Ball Bearing

Nashville Electric Service is soliciting bids under solicitation number Z4882 for the procurement of four swivel ball bearings. The required components must feature an approximate overall length of 6-3/8 inches, an overall diameter of approximately 1-3/8 inches, a minimum jaw opening of 1/2 inch, and a pin diameter of either 1/2 inch or 7/16 inch. A critical technical requirement is that the pin must be slotted for use with a standard screwdriver, and the unit must support a minimum working load of 7,000 lbs. Approved manufacturers and part numbers include SLINGCO ZSW2096 and LEWISMFG HD-1, though equivalent products are acceptable provided that descriptive literature is attached to the bid. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, at 2:00 PM local time. All proposals must be submitted electronically via the Bid Center. While a formal evaluation matrix is not provided, the agency has indicated that delivery timelines may be considered in the award decision. The place of performance and delivery is Nashville, Tennessee. The primary procurement contact for this action is Shanna Faulk, Buyer I, located at the Nashville Electric Service Procurement Section.