Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Ballistic Containment and Steel Fabrication

Active

Federal

Response Deadline11/15/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Special Mission Training Center under the Department of Homeland Security involves the fabrication and installation of ballistic wall systems and structural steel framing at Camp Lejeune. The scope of work requires the use of 3/8 inch AR500-class plate to construct the walls and the installation of a three-level training tower reaching approximately 30 feet in elevation, complete with a steel weather cover. To ensure durability in a coastal environment, all components must be treated with corrosion-resistant coatings. The project falls under NAICS code 238120 and is designated for prime contractors managing US Coast Guard training facility projects. The final deliverable is a fully installed ballistic wall system and supporting frame. Interested parties should note the response deadline of November 15, 2026.

General Info

Agency

Department Of Homeland Security → Special Mission Training Center (smtc)

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

Camp Lejeune, NC, 28542, USA

Set-Aside

NONE

Documents

This scope was carved out of 70ZL7126R622000001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPECIAL MISSIONS TRAINING CENTER LIVE-FIRE MARITIME/URBAN TRAINING SYSTEM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 15

Submission deadline

Response Deadline

11/15/2026, 04:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Special Mission Training Center (smtc)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Special Mission Training Center (smtc)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs ballistic wall systems and structural steel framing for prime contractors on US Coast Guard training facility projects. Fabricates walls using 3/8" AR500-class plate and installs a three-level training tower (approx. 30' elevation) with a steel weather cover. Applies corrosion-resistant coatings for coastal environments. Delivers installed ballistic wall system and frame.

Similar Contracts

Same NAICS industry code

Emergency Rail Defect Response and RepairThis subcontract for the Hamilton-Oshawa Port Authority focuses on providing rapid-response site assessment and repair services for emergency rail defects. The selected provider will support prime contractors by ensuring site assessments are conducted within two hours of a report and repair crews, including rail siding flagging, are deployed within four hours. Key operational requirements include the ability to coordinate directly with CN and CP Trainmasters to manage rail traffic and safety. The contractor is responsible for delivering detailed emergency site assessment reports and completing all necessary repairs to maintain rail infrastructure integrity.

Hamilton-Oshawa Port Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Compromise Bar Supply and InstallationThis subcontract involves the supply and installation of compromise bars to facilitate transitions between different rail weights for prime contractors working on Hamilton-Oshawa Port Authority rail maintenance projects. The scope of work specifically focuses on the installation of compromise bars for transitions between 115# and 100# rail. The selected provider must maintain valid WSIB Clearance to perform the work. Interested parties must submit their responses by the deadline of November 18, 2026, for this project categorized under NAICS code 238120.

Hamilton-Oshawa Port Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Rail Tie Installation and DisposalThis subcontract for the Hamilton-Oshawa Port Authority involves the supply and installation of new hardwood ties and associated hardware for rail maintenance projects. The scope of work includes the installation of hardwood THW No.1 ties, CN plates, and spikes, as well as track bed tampering and the hauling and disposal of old materials. The selected provider must deliver fully installed and tamped rail ties while maintaining valid WSIB Clearance and a Certificate of Insurance. Interested parties must submit their responses by the deadline of November 18, 2026.

Hamilton-Oshawa Port Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Thermite Rail Welding ServicesThis subcontract for Thermite Rail Welding Services involves providing specialized welding to repair or join rail sections for prime contractors on Hamilton-Oshawa Port Authority rail maintenance projects. The scope of work requires the use of specialized welding kits, molds, and grinding equipment to deliver completed thermite welds. To qualify, the provider must employ certified rail welders and maintain strict adherence to all safety audits mandated by the Hamilton-Oshawa Port Authority. The solicitation was posted on October 15, 2026, with a response deadline of November 18, 2026, falling under NAICS code 238120.

Hamilton-Oshawa Port Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Marine Painting and PreservationThis subcontract for Marine Painting and Preservation involves providing surface preparation and protective coating services for U.S. Coast Guard vessel projects under the Department of Homeland Security. The scope of work requires 100% preservation of critical areas, including the underwater body, hull plating freeboard, exterior main decks, superstructure, mast, and stern tube interior surfaces, to deliver a fully preserved and coated vessel. The project will be performed in San Francisco under NAICS code 238120. Interested parties must submit their responses by November 4, 2026, for this opportunity managed by the CG-SEA-C21 agency office.

POSTED

about 17 hours ago

DEADLINE

Structural Steel and Equipment SupportThis subcontract opportunity involves providing structural steel and equipment support services for VA Medical Center facility projects in Augusta. The selected contractor will work under prime contractors to perform structural alterations, modify existing structural members, and fabricate and install supports for new heavy infrastructure equipment. The primary deliverables include certified structural supports and modified frames. The project is managed by the Department of Veterans Affairs under the agency Pcac. Interested parties must note that the response deadline is October 30, 2026. The work falls under NAICS code 238120, focusing on structural steel erection and modification to ensure the facility can safely accommodate critical medical infrastructure.

