Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

BAG, URINAL

Active
SPE2DH-26-T-5425Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the purchase of 3 packages of urinal bags, each containing 20 absorbent urinal bags designed to replace traditional plastic urinals while enabling accurate measurement of diuresis and laboratory analysis, suppressing odors, and reducing cleaning requirements. The item, identified by NSN 6530-01-608-6210 and part number 939Y37373, is regulated by the FDA as a Class I medical device and must comply with all applicable marketing requirements including registration, listing, labeling, and GMP standards, even though a 510(k) submission is not required. The product must be marked in accordance with Medical Marking Standard No. 1, superseding all references to MIL-STD-129, and packaged per MIL-STD-2073-1E and DLA packaging requirements, with each unit sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest freight rate. Delivery is due within 20 days, FOB destination, to Fort Bragg, North Carolina, with no tolerance for quantity variance. The shipment must be sent via traceable means and not by parcel post. Packaging and labeling must adhere strictly to DLA and medical marking standards, including the inclusion of required government and commercial markings, and palletization must follow RP001 guidelines. The contract falls under solicitation SPE2DH-26-T-5425, issued by the Department of Defense’s Medical Supply Chain FSH, with a required delivery date of July 24, 2026. All technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply, and the contractor must ensure full compliance with medical device regulations and marking protocols as outlined in the procurement documentation.

General Info

Purchase of 3 packages of 20 FDA-regulated urinal bags for Fort Bragg, delivery by July 24, 2026, DLA-compliant packaging and labeling.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLD A5474 PRATT ST, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5425.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS

Full Description

Show more
BAG,URINAL
BAG, URINAL
PACKAGE OF 20 SPECIAL FEATURES: BAG, URINAL, ABSORBENT; MAY BE USED TO
REPLACE PLASTIC URINALS, SUPRESSING CLEANING, WHILE STILL ENABLING
MEASUREMENT OF DIURESIS AND ANALYSIS; ELIMINATES ODORS; PACKAGE OF 20
CAGE: 1Y3X1 P/N: 939Y37373
UNIT OF ISSUE PG(PACKAGE)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
REGULATION 876.5250 CLASS I EVEN THOUGH A 510(K) IS NOT REQUIRED, IT IS NECESSARY TO MEET OTHER REQUIREMENTS FOR MARKETING. THESE INCLUDE: REGISTRATION AND LISTING, LABELING OR GMP'S.
SHALL BE MARKED IAW THE LATEST EDITION OF THE MEDICAL MARKING STANDARD NO. 1 https://www.dla.mil/Logistics-Operations/Packaging/
RIVERSIDE HOME MEDICAL SUPPLY INC 1Y3X1 P/N 939Y37373
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE2DH-26-T-5425
SECTION B
PR: 7017584395 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017584395 0001 PG 3.000
NSN/MATERIAL:6530016086210
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
SPE2DH-26-T-5425
SECTION B
PR: 7017584395 PRLI: 0001 CONT’D
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
MARKFOR
W50YF2
0051 MD CO MEDICAL LOGISTI
AWCF SSF
BLD A5474 PRATT ST
FORT BRAGG NC 28310
US
M/F: (TCN) W50YF262020025
RDD: 216
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE2DH-26-T-5425 NSN/Part Number: 6530-01-608-6210 Quantity: 3 PG Purchase Request: 7017584395QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
CHIP, TRAININGThe contract pertains to the procurement of a single unit of a simulation training chip designed for use with chip measurement systems, identified by NSN 6630-01-482-4380. The item is classified as an electronic detector tube system with a unit of issue specified as each. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. The product must comply with DLA packaging standards, including commercial packaging as specified in the procurement document, with each unit sealed in a container that protects against damage and is shipped in exterior containers suitable for safe delivery via common carrier at the lowest cost. All packaging and labeling must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must clearly display the date of manufacture, expiration or retest date, and the contract number or lot number. The item must have a shelf life of 24 months, with no more than three months having passed from the date of manufacture to the date of delivery to the government, and all shelf life markings must adhere to the latest revision of MMS1C. The acquisition is part of a federal solicitation issued by the Department of Defense under contract number SPE2DH-26-T-5444, with a response deadline of July 30, 2026, and a delivery requirement of five days after order award. The point of contact for the solicitation is Ryan Sullivan of DLA Troop Support.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 331313
New
DIBBS
VALVE, BALL ANLRThe contract is for a single ball valve, ANLR, identified by NSN 6530-01-546-3565 and part number 700321 Rev J from Getinge USA Inc, with a purchase request number 7017596580 and a unit quantity of one. Delivery is required within 20 days to a military destination at FPO AP 96673, shipped FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with commercial standards as specified for medical acquisitions, using sealed unit containers capable of preventing damage, and exterior shipping containers must ensure safe, cost-effective transport by common carrier. All marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions are referenced from DLA’s guidelines. The item is regulated by the FDA as a Class II device requiring a 510(k) along with compliance for registration, labeling, and GMP. Mercury or mercury-containing compounds are prohibited unless specifically exempted, and any portable devices containing mercury must include shockproof design and a secondary containment. Technical and quality requirements are governed by the DLA Master List, with revision control tied to the solicitation or award date. The contracting official must submit an EBS referral to confirm FDA compliance, including manufacturer and item details. The contract is issued under solicitation SPE2DH-26-T-5467, with a response deadline of July 30, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.
Alumina Refining and Primary Aluminum Production

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details