Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAFFLE, AIRFLOW, NONA

Active
SPE4A6-26-T-13VTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 25 units of the Baffle, Airflow, NONA with NSN 2835-01-674-5028 under solicitation SPE4A6-26-T-13VT, with a delivery requirement of 177 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to RP001, RQ011, RQ017, RQ006, RQ009, RQ001, and RQ032, which establish packaging standards, identification marking protocols, inspection procedures, and tailored quality controls applicable to both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be verified at designated levels or AQLs. Certificate of Conformance and Certificate of Quality Compliance documentation is mandatory, and contractors must comply with CDRL requirements as outlined in the Technical Data Package. The item is subject to strict export control under ITAR or EAR regulations, with technical data classified as restricted and prohibited from dissemination to foreign persons without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to this data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory export control training, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 333611, and the performance location is designated as Texarkana, Texas, with Ashley Jones-Turner as the primary point of contact.

General Info

Procure 25 Baffle, Airflow, NONA units with strict quality, export control, and compliance requirements under ITAR/EAR.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-13VT DLA Aviation Aug 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ashley JONES-TURNER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAFFLE,AIRFLOW,NONA
BAFFLE, AIRFLOW, NONA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
SPE4A6-26-T-13VT
SECTION B
export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2835-01-674-5028 Quantity: 25 EA Purchase Request: 7016782405QTY: 25 Delivery: 177 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
Federal
61--Hydraulic Turbine Runner for Units A2 and N7 for H
Solicitation # 140R3026R0016
The contract solicitation 140R3026R0016 issued by the Bureau of Reclamation, Lower Colorado Regional Office in Boulder City, Nevada, seeks a contractor to furnish and install hydraulic turbine runners for Units A2 and N7 at Hoover Dam, with a period of performance spanning from December 15, 2026, to December 14, 2028. The scope of work encompasses the complete design, manufacturing, and delivery of two new turbine runners along with associated components including stationary wear rings, coupling nuts and washers, in-place machining services, air admission piping, and all required drawings, bonds, and mobilization activities. Detailed specifications, 48 pages of technical specifications, and 14 pages of engineering drawings mandate strict adherence to ASME standards including B46.1-2019, BPVC-2025, Y14.1-2020, and Y14.5-2018, with manufacturing required to use ASTM A743 Grade CF-3 material and undergo rigorous non-destructive testing protocols per ASTM A802, A903, and other relevant criteria. All components must meet exact dimensional tolerances, and any casting with more than five defects failing acceptance criteria will be rejected in its entirety. The contract imposes comprehensive compliance requirements under the Federal Acquisition Regulation, including ethical conduct provisions such as prohibitions on gratuities, contingent fees, kickbacks, and improper influence, along with mandatory adherence to a contractor code of business ethics. Offerors must submit proposals electronically by August 10, 2026, to Virginia Toledo via email, structured in three volumes covering administrative, technical, and pricing elements, with full completion of Section G.4 personnel data and submission of a detailed subcontracting plan. Payment requests must be submitted through the Treasury’s IPP system with strict formatting rules and exclusion of personally identifiable information, and the final invoice must be clearly labeled. The contractor is responsible for ensuring all employees comply with federal security protocols at Hoover Dam, including possession of government-issued identification, and must safeguard all controlled unclassified information under Reclamation Directive SLE 02-01. Prevailing wage rates apply, Buy American Act requirements govern materials, and performance and payment bonds are mandatory. Award is contingent upon meeting all solicitation terms, demonstrating responsibility under FAR Part 9, and having a fair and reasonable price, with no weighted evaluation factors specified beyond these
Lower Colorado Regional Office

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
Federal
61--CONTROL,GENERATOR, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QHA67
The contract pertains to the procurement of one unit of a generator control component, identified by NSN 7R-6110-014522467-KB, under a sole-source acquisition authorized under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition. Delivery is FOB origin, with early and incremental deliveries accepted, and all contractual documents are deemed officially issued upon electronic transmission or mailing. Only previously approved sources may respond, as the item requires specialized engineering knowledge, unique manufacturing capabilities, and proprietary technical data that are not commercially available to the Government, making qualification of alternative sources impractical within the procurement timeline. Prospective offerors not already approved must submit complete source approval documentation from the NAVSUP Weapon Systems Support brochures, detailing their experience with the same or similar items, or provide proof of a pending approval request; failure to comply will result in proposal rejection. The Government retains full discretion to award based on fleet support needs if source approval cannot be finalized in time. Solicitation responses are due by September 21, 2026, and while the procurement is not competitive by intent, all interested parties may submit capability statements within 45 days for consideration, though no competition is anticipated. Technical specifications and standards referenced are obtainable through ASSIST-Online or DODSSP, but critical engineering data such as drawings and deviation lists are not available through these channels. The contracting officer may consider proposals based on commercial items submitted within 15 days of notice, though the acquisition is not being conducted under FAR Part 12 policies.
Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333611
New
Federal
28--HARNESS ASSEMBLY
Solicitation # SPE4A526T335R
The contract solicitation seeks a single harness assembly with NSN 2835012050728, requiring a quantity of 14 units to be delivered to W1A8 DLA DISTRIBUTION within 169 days after contract award. The approved source for this item is identified as vendor 63005 with part number 23007027, and only electronic quotes will be accepted. This is a full and open competition under RFQ SPE4A526T335R, with no set-aside restrictions, allowing all responsible sources to submit responses provided they meet the deadline. The solicitation is not available in hard copy; all information must be accessed electronically through the provided SAM.gov link, and no technical specifications, plans, or drawings are provided to offerors. The procurement falls under NAICS code 333611 and is managed by DLA Aviation under the Department of Defense, with inquiries directed to the designated point of contact via email. The solicitation was posted on August 6, 2026, and responses are due by August 14, 2026.
DLA Aviation

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
Federal
28--FILTER SYSTEM,AUXIL
Solicitation # SPE4A626Q0563
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 15 units of the auxiliary filter system with NSN 2835015360539 under solicitation SPE4A626Q0563, which is a Small Business Set Aside for total award. The requirement is to deliver the items to DLA Distribution Cherry Point with a delivery deadline of 207 days after award, and only approved sources, identified as 0GCA0 104002-101 and 78286 70070-30316-011, are eligible. The solicitation is issued as an RFQ with no hard copies available; all submissions must be electronic and received by the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and all responsible sources may respond provided their quotes are submitted on time. The NAICS code is 333611, and the point of contact for questions is listed as DibbsBSM@dla.mil, with additional information accessible via the SAM.gov link provided. The office managing this procurement is located in Richmond, Virginia.
DLA Aviation

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURB
Solicitation # SPE4A5-26-T-331F
The contract pertains to the procurement of 75 units of a SHROUD SEGMENT, TURB with part number 5200T09G01 and NSN 2840-01-691-7435, issued under solicitation SPE4A5-26-T-331F by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 363 days of contract award, with shipments to be delivered FOB origin and inspected and accepted at the destination point: DLA Distribution Cherry Point in North Carolina. The item is classified as a Critical Application Item, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and labeling instructions provided; no special marking is required. Sampling and inspection must follow MIL-STD-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requiring zero non-conformances unless otherwise specified. The supplier must adhere to DLA packaging requirements, configuration change management protocols, and the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, as this contract involves Covered Defense Information. All documentation must align with the DLA Master List of Technical and Quality Requirements, and any deviation or waiver must be formally requested. The unit of issue is each (EA), and the total contract value is based on a unit price for 75 units, with no variance allowed in quantity. The required delivery date is August 12, 2027, and transportation logistics are governed by DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
DIBBS
FAIRING, FRAME, AIRCR
Solicitation # SPE4A0-26-T-4076
The contract is for the procurement of one fairing and frame assembly for an aircraft gas turbine engine, identified by NSN 2840-01-651-2647 and part number 52G169-01 from RTX Corporation, with a required delivery within five days of order placement and a target delivery date of June 17, 2026. The item must be delivered FOB destination to Lajes Field, Building T-605, Terceira Island, Portugal, and is designated a critical application item requiring strict adherence to technical and quality standards. Compliance is mandated with MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification (IUID), with no special marking required beyond these standards. Traceability documentation must be retained in accordance with DLA Directive Procurement Note C03, and Federal Aviation Administration airworthiness approval (RQ019) and bare item marking (RQ046) requirements apply. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, using zero non-conformances unless otherwise specified, and unspecified attributes treated as major with an AQL of 1.0. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, and the contractor must maintain current SAM registration and provide accurate UEI and CAGE codes. The contract includes multiple DFARS and FAR clauses governing cybersecurity, safeguarding covered defense information, whistleblower rights, hazardous material labeling, use of U.S.-flag vessels for ocean transport, acceleration of payments to small business subcontractors, and prohibition of restrictive internal confidentiality agreements. The contract is fixed-price and utilizes Wide Area WorkFlow (WAWF) for all invoicing and receiving reports. No unit price or total contract value is provided, and while the solicitation includes numerous compliance and administrative requirements, no formal evaluation factors or award classification are specified.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333611
New
DIBBS
Commercial Off-The-Shelf (COTS) Fuel Pump SupplyThe contract pertains to the supply of commercial off-the-shelf electrical fuel pumps that fully comply with National Stock Number (NSN) requirements and U.S. military specifications, with the core deliverable identified under CLIN 0001. These fuel pumps must meet stringent military standards for performance, durability, and reliability, and must be packaged in accordance with approved defense logistics protocols to ensure readiness and field compatibility. The procurement is structured as a subcontract under the Department of Defense and is managed by the LAND SUPPLIER OPNS VEHICLE SPT organization, with performance expected to occur at Fort Campbell, Kentucky, specifically at the 42223-0000 zip location. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, indicating a compact twelve-day window for interested parties to submit proposals. The North American Industry Classification System code 333611 categorizes this as a business involving engine and engine parts manufacturing, aligning the suppliers with those capable of producing high-integrity automotive and defense-grade components. Although no set-aside designation or point of contact is specified, the requirement is clearly focused on NSN-compliant COTS products, emphasizing speed of delivery and proven military suitability over custom engineering. All proposals must demonstrate adherence to DoD packaging and documentation standards to ensure seamless integration into existing supply chains and logistics networks.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
MODULATOR ASSEMBLY,
Solicitation # SPE4A5-26-T-325G
The contract specifies the procurement of one unit of a Modulator Assembly, Exciter, Ignition, identified by NSN 2920-01-573-0929 and part numbers 0-300-261-01 for Honeywell International Inc. and V0-300-261-01 for Vericor Power Systems LLC. It is classified as a commercial item and is designated as a critical application item requiring strict adherence to labeling, packaging, and marking standards per MIL-STD-129 and MIL-STD-2073-1E, with no special marking codes required. Packaging must comply with DLA packaging requirements, including use of intermediate and unit containers coded E5, and palletization standards. The item is subject to tailored higher-level quality requirements, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is due in 171 days, with an original required delivery date of September 25, 2027, and a need ship date of January 31, 2027. The contract specifies FOB origin delivery, with zero variance permitted in quantity, and requires compliance with hazardous materials shipping protocols. The item is not subject to Item Unique Identification per customer request. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with the procurement executed under a total small business set-aside, NAICS code 333611. All documentation, including unit of issue and transportation instructions, references DLA procedural notes and official DLA web resources. The sole point of contact for the solicitation is Evgeny Korovin, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
BLADE SET, COMPRESSO
Solicitation # SPE4A6-26-T-12LW
This contract pertains to the procurement of a single blade set for a non-aircraft gas turbine compressor, identified by part number 10-10012-01, manufactured by Honeywell International Inc. and sourced through Vericor Power Systems LLC. The item is governed by stringent technical and quality requirements incorporated from the DLA Master List, with compliance mandated across manufacturing, documentation, packaging, and inspection processes. All supplies must meet zero-defect sampling standards under MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring the strictest verification levels. The blade set is designated as a critical application item and must be mercury-free, with no intentional use of mercury or mercury-containing compounds except in permitted exceptions such as specified instruments or batteries, all of which must include secondary containment per NAVSEA standards. Packaging and marking must fully adhere to MIL-STD-2073-1E and MIL-STD-129, with individual blades separated to prevent contact and damage, and palletization conforming to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance performed at origin, and the item must be delivered within 20 days to Camp Pendleton, California, via traceable means exclusively—parcel post is prohibited. The NSN is 2835-01-538-6223, and the contract includes specific logistics, transportation, and marking directives, with a required delivery date of July 29, 2026. Configuration control, engineering change proposals, and deviation requests are tightly managed under RQ002, and all documentation must support source approval per RC001. The contract enforces full traceability, government identification removal procedures for non-accepted items, and tailored quality requirements applicable to both manufacturers and non-manufacturers.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
BRACKET, DUCT
Solicitation # SPE4A7-26-T-616K
The contract pertains to the procurement of a bracket, duct with part number 5170T16G01, supplied by Thermal Structures, Inc and General Electric Company, under NSN 2840-01-666-6902. A total quantity of 36 units is required, to be delivered FOB origin within 190 days from the contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the origin, and all items must comply with stringent quality and documentation requirements as defined by DLA’s Master List of Technical and Quality Requirements identified by R and I numbers, including tailored higher-level quality standards. The sampling method must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical attributes must be verified at Level VII or with an AQL of 0.1. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. All items must be palletized per RP001, and the delivery destination is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA’s procurement directives, including transportation and freight guidelines, and the unit of issue is each (EA). The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under NAICS code 333611, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
BRACKET, SCAVENGER
Solicitation # SPE4A7-26-T-616H
The contract specifies the procurement of a BRACKET, SCAVENGER under solicitation SPE4A7-26-T-616H with a firm-fixed-price of $36.000 per unit for a total quantity of 36 units, resulting in a contract value of $1,296.00. The item is identified by NSN 2840016666891 and must be manufactured, inspected, and delivered in full compliance with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ011 for removal of government identification, RQ017 for bare-item marking, and RT001 for measuring and test equipment calibration. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in samples unless otherwise stated, with critical, major, and minor attributes assigned specific verification levels or AQLs, and unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E with clean/dry preservation and unit containers marked E5, while labeling follows MIL-STD-129 with no special marking required, and palletization must meet DLA’s RP001 requirements. Delivery is FOB origin, with a 190-day delivery schedule ending September 10, 2027, and final destination is DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination point by the government, and all shipments must use WAWF for invoicing and receiving reports. The contract includes mandatory cybersecurity clauses such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring compliance with NIST SP 800-171 controls, along with prohibitions on hexavalent chromium, hazardous materials storage, transportation on foreign-flag vessels without waiver, and unauthorized arbitration agreements. Offerors must hold a valid UEI and CAGE code, certify their small business status if applicable, and comply with whistleblower protections and disclosure requirements. All submissions must be made electronically through DIBBS by August 12, 2026, and no paper submissions are permitted.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
PLATE, COMPONENT MOUNTI
Solicitation # SPE4A5-26-T-329N
The contract pertains to the procurement of a component mounting plate for aircraft gas turbines, identified by part number 5168T10G01 and NSN 2840-01-667-1342, with a requirement for 12 units to be delivered within 190 days from the contract award. The item is designated as a critical application component, subject to stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All supplies must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special marking codes applied. Sampling and inspection procedures follow MIL-STD-1916 or Asq H1331 zero-based plans, with critical, major, and minor attributes assigned corresponding verification levels or AQLs unless otherwise specified; any unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot, with inspection and acceptance occurring at the destination. The delivery is FOB origin, with no variance allowed in quantity, and the sole delivery point is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA procurement system, with transportation rules outlined in DLAD PROC NOTES C19 and C20, and the supplier must adhere to the referenced technical specifications and quality provisions without exception.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 000000
New
DIBBS
Unable to Decompose Prime ContractThe contract titled Unable to Decompose Prime Contract was posted on August 6, 2026, with a response deadline of August 21, 2026, and is classified as a subcontract opportunity under the Department of Defense through the ASC COMMODITIES DIVISION. No solicitation number, set-aside type, or NAICS code is provided, and critical details such as the point of contact, office address, and place of performance are incomplete or undefined. Despite the absence of substantive information required to break down the prime contract into subcontract opportunities, the associated link directs users to the DIBBS platform for potential further access. The system encountered a configuration error preventing data decomposition, leaving key procurement specifics undetermined.

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-R-XC33
This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Department of Defense’s DLA Aviation, Commodity Division, for the procurement of 90 units of a critical application cable assembly identified by NSN 5995-01-628-8998, with a guaranteed minimum order of 22 units per year and a maximum order limit of 90 units per delivery. The contract has a firm fixed price structure with no variance allowed in quantity, and delivery is required within 350 days after order award. The total estimated contract value is capped at $350,000, which serves as the aggregate spending limit across all orders issued over the five-year base period, during which orders may be placed for up to 1,825 days after the award date. The item is specified as a Mercury Mission Systems LLC part number 4585-05000-15-301, with strict prohibitions against the intentional introduction of mercury or mercury-containing compounds into the hardware, except for approved functional uses in batteries, fluorescent lights, weapons systems, and NAVSEA-specified reagents, which must include secondary containment and shock-proof design per NAVSEA 5100-003D. All supplies must comply with DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, and technical compliance is enforced through sampling methods in accordance with MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must adhere to MIL-STD-2073-1E with specific parameters for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special markings required. Palletization must conform to DLA Packaging Requirements RP001. Inspection and acceptance occur at destination, and the contractor must maintain a government-approved inspection system, with Product Verification Testing conducted by the government at a designated lab prior to shipment; failure results in rejection of the entire lot. The contractor is also required to comply with stringent regulatory provisions including restrictions on hexavalent chromium, toxic material disposal, Buy American preferences, prohibitions on procurement from Xinjiang, antit
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-R-XA86
This contract solicits the procurement of 358 machine bolts with NSN 5306-01-096-5596 under solicitation number SPE4A6-26-R-XA86, issued by the Defense Logistics Agency’s Commodities Division under the Department of Defense. The delivery deadline is set at 736 days after contract award, with responses due by August 18, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, inspection at origin, configuration change management, and export control of technical data are strictly governed by specific DLA requirements including RQ002, RQ009, and RQ032. The technical data associated with this item is subject to ITAR or EAR, and its disclosure to foreign persons—even within the United States—is prohibited without prior authorization. Contractors must be approved by DLA, hold valid US/Canada Joint Certification Program status, and have completed mandatory training and questionnaire compliance to access export-controlled data. Documentation for source approval, removal of government identification from non-accepted items, and bare item marking are required. The point of contact for inquiries is Ashley Hardy, reachable via email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-R-XC37
This contract is an Indefinite Delivery Purchase Order (IDPO) issued by the Defense Logistics Agency Aviation, Commodity Division, for the procurement of 140 cable assemblies, Radi, identified by NSN 5995-01-675-7639 and manufacturer part number 12006-7181-A30 from L3Harris Technologies, Inc. The base period spans five years with an estimated annual demand of 140 units and a guaranteed minimum quantity of 35 units per year, with a total contract ceiling of $350,000. Delivery orders may be issued for up to 140 units per order, with a required delivery window of 245 days after receipt of order, under FOB origin terms. The contract is firm fixed price with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with the government retaining the right to reject the entire lot if product verification test samples fail at a government-designated lab; shipment is prohibited until acceptable test results are received unless otherwise directed. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, unit containers, and labeling directives. Special marking requirements mandate bold text on external packages stating “Product Verification Test Samples - Do Not Post to Stock” along with contract and lot numbers, and the special marking code is set to zero, indicating no additional markings. Packaging and palletization must adhere to DLA’s RP001 requirements, while documentation must include a hard copy of the system of record receiving report. Sampling and quality control follow MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. All technical and quality requirements referenced by 'R' or 'I' numbers are incorporated from the DLA Master List, and the contractor must comply with regulations governing the removal of government identification from non-accepted supplies, physical item marking, and documentation for source approval requests. The contract includes mandatory DFARS clauses on whistleblower rights, antiterrorism training, litigation support restrictions, subcontracting with state sponsors of terrorism, hazard labeling, and payment instructions via WAWF. Offer
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 483111
New
DIBBS
U.S. Flag Ocean TransportThe contract specifies the ocean transportation of defense supplies using U.S.-flagged vessels, strictly adhering to the Defense Federal Acquisition Regulation Supplement section 252.247-7024, which mandates the use of American-owned and crewed ships for military cargo. The work is to be performed with a primary place of performance in San Diego, California, and falls under the NAICS code 483111 for ocean freight transportation. This is a subcontract opportunity issued by the ASC Commodities Division of the Department of Defense, with responses required by August 13, 2026, and the solicitation posted on August 5, 2026. All transportation services must comply with federal regulations ensuring national security and maritime sovereignty, making vessel ownership, flag status, and crew nationality critical factors in vendor eligibility.
Deep Sea Freight Transportation

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls outlined in NIST SP 800-171 to safeguard Controlled Unclassified Information related to defense contracts, ensuring full compliance with DFARS cyber incident reporting obligations. This subcontract is focused on securing Covered Defense Information through the establishment of robust technical, administrative, and physical safeguards aligned with federal standards, with performance specifically tied to the location in San Diego, CA, 92136-3581. The effort is governed under NAICS code 541512, indicating it involves computer systems design and related services, and is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and must include demonstrated capability to meet all required security controls, maintain compliance over time, and properly report any cyber incidents as mandated by regulation.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Preservation ServicesThe contract is for packaging and preservation services requiring strict adherence to military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all supplies are securely packaged, preserved, and labeled with compliant barcode systems for defense logistics. This subcontract is managed by the ASC Commodities Division under the Department of Defense, with performance required at a specified location in San Diego, California, with a ZIP code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with the NAICS code 561910 indicating it falls under Other Support Activities for Transportation. The work demands precision in material handling and documentation to meet federal military specifications, with all packaging and labeling rigorously verified for compatibility with DoD supply chain systems.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 424690
New
DIBBS
Hazardous Materials Handling and LabelingThe contract requires the supply and proper labeling of hazardous materials in full compliance with OSHA’s Hazard Communication Standard and DFARS regulations, including the timely submission of Safety Data Sheets for all chemical products. All materials must be accurately identified, labeled, and documented to ensure workplace safety and regulatory adherence across the supply chain. Performance of the work is designated for San Diego, California, with the Department of Defense’s ASC Commodities Division serving as the contracting entity under NAICS code 424690 for other chemical and allied products merchant wholesalers. The opportunity is structured as a subcontract and is open for responses until August 13, 2026, with proposals submitted through the DIBBS platform. Compliance with federal standards for hazardous material handling is mandatory, and failure to meet labeling, documentation, or submission requirements may result in rejection or contract termination.
Other Chemical and Allied Products Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Defense-Grade Component Supply (SPM-Coded Parts)The contract pertains to the supply of specialized defense components identified by SPM codes, with strict requirements for quality conformance and origin inspection to ensure compliance with military standards. All delivered items must meet exacting technical specifications and undergo verification of source authenticity, as these components are critical to national defense systems. The work is to be performed in San Diego, California, at the designated postal code 92136-3581, and the subcontract is issued under the NAICS code 332999 for other fabricated metal product manufacturing. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with the contracting office隶属于 the ASC Commodities Division of the Department of Defense. Participation requires full adherence to defense procurement protocols and ability to demonstrate consistent quality control processes for sensitive military hardware.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
Fastener Supply (Machine Bolts and Hardware)The contract calls for the supply of standardized machine bolts and hardware items in full compliance with National Stock Number specifications, ensuring strict adherence to military-grade quality and interchangeability standards. All items must be packaged and labeled according to Defense Logistics Agency requirements, with precise marking, unit packaging, and documentation to support seamless integration into DoD inventory and distribution systems. Performance is exclusively slated for San Diego, CA, with delivery and compliance obligations tied to the designated ZIP code 92136-3581. The contract is structured as a subcontract under NAICS code 332312, issued by the ASC Commodities Division of the Department of Defense, with responses required by August 13, 2026, and the solicitation posted on August 5, 2026.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Small Business Program Representation & Certification SupportThe contract seeks support for small business representation and certification services, specifically assisting contractors with HUBZone, WOSB, SDVOSB, and SDB certifications, as well as UEI and CAGE code registrations. These services are critical for ensuring Eligibility for federal contracting set-asides and accessing procurement opportunities reserved for small and disadvantaged businesses. The work is scoped under NAICS code 541611, indicating management consulting services, and is structured as a subcontract. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and the place of performance is located in Jacksonville, Florida, with a zip code of 32212-0103. The contracting activity falls under the ASC Commodities Division of the Department of Defense, indicating the need for precise and compliant representations to support defense-related procurement efforts.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Agency (DLA) Packaging & Marking ServicesThe contract requires specialized packaging and marking services for shoulder bolts in strict compliance with Department of Defense standards, specifically MIL-STD-2073-1E and MIL-STD-129. All items must be properly containerized, barcoded, and labeled to ensure uniformity and traceability across the defense supply chain, with attention to detailed requirements for marking content, positioning, durability, and material compatibility. The work must be executed to meet the Defense Logistics Agency’s rigorous specifications for readiness and interoperability, ensuring that the packaged components are ready for immediate deployment without additional handling or reconditioning. The solicitation is classified as a subcontract under NAICS code 493190, with a response deadline of August 13, 2026, and performance expected to be centered in Jacksonville, Florida, at the ZIP code 32212-0103. The contracting office falls under the ASC Commodities Division of the Department of Defense, indicating this effort supports critical logistics operations for military inventory management. Although no set-aside designation is specified, participants must be prepared to demonstrate full compliance with all technical, procedural, and documentation requirements outlined in the referenced military standards to be considered for award.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details