the Department of Defense.

Motor Vehicle Towing

POSTED

about 12 hours ago

DEADLINE

Manufacturing of Instrument Shunts (NSN 6625-01-355-8906)This subcontract involves the manufacture of nine precision instrument shunts under NSN 6625-01-355-8906 for the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to ISO 9001:2015 inspection systems and sampling standards per MIL-STD-1916 or ASQ H1331. Final products must be packaged according to MIL-STD-129 and MIL-STD-2073-1E and delivered to Anniston. Compliance requirements are stringent, necessitating CMMC Level 2 certification and full ITAR/EAR compliance. Additionally, the manufacturing process must strictly prohibit the use of hexavalent chromium. This effort falls under NAICS code 333515 and is managed by the Department of Defense.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The scope of work involves providing military-grade packaging and palletization for cable reels, ensuring strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 standards for palletization. The final deliverables consist of fully processed shipments ready for transport to Hill AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110. Interested parties must respond by November 20, 2026, to provide these specialized logistics services for prime contractors.

General Warehousing and Storage

POSTED

about 12 hours ago

DEADLINE

Special Purpose Electrical Cable ManufacturingThis subcontract involves the manufacture and supply of special purpose electrical cable for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for providing 42,000 feet of cable that meets NSN 6145-01-204-3481 specifications, delivered to Hill AFB, Utah. The cable must be wound on 500ft reels with a minimum length of 50ft per piece. The project is designated as a Total Small Business Set-Aside under NAICS code 335929. Strict adherence to regulatory requirements is mandatory, including compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Responses to the solicitation are due by November 20, 2026.

Other Communication and Energy Wire Manufacturing

POSTED

about 12 hours ago

DEADLINE

Radio Frequency (RF) Cable Supply (NSN 6145013353058)This subcontract involves the supply of 15,000 feet of Radio Frequency Cable for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The materials must be manufactured or sourced in accordance with NSN 6145013353058 and the DLA Master List of Technical and Quality Requirements. Strict adherence to the Buy American Act and the Berry Amendment is required, with packaging following ASTM D3951, MIL-STD-129, and RP001 standards. Delivery is specified as FOB Origin. The opportunity is a total small business set-aside under NAICS code 334413 for the Department of Defense. Performance will take place at Robins Air Force Base. Interested parties must respond by November 20, 2026, to provide the required RF cable quantities.

Semiconductor and Related Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QHC05

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

CLOSED

about 8 hours ago

Solicitation # SPRMM126QHF69

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

CLOSED

about 8 hours ago

59--ELECTRONIC COMPONEN, IN REPAIR/MODIFICATION OF

Solicitation # N0038325RB313

Navsup Weapon Systems Support

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS