Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

BACKSHELL, ELECTRICA

Awarded
SPE7M525P4670Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE7M525P4670 to Benchmark Connector Corporation, CAGE 08MA2, for the supply of an electrical backsheel with NSN 5935-01-193-5995, with a final contracted quantity of 558 units at a unit price of $5.69, resulting in a total contract value of $3,175.20. The award was issued on July 17, 2026, following a modification to the original order that reduced the quantity from 575 to 558 units, resulting in a price reduction of $96.39. This adjustment was authorized under RFO 13.302(a) and PAR 5502336, with administrative changes governed by FAR 43.103(b), and documented via Standard Form 30, which designated Option D for other modifications. The contracting officer is Conrad Patton, reachable through DLA Land and Maritime, Fluid Handling Division in Columbus, Ohio, with a remittance address listed for invoice payments, though specific payment instructions, electronic invoicing methods, or bank details are not included. The contract is categorized under NAICS code 335999 for other miscellaneous manufacturing, with no socioeconomic set-aside indicated, and no certifications regarding small business status, affirmative action, or labor standards were documented. Packaging, inspection, acceptance criteria, and specific military standards such as MIL-STD-129 or MIL-STD-2073 are not explicitly stated. The place of performance and FOB terms are not specified, though the contractor is located in Sunrise, Florida. No period of performance, option periods, key personnel designations, or special requirements like security clearances are outlined. The contractor is required to comply with the modification’s terms and deliver the revised quantity, with no additional line items or options present. Standard contract administration procedures apply, including payment processing through the designated DLA office, but there is no listing of a contracting officer’s representative or technical representative, and no attachments are itemized beyond reference to CASE ID #5502336, which incorporates all associated documentation by reference.

General Info

Benchmark Connector Corporation to supply backsheel electrical for $3,175.20 under DOD contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$3,175.2

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

BENCHMARK CONNECTOR CORPORATIONView Profile

Award Issued Date

Documents

(1)

SPE7M525P4670_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
DLA award SPE7M525P4670 posted on DIBBS. Awardee: BENCHMARK CONNECTOR CORPORATION (CAGE 08MA2) Total Contract Price: $3,175.20 Award Date: 07-17-2026 Line items: - BACKSHELL, ELECTRICA (NSN/Part 5935011935995, PR 7012676289)

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
Federal
Headlamp
Solicitation # SPMYM426Q3630
This solicitation, numbered SPMYM426Q3630, seeks quotations for headlamps under a brand name specification and is designated as a Small Business Set Aside with no size limitation other than small business status. Offerors must provide traceability documentation linking the supplied headlamps directly to the original manufacturer, with acceptable proof including authorized distributor letters, manufacturer website listings, or official quotations from approved sources; failure to submit this information will render the quotation technically unacceptable. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, and vendor responsibility will be assessed via PPIRS in accordance with FAR 9.104. Respondents are required to complete the HMDRFQINFO form on pages 23–26 of the solicitation and clearly indicate their business size classification, whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer, and confirm dealer independence for pricing. The CAGE code, place of manufacture, and country of origin must also be declared. Delivery must be FOB destination to Pearl Harbor Naval Shipyard, with estimated delivery times specified in calendar days. The shipping address is in Pearl Harbor, Hawaii, and all proposals must be submitted by the deadline of August 11, 2026. The contracting office is DLA Maritime – Pearl Harbor, with Quincey Dillenback as the primary point of contact.
DLA Maritime - Pearl Harbor

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
Federal
61--STRIP,ELECTRICAL GR
Solicitation # N0038326QFB30
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to procure ten electrical strip assemblies, part number 06552-00811-111 and NSN 1R-6150-016901821-H5, on a sole source basis from Sikorsky under the existing Basic Ordering Agreement N00383-26-G-P401. No technical drawings or data are available to the government, and it does not hold any rights to the intellectual property necessary to source this item from alternative vendors, necessitating exclusive reliance on Sikorsky as the only capable supplier. The procurement is justified under 10 U.S.C. 3204(a)(1) and FAR 6.302, with source approval already applied to the NSN, and no competitive process is anticipated. Although all responsible sources may submit capability statements or quotations, the government explicitly states that no other supplies or services will satisfy its requirements, and any proposals received within 45 days will only be evaluated to determine if competition is feasible. Firms not already approved to manufacture the item must submit a Source Approval Request, but the procurement will proceed without delay for such approvals. The acquisition will follow FAR Part 15 procedures, excluding the commercial item policies of FAR Part 12, and is not designated as a Small Business Set-Aside. All submissions must be made electronically via email to the designated point of contact, with no hard copies or telephone inquiries accepted, and the solicitation will be posted on NECO.
Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335999
New
Federal
BOAST RFOP - Branched Wiring Harnesses - NSNs: 6150-01-702-8103 and 6150-01-702-7450
Solicitation # PANDTA_26_P_0000_035558
The U.S. Army Contracting Command - Detroit Arsenal is soliciting proposals under the Basic Ordering Agreement Sustainment Track program for a Firm-Fixed-Price order of branched wiring harnesses identified by NSNs 6150-01-702-8103 and 6150-01-702-7450, with part numbers 12592422 and 12592423, respectively. This is a total small business set-aside, and only vendors with a fully executed BOAST Basic Ordering Agreement in place by the September 4, 2026, deadline are eligible to respond. The requirement calls for 132 units of the first NSN and eight units of the second, with a 200% option ceiling on each quantity. Evaluation is strictly price-based under a Lowest Price Technically Acceptable (LPTA) methodology, with no technical, past performance, or management factors considered. Proposals must be submitted electronically via email with a specified subject line format, and late submissions will be rejected. All amendments and updates to the solicitation will be communicated exclusively through the SAM.gov posting, and offerors are responsible for monitoring it regularly. All supplies must meet stringent packaging, preservation, and marking standards per MIL-STD-2073-1 (Level B packaging, Method 41 preservation, ASTM D4169 Distribution Cycle 18 testing), MIL-STD-129 (with mandatory DoD barcoding), and MIL-DTL-117 for bagging. Cable ends must be protected using MIL-PRF-22191 or A-A-3174 compliant materials, and void fill must use approved cushioning materials. Inspection and acceptance occur at the contractor’s origin facility, despite FOB Destination shipping terms, and First Article Testing is mandatory for both line items with corresponding reports submitted prior to production. The contractor must comply with counterfeit electronic part detection requirements, hazardous material labeling, and CUI protection standards per NIST SP 800-171 and 800-88. Export control restrictions apply, requiring JCP certification to access the Technical Data Package. Offerors must maintain current SAM.gov registrations including UEI and CAGE codes, and affirmatively certify compliance with clauses covering arms control violations, Russian energy use, and foreign-made unmanned aircraft systems. Delivery timelines require FAT units within
W6QK Acc- Dta

POSTED

about 14 hours ago

DEADLINE

in 28 days
View Details
NAICS: 335999
New
Federal
RFQ - Buckley SFB Rectifier Inverter System Replacement
Solicitation # FA254326Q0011
The government is soliciting offers for the full replacement of a rectifier/inverter/power distribution system located in Building 730, Room 132 at Buckley Space Force Base, Colorado, to ensure reliable power for Department of Defense long-haul communications. The system must integrate commercial, generator, and uninterruptible power supply inputs to deliver stable DC power and must meet or exceed the performance of the existing Lorain Power System Model 1231v1, with a minimum capacity of 2,800 amps and integration with existing DC breaker panels. The contractor is required to fully remove and dispose of all existing equipment, install equivalent or improved C&D Technologies MS Endur II battery strings, and provide complete operator training and manuals. Performance must be completed within 180 calendar days after contract award, and delivery is FOB destination at Buckley SFB. This is a full small business set-aside under NAICS code 335999 with a 600-employee size standard, and all offerors must be registered in SAM.gov and provide a valid CAGE or Unique Entity ID. The solicitation follows a Lowest Price Technically Acceptable evaluation method, where technical acceptability and past performance are pass/fail criteria, and award will be made to the lowest-priced offeror who meets all mandatory technical and performance requirements, including submission of two recent and relevant performance citations. The solicitation, identified as FA254326Q0011, requires a single-volume proposal including a technical narrative that demonstrates capability to fulfill all requirements, a quote, warranty details, and company information. No options are available. Site visit attendance is highly encouraged and mandatory for all offerors seeking to adequately assess conditions; attendees must be sponsored onto the base by 1000 Mountain Time on July 31, 2026, and submit their names by July 29, 2026. Questions must be submitted by August 5, 2026, at 1300 Mountain Time, after which the quote submission deadline will be officially amended. The current quote due date is not yet finalized but is expected to follow the resolution of questions, with initial submissions due no later than August 6, 2026, at 1100 Mountain Time. Proposals must be submitted to the designated Contracting Officer and Contract Specialist via electronic means, with payment processed through WAWF using DoDAACs F87
FA2543 460 Cons

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 483110
New
DIBBS
Domestic and International Freight Logistics to FPO AddressesThe contract requires coordination and execution of domestic and international freight logistics to transport battery assemblies to FPO addresses aboard U.S. Navy vessels, ensuring all shipments adhere to military logistics protocols and utilize exclusively U.S.-flag carriers. The work involves managing the full supply chain from origin to final delivery, with strict compliance to Department of Defense standards for handling sensitive military cargo, including timely delivery, secure transit, and accurate documentation through military shipping channels. Performance is centered on FPO 09565, and all operations must align with Navy and DLA requirements for reliability and security in sensitive military environments. This is a small business set-aside subcontract under the NAICS code 483110, designated for total small business participation, meaning only businesses certified as small by the SBA are eligible to bid. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and successful bidders will be expected to demonstrate proven capability in military freight logistics, familiarity with FPO delivery systems, and experience handling hazardous or high-value battery shipments under strict regulatory oversight.

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Hazardous Materials HandlingThe contract requires full compliance with MIL-STD standards for the packaging, preservation, labeling, and hazardous materials documentation of battery shipments destined for military locations, ensuring all procedures meet rigorous defense logistics requirements. This subcontract is a total small business set-aside under the SBA program, limiting eligibility to qualified small businesses and emphasizing support for small business participation in defense supply chains. The NAICS code 493190 identifies the work under Other Support Activities for Transportation, reflecting logistics and handling services critical to defense operations. The place of performance is designated as FPO 09565, indicating shipments will be delivered to U.S. military facilities overseas, likely through military postal channels. All work must adhere to strict safety and regulatory standards for hazardous materials, particularly batteries, which demand precise labeling, containment, and documentation to ensure safe transport and handling. The opportunity was posted on August 5, 2026, with a response deadline of August 14, 2026, giving potential bidders approximately nine days to submit proposals. The contract is managed by the Defense Logistics Agency under the Department of Defense, underscoring its importance to the broader military supply chain and operational readiness.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 7 days
View Details