POSTED

about 17 hours ago

DEADLINE

Structural Modifications for ClarifiersThis subcontract opportunity involves performing structural modifications for prime contractors at the City of Palm Springs wastewater treatment plant. The scope of work focuses on modifying existing clarifier walls and supports to accommodate the installation of new aluminum covers, utilizing structural steel or concrete to ensure all supports are structurally sound and meet project specifications. The project is located in Palm Springs, California, under NAICS code 238120. Interested parties must submit their responses by the deadline of November 9, 2026.

City of Palm Springs

POSTED

DEADLINE

Tamperproof Hardware Supply and InstallationThis subcontract involves the supply and installation of tamperproof metal fasteners for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work requires the installation of either 9-gauge steel or 16-gauge die-formed steel fasteners on panels and consoles, utilizing high-strength screw-thread adhesive sealants such as 3M Scotch-Weld or Loctite 243. In addition to the installation of the security hardware, the contractor is responsible for delivering ten complete sets of manual drive tools. The opportunity is categorized under NAICS code 238120, with a response deadline set for November 17, 2026.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Pre-Engineered Metal Building Supply and InstallationThis subcontract agreement involves the supply and installation of a 40 by 50 foot pre-engineered metal building for prime contractors working on Kemper County Board of Supervisors facility projects. The scope of work includes the fabrication and delivery of the building kit, as well as the assembly and erection of the primary and secondary structural steel frames, wall panels, and roof panels, ensuring a final eave height of 14 feet. Managed under the agency MPTAP in Mississippi, the project falls under NAICS code 238120. The solicitation was posted on October 14, 2026, with a response deadline set for October 23, 2026. The final deliverable for this contract is the completed and fully erected building shell.

POSTED

DEADLINE

Woodcroft Substation Fence Replacement

Solicitation # 203666

EPCOR Distribution and Transmission Inc. has issued solicitation number 203666 for the Woodcroft Substation Fence Replacement project in Edmonton, Alberta. The scope of work requires a successful proponent to provide all labor, materials, and equipment to demolish the existing chain link fence and foundations and install a new precast concrete fence. Additionally, the contractor must replace existing chain link gates with no cut, no climb style gates that are compatible with EPCOR’s Abloy PLLW342T paddocks. The project timeline specifies mobilization by December 7, 2026, with construction completion and final certification targeted for January 30, 2027. To be eligible, proponents must attend a mandatory site visit and submit their electronic reply via the EPCOR Bidding System by November 6, 2026. Key deliverables include a master schedule and inspection test plans due one week after the contract award. Proponents must provide a current Workers Compensation Board clearance letter and adhere to strict health, safety, and environment policies, including the use of arc-flash rated clothing and ohm-rated boots. Evaluation is based on mandatory criteria and confidential ratings, with specific requirements for Indigenous relations certifications such as PAIR. The contract may also require a CCDC 221 Performance Bond upon award.

POSTED

DEADLINE

Solicitation # CAP26-0258

Solicitation CAP26-0258 is a stipulated sum construction project for the installation of a new roof deck support structure and roof replacement for Building 55A at the Oklahoma Department of Human Services Human Services Center located at 401 W Commerce, Oklahoma City. The project scope includes structural support installation and roofing work, with bidders providing pricing for a base bid and an alternate for a Thermoplastic Polyolefin (TPO) roofing system versus Modified Bitumen. The estimated cost for the project is 1,250,000.00 dollars, and the performance period is established at 270 calendar days. The contract will be awarded to the lowest responsible and responsive bidder. Bidders must submit a completed bid form, CAP Form A305 Contractor Qualification Statement, and bid security of 5 percent for bids exceeding 100,000 dollars. Awarded contractors are required to provide performance, payment, and defect bonds for 100 percent of the contract value. Technical requirements mandate compliance with the 2018 IBC, IEBC, and 2010 ADA Standards, with specific preservation standards for lumber and daily waste removal. Project administration is managed by a Consultant who oversees quality control, mock-up approvals, and the processing of electronic invoices.

State of Oklahoma, Division of Capital Assets Management, Construction & Properties

POSTED

DEADLINE

Marine Hull Coating & PaintingThis subcontract opportunity, titled Marine Hull Coating and Painting, is issued by the Department of Defense under the W075 Endist San Fran agency. The project involves providing specialized hull cleaning and protective coating services for prime contractors working on USACE marine projects. The scope of work includes scraping and blasting all-welded steel hulls, applying marine-grade anti-fouling paints, and renewing zinc anodes to ensure comprehensive corrosion protection. The final deliverable for this contract is a fully cleaned and painted hull with new zinc anodes installed. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of November 16, 2026. The work falls under NAICS code 238120.

