Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BACKSHELL, ELECTRICAL C

Active
SPE7M5-26-Q-0785Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a backsheel electrical connector assembly with NSN 5935-01-385-1947, quantity of 17 units, under solicitation SPE7M5-26-Q-0785, with delivery required within 80 days of award. The item is classified as a critical application and must comply strictly with SAE AS85049/25C and SAE AS85049F technical standards, and is subject to Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements, meaning all components must originate exclusively from sources listed on the official DLA-maintained QPL/QML. The supplier must ensure no intentional addition of mercury or mercury-containing compounds, except in permitted functional applications such as batteries or instruments, and portable devices with mercury must include double containment per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in any phase of manufacture, testing, or cleaning unless explicitly authorized in writing by the contracting officer. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and shipment must occur via traceable means excluding parcel post to the designated Carderock Division address in Bethesda, Maryland. Inspection and acceptance occur at destination under a firm fixed price with zero variance allowed in quantity. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero nonconformances permitted unless otherwise contracted, and critical, major, and minor attributes are assigned specific verification levels or AQLs. The supplier acknowledges full compliance with all DLA packaging, quality, and environmental requirements integrated via referenced technical and quality documents from the DLA Master List, and the item is designated for government use with delivery scheduled for June 25, 2026.

General Info

Procure 17 backsheel connectors per SAE AS85049 standards, QPL/QML compliant, no mercury or ozone-depleting substances, deliver to Carderock by June 25, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

SUPPLY/SERVICE: 5935-01-385-1947 CONT'D, BETHESDA, MD, 20817-5700, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
TATE SHANNON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADAPTER,CABLE CLAMP TO CONNECTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL
ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION
REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR
FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
BACKSHELL,ELECTRICAL CONNECTOR
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
SPE7M5-26-Q-0785
SECTION B
SUPPLY/SERVICE: 5935-01-385-1947 CONT'D
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 4 IAW BASIC NON GOVT STD SAE AS85049/25C REVISION NR C DTD 12/01/2025 PART PIECE NUMBER: M85049/25-12W
TDP Rev B Gen 4 IAW REFERENCE NON GOVT STD SAE AS85049F REVISION NR F DTD 04/01/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5935-01-385-1947 17.000 EA $ _______________ $ ______________
BACKSHELL
,ELECTRICAL
CONNECTOR
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 80 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:A1 OPI:O INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N00167
NSWC CARDEROCK
CARDEROCK DIVISION
9500 MACARTHUR BOULEVARD
SPE7M5-26-Q-0785
SECTION B
SUPPLY/SERVICE: 5935-01-385-1947 CONT'D
BETHESDA MD 20817-5700
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N00167
NSWC CARDEROCK
CARDEROCK DIVISION BLDG 143
9500 MACARTHUR BOULEVARD
BETHESDA MD 20817-5700
US
M/F: (TCN) N0016761693387
RDD: 176
PROJ: TV4 TP 2
SUPP ADD: N00167 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 07
DIC: A4A DIST: 9B ADV: 2L FC: HO
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017334123 0001 N/A N/A N/A 06/25/2026

SPE7M5-26-Q-0785 NSN/Part Number: 5935-01-385-1947 Quantity: 17 EA Purchase Request: 7017334123QTY: 17 Delivery: 80 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-Q-0794
The contract specifies the procurement of 23 electrical plug connectors identified by NSN 5935-01-615-4375, with a firm fixed price and zero variance allowed in quantity. The item must comply with MIL-DTL-38999/26G and MIL-DTL-38999N specifications, and is subject to qualification requirements under the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts. All supplies must adhere to DLA packaging standards, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling, with no special marking required. The item must be physically marked in accordance with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Delivery is required at the DLA Distribution center in New Cumberland, Pennsylvania, within 100 days after award, with inspection and acceptance occurring at destination. Transportation and shipping instructions follow DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7M5-26-Q-0794 with a response deadline of August 6, 2026, and the material is needed for delivery no later than February 7, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
BRACKET, ELECTRICAL
Solicitation # SPE7M5-26-Q-0783
The contract pertains to the procurement of a single electrical bracket identified by NSN 5935-01-664-4142, with delivery required within 90 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Configuration change management for materials related to the Edgewood Chemical Biological Center is subject to formal variance requests. Physical identification of the item must follow specified marking standards. The bracket incorporates technical data subject to U.S. export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed DLA’s mandatory training and questionnaire and received formal approval. The solicitation, issued under number SPE7M5-26-Q-0783, was posted on July 29, 2026, with responses due by August 13, 2026, and performance is designated for Starke, Florida, 32091-9794. The contracting office is the Department of Defense’s Active Devices Division, with Barbara Hoffmann as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0784
This contract is for the procurement of 13 electrical receptacle connectors identified by NSN 5935-01-710-7039 under solicitation SPE7M5-26-Q-0784, with a firm fixed price and no variance allowed in quantity. The item must comply with MIL-DTL-38999N Rev N and MIL-DTL-38999/24J Rev J technical specifications, and is subject to the Qualified Products List (QPL) requirements under procurement note H01 for Federal Stock Class 5935. The use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited without prior written approval from the Contracting Officer, although this restriction does not apply to commercial items as defined by FAR 11.001 or part-numbered-only items. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking code required. The item must be delivered within 150 days after the award date to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract specifies origin FOB terms and includes detailed transportation instructions referencing DLAD Proc Notes C19 and C20. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The item is listed on the QPL or QML, making qualification compliance mandatory, and engineering change proposals or deviations require formal requests under RQ002. The contract is managed by the Department of Defense’s Active Devices Division, with the point of contact being Tate Shannon.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-357W
This procurement contract is for a connector receptacle identified by NSN 5935012397761 and part number MS3452W14S-5SX, compliant with SAE AS34521C and SAE AS50151E technical standards. The item is classified as a qualified product requiring adherence to the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. Strict prohibitions apply against the use of ozone-depleting substances in any phase of design, manufacturing, or testing unless written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are strictly banned except in specific functional applications such as batteries, fluorescent lights, sensors, or instrument controls, with additional containment requirements mandated. The item is designated as a critical application component subject to full and open competition, with no set-aside exceptions. The contract requires delivery of 22 units within 56 days, FOB origin, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must conform to MIL-STD-2073-1E with marking per MIL-STD-129 and no special marking codes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must comply with DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-357W, with a response deadline of August 10, 2026, and a required ship date of October 6, 2026. The unit price is $22.00 per unit, resulting in a total contract value of $484.00, and the North American Industry Classification System code is 334417. The primary point of contact is Margaret Smith of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-022Z
This contract specifies the procurement of a single electrical connector receptacle, identified by NSN 5935-01-520-5319 and part number D38999/20JE35JN, meeting technical standards MIL-DTL-38999/20H and MIL-DTL-38999N, with revisions dated August 2022 and September 2023 respectively. The item is a qualified product under QPL requirements for Federal Stock Class 5935, and material from specific manufacturers—Amphenol, Matrix, and Pyle National—with lot date codes between July 2006 and June 2016 is prohibited, as is any unit from Deutsch Engineered Connecting manufactured prior to July 2013. Traceability documentation may be required to verify manufacturing dates and origins. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging standards. The unit of issue is each, with a quantity of one, and delivery is required within five days FOB origin with zero variance allowed. Inspection and acceptance occur at origin. The item is destined for MH-60 Romeo Sikorsky Australia at Yerriyong, with freight handled by Multi Air Freight C O DHL via the Australian Gov Cargo Office. The contract solicitation number is SPE7M0-26-T-022Z, with a required delivery date of July 31, 2026, and the point of contact is Gerard Quinn of the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M0-26-T-023D
The contract specifies the procurement of a single electrical backsHELL, Part Number 51QD3-20-11-1-B, with NSN 5935998736012, for delivery to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, under solicitation SPE7M0-26-T-023D. Delivery is required within five days of award, with FOB destination terms, zero variance allowed in quantity, and inspection and acceptance occurring at the delivery point. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, including RQ017 for physical identification and IP025 for packaging, and must conform to MIL-STD-129 for marking and labeling. Commercial packaging per ASTM D3951 applies only if the item is non-hazardous, but DLA’s requirements override any conflicting commercial standards. Palletization must follow RP001, and the item must be shipped via the fastest traceable means, strictly prohibiting parcel post. The shipment is designated as a vessel delivery with reference to DLAD PROC NOTES C19 and C20, and a valid vendor shipment message must accompany the order. The contract requires adherence to all referenced DLA technical standards, and the original delivery date is July 24, 2026, with no need for a requested ship date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
RETAINER, ELECTRICAL
Solicitation # SPE7M5-26-T-357Y
The contract pertains to the procurement of 165 units of a RETAINER, ELECTRICAL CONNECTOR with NSN/Part Number 5935-01-532-6039, under solicitation SPE7M5-26-T-357Y, issued by the Department of Defense’s Active Devices Division. The delivery deadline is set at 112 days after award, and responses are due by August 10, 2026. Technical and quality requirements referenced in the solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition size. The item is subject to critical compliance obligations including configuration change management, physical identification standards, and removal of government identification from non-accepted supplies. Technical data associated with this item is controlled under export regulations—either ITAR or EAR—and may not be disclosed or exported to foreign persons, including foreign nationals in the United States or overseas subsidiaries, without prior authorization. Access to this controlled data is restricted to contractors who hold US/Canada Joint Certification Program certification, have completed DLA-mandated export control training, and have received formal approval from DLA. The place of performance is identified as New Cumberland, Pennsylvania, with Karen Collins as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M0-26-T-023G
The contract pertains to the procurement of a connector, plug, electric, identified by NSN 5935-00-093-1054, with a quantity of ten units required under solicitation SPE7M0-26-T-023G. Delivery is mandated within five days of award, with shipment occurring FOB origin and no tolerance for quantity variance. The item must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping materials, and container specifications, and all marking must adhere to MIL-STD-129 with no additional special marking required. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbered clauses, and govern procurement regardless of acquisition size, with revisions tied to solicitation or amendment dates. The contract specifies three qualified suppliers—TE Connectivity Corporation, RTI DGE LLC, and Northrop Grumman Systems Corporation—each with distinct part numbers, and all deliveries must be routed to the designated freight forwarding address in Melbourne, Florida, with an international destination at AIA de Cuers Pierrefeu in France. The contract requires compliance with hazardous materials handling protocols under IP025 and includes specific government tracking codes and identifiers such as DIC A01, DIST F9B, and ADV 2L for logistical and financial processing. The original required delivery date is August 3, 2026, with no need ship date specified, indicating a firm scheduled delivery window. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, under a federal acquisition system using the NAICS code 334417. Point of contact for inquiries is Gerard Quinn at the Department of Defense, with all documentation tied to DLA’s eProcurement systems and unit of issue standards derived from official ANSI X12 references. The item is classified for use by the Maritime Supply Chain ESOCS Buys organization, with full traceability required from manufacturer through final delivery to the specified overseas staging area.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTR
Solicitation # SPE7M5-26-Q-0793
The contract specifies the procurement of 136 retaining plates for electrical connectors, identified by NSN 5935-01-413-0422, under solicitation SPE7M5-26-Q-0793. The item is designated as a critical application and qualifies under the Qualified Products List for Federal Stock Class 5935, requiring strict adherence to procurement note H01. Technical compliance is governed by SAE AS85049F Rev F dated 04/01/2021, with reference also made to SAE AS85049/95C Rev C dated 04/01/2011. The item must conform to DLA’s Master List of Technical and Quality Requirements, and all quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 sampling plans with zero non-conformances required unless otherwise stated. Attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The contract prohibits the intentional use of mercury or mercury-containing compounds except in specific exemptions such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, and mandates shockproof design with secondary containment for any portable mercury-containing devices. Use of Class I ozone-depleting substances is strictly forbidden in manufacturing or cleaning unless written approval is obtained from the contracting officer. Packaging must comply with MIL-STD-2073-1E, using preservative methods including drying, vacuum sealing, and appropriate wrapping materials, with marking requirements aligned to MIL-STD-129 and no special markings applied. Delivery is FOB origin with a firm fixed price and zero tolerance for quantity variance, with inspection and acceptance occurring at destination. Delivery must be completed within 90 days after award date, and all shipments shall be directed to DLA Distribution Cherry Point, North Carolina. The item is part of a federal procurement under NAICS code 334417 with a specified need date of November 20, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5782
The contract specifies the procurement of two units of a military-grade connector receptacle with NSN 5935-01-666-5493, manufactured to the MS27505E13F4S standard in accordance with MIL-DTL-38999N Revision N dated September 14, 2023, and referenced against MS27505G Revision G dated October 29, 2024. All components must originate exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List, and commercial substitutes are strictly prohibited without prior written government authorization. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the delivery point. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 requirements. The items are to be shipped via the fastest traceable means, excluding parcel post, to the USS GERALD R FORD CVN 78 at FPO AE 09523. The contract mandates use of the designated vendor shipping method and references specific DLA procedural notes for transportation logistics. The required delivery date is July 27, 2026, with the solicitation issued under contract number SPE7M2-26-T-5782 and managed by the Department of Defense’s Nuclear Reactor Program, with primary point of contact Alisha Blanton.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
Electronic Component Manufacturing – Connector Adapter SupplyThe contract requires the manufacture and delivery of five units of the RP001 defense connector adapter, fully compliant with all U.S. Department of Defense packaging, marking, and military specifications. The product must meet stringent quality and performance standards set by the defense sector, ensuring operational reliability in mission-critical applications. Delivery is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and all units must be properly documented and labeled in accordance with federal military logistics requirements. This is a subcontract under the NAICS code 334417 for Electronic Component Manufacturing, issued by the Active Devices Division of the Department of Defense. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026. The contract is part of a broader supply chain initiative to source specialized defense components and is accessible via the DIBBS platform. Vendors must ensure full adherence to military compliance standards, as failure to meet specifications could result in rejection or contract termination. All work must be completed within the specified timeline to support timely integration into defense systems.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
RF Cable Assembly Manufacturing and TestingThe contract awards the manufacture and testing of 100 RF cable assemblies annually under strict military standards, requiring full lifecycle configuration control and comprehensive quality assurance processes to ensure consistent performance and traceability. All work must comply with applicable defense regulations and be performed with rigorous documentation to maintain integrity across production, testing, and delivery phases. The solicitation is set aside exclusively for small businesses as defined by the SBA, aligning with FAR 19.5, and falls under NAICS code 334417 for communications equipment manufacturing. The contract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 7, 2026, and was posted on July 28, 2026. Performance location details are not specified, and no point of contact is listed in the release. Subcontractors seeking to respond must demonstrate capability in high-reliability RF assembly, adherence to military specifications, and the ability to sustain quality control throughout the product’s lifecycle. All bids must be submitted through the designated DIBBS portal prior to the deadline.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-357E
The contract is for the procurement of three fuse cartridges identified by NSN 5920-01-431-5562 and part number 071489, supplied by Dover Corp Groen Div. Delivery is required within 20 days FOB destination with zero variance allowed in quantity, and inspection and acceptance occur upon arrival at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking aligned with MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited unless functionally embedded in approved devices like batteries, fluorescent lamps, sensors, or weapon systems, and portable mercury-containing items must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery address is the USNS PILILAAU T AKR 304 at FPO AP 96675, and transportation procedures follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M5-26-T-357E with a required delivery date of July 27, 2026, and is governed by technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issuance date. The NAICS code is 334220, and the contracting activity is the Department of Defense’s Active Devices Division, with Matthew Stanko listed as the primary point of contact.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONTACT ASSEMBLY, EL
Solicitation # SPE7M5-26-T-357Q
The contract pertains to the procurement of one unit of a contact assembly identified by NSN 5999-01-453-2144 and part number W40 under solicitation SPE7M5-26-T-357Q, with a required delivery within 20 days of award. Delivery is FOB destination, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, it must be commercially packaged in accordance with ASTM D3951 while still complying with all DLA packaging mandates. Palletization must follow RP001 guidelines, and all government identification must be removed from non-accepted supplies as per RQ011, with physical identification of bare items governed by RQ017. The delivery destination is USNS PILILAAU T AKR 304 in FPO AP 96675, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract includes a required delivery date of July 27, 2026, and the solicitation was posted July 29, 2026, with responses due by August 10, 2026, under a NAICS code of 335931. All vendor interactions require use of the VSM system, and government-use-only fields include specific codes for identification, distribution, and fulfillment.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAL
Solicitation # SPE7M5-26-T-358C
This contract is for the procurement of a digital microcircuit identified by NSN 5962010245938 and part number GEM45621BCA under Federal Supply Class 5962, with a total quantity of 28 units at a unit price of $28.00. The item is classified as a commercial item and requires strict adherence to DLA technical and quality requirements, including supply chain traceability documentation as mandated by DLA Procurement Note C03 (Aug 2016). The contractor must maintain and submit comprehensive traceability and test records, which must be emailed to the designated DLA address no later than 15 days before delivery, with each submission limited to under 15 megabytes and properly labeled using a prescribed naming convention. Delivery is FOB origin with inspection and acceptance occurring at destination after written authorization from the contract administrator; shipment without this approval renders payment non-final. The microcircuit must be marked per IPC/JEDEC J-STD-609 for lead finish identification and labeled in compliance with MIL-STD-129, with unit packaging containing the completed DLA Land and Maritime Form 918 and shipment authorization confirmation. Strict ESD and EMI protective packaging per MIL-PRF-81705 is required, using qualified materials from approved manufacturers on QPL-81705, and cushioning must meet A-A-59136 Class 1 Grade B density standards with thickness sufficient to prevent lead damage. The item is subject to a zero-defect sampling plan under MIL-STD-1916 or equivalent, and the contractor must comply with DLA packaging, preservation, and palletization standards. Mercury and mercury compounds are prohibited in or on the item except for specified exempted applications. The supplier must retain all supply chain documentation for the duration of the contract and adhere to CMMC Level 2 cybersecurity self-assessment requirements. The delivery deadline is 164 days from contract award, with the original required delivery date set for May 10, 2027.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-357P
The contract is for the procurement of eight antennas with NSN/part number 5985-99-671-2175 under solicitation SPE7M5-26-T-357P, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Deliverables must be shipped within 225 days after contract award, and the place of performance is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The offeror must submit a complete data package covering both the approved part and any alternate part, and the government’s identification must be removed from non-accepted supplies. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code is 334220. Primary points of contact include Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245, with additional details accessible through the DIBBS portal linked in the contract data.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
HEAT SINK-INSULATOR
Solicitation # SPE7M5-26-Q-0792
The contract pertains to the procurement of a single unit of a heat sink-insulator, identified by NSN 5999-33-208-8134, under solicitation SPE7M5-26-Q-0792, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 90 days after award, with the shipment destined to FPO AA 34092 aboard the USS NEW YORK LPD 21, and must be sent via the fastest traceable freight method, explicitly prohibiting parcel post. The item must be packaged in strict compliance with MIL-STD-2073-1E, including packaging method 31, drying and preservation standards, and labeling per MIL-STD-129 with no special marking required, while palletization follows DLA’s packaging guidelines. The specification references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and designates the product as a critical application item. Multiple vendor part numbers are accepted, including those from CONSILIUM MARINE & SAFETY AB, CONSILIUM MARINE US INC, and L3 MAPPS LTD. The contract is issued under the DoD’s authorized unit of issue, with the purchase request number 7017613294 and a required ship date of May 21, 2026.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-357R
The contract pertains to the procurement of three electronic modules, identified by NSN 5963-20-001-8264 and part number 843-05, manufactured by Pivotal Power Inc, with delivery required within 84 days of contract award, FOB origin. The item is designated as an ESD-sensitive electronic device and must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specialized ESD and EMI protective materials per MIL-PRF-81705, requiring Type I barrier material for both ESD and EMI protection, with the supplier responsible for ensuring all packaging materials originate from qualified manufacturers listed on QPL-81705. Packaging must include adequate cushioning to prevent damage to pins and leads, and must be palletized according to DLA packaging standards RP001, with special marking code 39 indicating ESD sensitivity. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the delivery point. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 334418, with a contract value of $9.00 for three units at $3.00 each, and the original required delivery date is May 3, 2027, with a need ship date of November 3, 2026. Compliance with all technical and quality requirements referenced in the DLA Master List is mandatory, governed by the revision in effect on the solicitation issue date.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, MET
Solicitation # SPE7M5-26-T-357Z
This contract specifies the procurement of a fixed metallized paper-plastic capacitor identified by NSN 5910-01-222-2473 and part number M83421/01-5233S, governed by military specification MIL-PRF-83421F and its amendment MIL-PRF-83421/1F. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions in effect as of the solicitation issuance or award date depending on acquisition size. Manufacturing processes are strictly prohibited from using any Class I ozone-depleting substances unless explicit written approval is obtained from the contracting officer, and this restriction supersedes all conflicting specifications while maintaining performance standards. The item is listed on the Qualified Products List, requiring adherence to qualification standards and documentation. The contractor must deliver 58 units under a firm fixed price contract with zero variance in quantity, FOB origin, and delivery required within 85 days of contract award, with an original delivery date of February 4, 2026. Packaging must conform to MIL-STD-2073-1E with specific preservation methods and packaging codes, and labeling must follow MIL-STD-129 including the special marking code ZZ for unique requirements. Each unit package must be marked in accordance with IPC/JEDEC J-STD-609 to clearly identify lead content, with markings placed as specified in the standard. Hazardous materials handling, shipping, and transportation are governed by DLAD procedural notes C19 and C20, and all items are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is managed under solicitation SPE7M5-26-T-357Z, with point of contact Samuel Cooper and a response deadline of August 10, 2026, issued under NAICS code 334416 for electronic component manufacturing.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-357T
The contract is for the procurement of three circuit breakers identified by NSN 5925-01-730-8062 and part number C10F3TM040 from Schneider Electric USA, Inc., under solicitation SPE7M5-26-T-357T, issued by the Department of Defense’s Active Devices Division. Delivery is required within 147 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The quantity is fixed at three units with no variance allowed, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 marking and RP001 palletization standards; non-hazardous items must meet ASTM D3951 unless overridden by a higher-priority DLA technical requirement. Hazardous materials must follow TQ requirement IP025 as defined by FED-STD-313. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds except in specified functional applications such as batteries, fluorescent lights, and weapon systems, and requires secondary containment for portable mercury-containing devices per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned entirely, and any alternative substances must be approved unless explicitly permitted by specification. The item is designated as a critical application item, and covered defense information requirements apply. All packaging and labeling must include the correct unit of issue and quantity per unit pack as specified, with delivery directed to the DLA Distribution facility at the provided address. The original required delivery date is January 18, 2027, with a need ship date of January 5, 2027.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-357M
The contract is for the procurement of six electromagnetic relays with NSN 5945-12-338-7533 and part number 390.10.0066 from Vincorion Power Systems GmbH, issued under solicitation SPE7M5-26-T-357M. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including marking as per MIL-STD-129 with special marking code ZZ-ZZ. The unit of issue is each, priced at $6.00, totaling $36.00. The contractor must apply lead status markings on each unit package in strict accordance with IPC/JEDEC J-STD-609, identifying lead content or Pb-free status, with placement governed by the standard’s section 6.2. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The end recipient is the Royal Jordanian Air Force, with shipment directed to Muwaffaq Salti AB, Jordan, under RDD 777 and governed by specific DLA transportation procedural notes. The delivery deadline is set for July 27, 2026, and the contract data includes a primary point of contact at DLA with email and phone details for inquiries.
Relay and Industrial Control Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details