W075 Endist San Fran

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Homeland Security → Special Mission Training Center (smtc)

Same awarding agency

Ballistic Certification and Testing ServicesThis subcontract for Ballistic Certification and Testing Services supports the Department of Homeland Security's Special Mission Training Center. The selected provider will perform independent testing and validation of ballistic containment systems for prime contractors at US Coast Guard training facilities located in Camp Lejeune. The scope of work involves testing installed systems using 6.8 mm XM1188E1 ammunition to validate engagement distances and firing geometry, culminating in the delivery of a formal Ballistic Certification and Validation Package. The opportunity is categorized under NAICS code 541380. Interested parties must adhere to the timeline established by the posting date of October 14, 2026, with a response deadline set for November 15, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

Portable Ballistic Equipment SupplyThis subcontract for Portable Ballistic Equipment Supply involves providing approximately 34 certified portable bullet traps to prime contractors supporting US Coast Guard training facility projects. The equipment must be specifically rated for 6.8 mm XM1188E1 ammunition and delivered directly to the project site located at Camp Lejeune. Managed under the Department of Homeland Security for the Special Mission Training Center, the opportunity is categorized under NAICS code 332999. The solicitation was posted on October 14, 2026, with a response deadline set for November 15, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

Electrical, Lighting, and Life-Safety SystemsThis subcontract involves the installation of electrical distribution, lighting, ventilation, and fire detection systems for US Coast Guard training facility projects at Camp Lejeune. Working under prime contractors for the Department of Homeland Security's Special Mission Training Center, the selected provider will implement facility lighting, electrical wiring, air exchange systems, and fire/life-safety alarms. Due to the coastal location, all installations must utilize corrosion-resistant materials to ensure the longevity and reliability of the operational systems. The project falls under NAICS code 238210 and was posted on October 14, 2026, with a response deadline of November 15, 2026. The primary objective is the delivery of fully operational electrical and life-safety infrastructure tailored to the specific environmental demands of the performance site.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Specialized Maritime and Urban Training FeaturesThis subcontract opportunity with the Special Mission Training Center under the Department of Homeland Security involves the fabrication and installation of modular training elements designed to simulate ship and urban environments. The scope of work focuses on creating fully outfitted interior training spaces for US Coast Guard facilities, including the installation of specialized maritime components such as ship-style doors, hatches, knee-knocker thresholds, ship ladders, and marine-grade grated decks. Additionally, the contractor will be responsible for constructing reconfigurable rooms and confined passageways. The project will be performed at Camp Lejeune, North Carolina, under NAICS code 238990. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline set for November 15, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Ballistic Rubber and Ricochet Mitigation SupplyThis subcontract involves the supply and installation of sacrificial ballistic rubber and ricochet-mitigation surfacing for US Coast Guard training facility projects. The scope of work requires the installation of 12-inch sacrificial ballistic rubber blocks on walls and 2-inch ballistic rubber surfacing on floors to provide necessary lining and protection. The project is managed by the Special Mission Training Center under the Department of Homeland Security and will be performed at Camp Lejeune. Interested parties must respond by November 15, 2026, regarding this opportunity categorized under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

in about 1 month

Site Preparation and Foundation WorkThis subcontract for Site Preparation and Foundation Work supports the Department of Homeland Security's Special Mission Training Center. The project involves comprehensive earthwork and infrastructure development at Camp Lejeune, specifically focusing on site clearing, grading, and excavation. The scope includes the installation of drainage systems and the pouring of concrete slabs and foundations for a building footprint measuring up to 140 by 70 feet. The primary objective is to deliver a completed building pad and fully functional site drainage for prime contractors. This effort falls under NAICS code 238110. Interested parties should note the response deadline of November 15, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

in about 1 month

Design and Engineering ServicesThis subcontract for Design and Engineering Services supports the Department of Homeland Security's Special Mission Training Center through the provision of comprehensive architectural, structural, civil, and ballistic engineering. The scope of work involves collaborating with prime contractors on US Coast Guard training facility projects to develop Design Basis Reports and detailed drawings covering site/civil, architectural, structural, ballistic, mechanical, electrical, and fire/life-safety requirements. The selected provider is responsible for delivering structural and anchorage calculations along with sealed approved-for-construction drawings signed by licensed design professionals. Performance for this contract will take place at Camp Lejeune, with a response deadline set for November 15, 2026.

Engineering Services

POSTED

DEADLINE

in about 1 month

SPECIAL MISSIONS TRAINING CENTER LIVE-FIRE MARITIME/URBAN TRAINING SYSTEM

Solicitation # 70ZL7126R622000001

The U.S. Coast Guard is conducting market research via a Request for Information to identify capable sources for the design, engineering, fabrication, delivery, installation, and commissioning of a Joint Maritime Training Facility live-fire maritime/urban training system. Located at the Special Missions Training Center within Marine Corps Base Camp Lejeune, North Carolina, the facility will support multi-level tactical training for maritime interdiction, close-quarters combat, breaching, and vertical access. The system must be suitable for a coastal environment and feature a ballistic containment system rated for 6.8 mm XM1188E1 ammunition, supplemented by sacrificial ballistic rubber blocks or a bullet-trap system. The anticipated scope of work includes the delivery of a complete operational facility featuring three occupied training levels, a tower deck, and reconfigurable urban and maritime environments with ship-style hatches and grated decks. The contractor will be responsible for all project management, structural and civil engineering, and the installation of essential utilities, including fire/life-safety and ventilation systems. The period of performance is expected not to exceed 300 calendar days from the date of award. While this is currently an RFI and not a formal solicitation, the government is seeking technical concepts, past performance summaries, and non-binding rough order of magnitude cost estimates to refine its acquisition strategy.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS