Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-2078Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 127 feet of hot rolled, annealed, round steel bar with a diameter of 0.875 inches and a nominal length of 10 to 12 feet in whole-foot increments, weighing approximately 2.460 pounds per foot. The material must meet the composition and properties of Steel Composition 321 and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including SAE AMS-QQ-S-763D, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance with mill certification is mandatory for every shipment and must be submitted to both the delivery point and the DLA Troop Support Contracting Officer. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer’s heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels for smaller bars, with strict prohibitions against marking fluids that could contaminate the product. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support requirements, and any deviation from this requirement constitutes an exception that must be explicitly declared; failure to comply may result in criminal penalties. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all markings must remain waterproof and stable under normal handling. The material is to be delivered FOB origin to Tinker AFB, Oklahoma, with a required delivery date of February 1, 2027, and a 10% variance allowed in quantity. Inspection and acceptance occur at the destination, and while certain quality conformance inspections are waived under QSL program compliance, all other documentation and identification standards remain strictly enforced. The contract is issued under solicitation SPE8E4-26-T-2078, with a purchase request number and unit price specified, and governed by DoD procurement protocols and unit of measure standards.

General Info

127 feet of 0.875-inch diameter 321 steel bar, FOB origin, deliver to Tinker AFB by Feb 1, 2027, with full compliance and certification.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-2078 for DLA Troop Support Metals

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUS
Contacts
Pamela Duffey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR, METAL
STEEL COMP 321
HOT ROLLED, ANNEALED, ROUND
0.875 IN DIA
10 TO 12 FT LG
2.460 LB/FT (REF)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
SPE8E4-26-T-2078
SECTION B
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-S-763D REVISION NR D DTD 03/01/2015 PART PIECE NUMBER: 321,ROUND, HR ANNLD DSCLD O/A
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025
SPE8E4-26-T-2078
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM A700-14 (R 2019) REVISION NR DTD 11/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS2806 REVISION NR D DTD 12/20/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757045 0001 FT 127.000
NSN/MATERIAL:9510002886276
DELIVERY (IN DAYS):0163
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE8E4-26-T-2078
SECTION B
PR: 7017757045 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/01/2027 Original Required Delivery Date:01/13/2027
SPE8E4-26-T-2078 NSN/Part Number: 9510-00-288-6276 Quantity: 127 FT Purchase Request: 7017757045QTY: 127 Delivery: 163 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
Precision Metal Casting for Shaft CouplingsThe contract entails the manufacture of flexible shaft couplings using metal casting techniques, requiring specialized tooling and strict adherence to QPL/QML quality standards as specified under procurement note H02. The work must meet precise engineering and material requirements to ensure components are suitable for high-performance applications in defense-related vehicle systems, with all production activities governed by rigorous quality control protocols. Performance is required at Tracy, California, with a zip code of 95304-5000, and the solicitation falls under NAICS code 332111 for foundries. The opportunity is classified as a subcontract under the Department of Defense, specifically managed by LAND SUPPLIER OPNS VEHICLE SPT. The posting date is August 10, 2026, and responses must be submitted by August 20, 2026, leaving a ten-day window for proposal submission. All interested parties must ensure full compliance with the specified technical and regulatory requirements to be considered for award.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting of COVER, STARTER (NSN: 5340-01-481-6024)
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
Metal Casting and Machining of Door HandlesThe contract requires the manufacturing of 249 precision metal-cast door handles identified by NSN 5340-01-147-7689, with all stages including casting, machining, finishing, and inspection performed to meet military standards. The work must comply with specified technical and quality requirements to ensure full functionality and durability under operational conditions. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, and the North American Industry Classification System code 332111 applies, indicating this is a die and die casting business under the broader category of forging and stamping. Performance of the contract is designated to take place in Tracy, California, with a ZIP code of 95304-5000. The opportunity was posted on August 9, 2026, and responses are due by August 20, 2026. This is a subcontract opportunity published through the DLA Web portal, and while the specific point of contact is not listed, interested parties are directed to the provided UI link for additional details and submission instructions. The contracting activity falls under the Department of Defense, managed through the Land Supply Chain, and emphasizes procurement from a qualified small business set-aside category to support veteran-owned enterprises.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting or Forging
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
Metal Stamping and Forging for Ball Joint HousingsThe contract is for the supply of forged or stamped metal components specifically designed for ball joint housings used in defense vehicle systems, requiring high-strength materials and tight precision tolerances to meet rigorous military performance standards. The work must comply with technical specifications ensuring durability, reliability, and compatibility with combat vehicle applications under extreme operational conditions. Subcontractors are expected to demonstrate capability in advanced metal forming processes, quality control protocols, and adherence to defense-industry manufacturing requirements. The solicitation, issued under NAICS code 332111 for forgings and stamped metal products, was posted on August 9, 2026, with responses due by August 24, 2026. It is categorized as a subcontract under the Department of Defense’s LSO Combat Vehicles and Armament office, with performance likely tied to defense manufacturing facilities across the United States. Bidders must be prepared to meet stringent delivery schedules and quality assurances without specified set-aside provisions, indicating open competition among qualified suppliers capable of supporting critical defense infrastructure.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332111
New
DIBBS
Precision Steel Bar Manufacturing – Grade 410 Stainless Steel, Cold-Finished Hexagonal BarsThe contract calls for the manufacture of 10,000 feet of cold-finished hexagonal bars made from Grade 410 stainless steel, with each bar measuring 1.000 inch across flats and ranging in length between 10 and 12 feet. The material must comply with stringent military and aerospace standards, ensuring high dimensional precision, consistent mechanical properties, and surface finish suitable for critical applications. Production must adhere to approved specifications for material composition, heat treatment, and finishing processes to meet the demanding performance requirements of defense and aviation systems. Deliverables are to be performed at a place of performance located in Phoenix, Arizona, with the Defense Logistics Agency as the overseeing organization under the Department of Defense. The solicitation is structured as a subcontract and falls under NAICS code 332111, indicating a focus on forged and stamped metal product manufacturing. Responses are due by August 20, 2026, following a posting date of August 9, 2026, giving potential contractors approximately eleven days to submit qualified proposals. All work must align with the technical and compliance expectations set by federal procurement standards, and failure to meet material specifications could result in rejection of delivery or contract termination.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Forged Disk Assembly ManufacturingThe contract requires the manufacture of 58 precision disk assemblies through forging and critical welding processes, strictly following technical drawing 12479550. Each assembly must undergo rigorous dimensional verification and technical inspection to ensure compliance with specified tolerances and performance standards. The finished products must be packaged in accordance with MIL-STD requirements to guarantee protection during transit and storage. This is a subcontract under a Women-Owned Small Business Set-Aside, categorized under NAICS code 332111, and is being managed by the Department of Defense through LAND SUPPLY CHAIN. The place of performance is designated as New Cumberland, PA, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Metal Casting Manufacturing for Aerospace Landing Gear RetainerThe contract requires precision metal casting of a single aerospace component, the landing gear retainer, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, to meet stringent defense specifications. The scope encompasses all phases of production including tooling development, casting, quality control, packaging, and labeling, ensuring full compliance with applicable military and aerospace standards. The work must be performed to exacting tolerances and verified through approved inspection protocols to guarantee operational reliability in high-stress environments. The solicitation is classified as a subcontract under NAICS code 332111, issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Responses are due by August 17, 2026, with the opportunity posted on August 9, 2026. While no set-aside designation is specified, the contract is tied to a specific military part and must be fulfilled in accordance with defense procurement regulations. All deliverables must be properly documented and traceable, with final product packaging and labeling adhering to required labeling schemes for military logistics systems. The place of performance and point of contact details are not provided, but performance is expected to align with Defense Logistics Agency procurement protocols accessible via the referenced DIBBS link.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
Metal Casting Manufacturing of Rail Assembly
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting and Machining of Valve BodyThe contract calls for the manufacture of a precision-cast 3-inch valve body using ASTM A494 nickel-copper alloy, requiring strict adherence to dimensional tolerances and final machining to meet flanged end connection specifications. The work involves both casting and precision machining processes to ensure the component meets exacting performance criteria for mechanical integrity and sealing surfaces, suitable for demanding applications in industrial or defense environments. The material selection emphasizes corrosion resistance and structural reliability under operational stress. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the NAICS code 332111 for metal casting establishments. The opportunity was posted on August 9, 2026, with a bid submission deadline of August 20, 2026. Performance is to take place in Bremerton, Washington, under the auspices of the Department of Defense, specifically through the Puget Sound office. The solicitation is structured as a subcontract and is accessible via the DIBBS platform under reference number SPE7MC26T187Z, with no public point of contact designated in the available data.
PUGET SOUND

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Forging or Casting of Rod End ComponentThe contract calls for the manufacture of a clevis rod end using either precision forging or casting methods, strictly adhering to military specifications. This includes careful selection of approved materials, proper heat treatment processes to ensure mechanical integrity, and comprehensive initial quality inspections to verify compliance with performance and safety standards. The component must meet rigorous defense-grade requirements for durability, dimensional accuracy, and reliability under extreme operational conditions. The work is to be performed at a designated location in Mechanicsburg with a ZIP code of 17050-2411, under a subcontract issued by the Department of Defense through its Land Supplier Operations Vehicle Support division. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, and is classified under NAICS code 332111, indicating it pertains to forging and stamping operations. Interested parties must submit proposals by the deadline to be considered for award, and all manufacturing activities must align with the technical and compliance expectations set forth by the military.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332111
New
DIBBS
Precision Metal Casting and Machining of Copper-Nickel FittingsThe contract involves the manufacture of 63 precision copper-nickel pipe elbows composed of a 70-30 copper-nickel alloy, each featuring a 45-degree flow angle and a 2-inch nominal pipe size with socket-weld ends. The work encompasses the full manufacturing process including casting, precision machining to meet military specifications, and final finishing to ensure dimensional accuracy and surface integrity. All components must conform to stringent quality standards required for high-performance fluid handling systems in defense applications, with production centered around the specified place of performance in New Cumberland, Pennsylvania, under a 17070-5002 zip code. The offering is structured as a subcontract under NAICS code 332111, reflecting its classification within the forged and stamped metal product manufacturing sector, and is issued by the Fluid Handling Division of the Department of Defense. Proposals must be submitted by the deadline of August 20, 2026, with the solicitation posted on August 9, 2026, providing a 11-day window for qualified manufacturers to respond. The requirement is part of a broader defense supply initiative intended to secure critical components for mission-critical fluid systems, necessitating adherence to exacting engineering criteria and traceable manufacturing processes. While no set-aside type is specified, interested parties must be prepared to demonstrate capability in producing military-grade metal components, with the contract award expected to support ongoing operations within the Department of Defense's infrastructure. Access to full solicitation details is available through the official DIBBS portal using the provided link.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 531020
New
DIBBS
Packaging, Marking, and Logistics SupportThe contract requires comprehensive military-compliant packaging, preservation, labeling, and shipping of steel bars in accordance with ASTM D3951, MIL-STD-129, and DLA RP001 standards, ensuring all materials meet rigorous defense logistics specifications. The work includes proper marking, protective treatment to prevent corrosion and damage during transit, and accurate documentation aligned with defense supply chain protocols. Invoicing must be processed through the Wide Area WorkFlow system, and the contractor must provide full support for destination inspections to confirm compliance and readiness upon arrival. Performance is designated for Tinker Air Force Base, Oklahoma, with a submission deadline of August 21, 2026, and the solicitation was posted on August 10, 2026. This is a subcontract under NAICS code 531020 for other heavy duty trucking and logistics operations, managed by the Department of Defense through Depot Oklahoma. The successful offeror will be responsible for end-to-end logistics execution, from initial packaging through final inspection, with no room for deviation from specified military and federal documentation and handling requirements.

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
Hot-Rolled Steel Bar SupplyThe contract calls for the supply of hot-rolled, annealed, round steel bars with a diameter of 0.875 inches and lengths between 10 and 12 feet, adhering strictly to the ASTM A700-14 and SAE AMS-QQ-S-763D technical specifications. These bars are intended for use in defense-related applications and must meet rigorous quality and material standards to ensure performance and reliability under operational conditions. The solicitation is issued as a subcontract under the NAICS code 331110, which categorizes it within the steel mill and steel product manufacturing sector, indicating that the supplier must possess the capability to produce forged or rolled steel products to precise industrial specifications. The opportunity was posted on August 10, 2026, with a response deadline of August 21, 2026, giving potential vendors a limited window to submit proposals. The place of performance is designated as Tinker Air Force Base with a zip code of 73145-8000, and the contracting entity is the Department of Defense through its agency name Depot Oklahoma. The procurement is managed through the DILS system via the provided link, and while no set-aside designation or point of contact details are specified, all bids are expected to comply with federal contracting requirements and delivery timelines relevant to military logistics and maintenance operations.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Documentation and Certification ReportingThe contract requires the preparation and submission of comprehensive mill material certification and quality compliance reports under the CDRL-METALSCERT-26124 specification, ensuring full heat and lot traceability along with verified conformance data for all metallic components. This effort is critical to meeting stringent Department of Defense quality standards and must be executed with precision to support procurement and inspection processes at Tinker Air Force Base, Oklahoma, where the work is to be performed. Submission deadlines are strict, with responses due by August 21, 2026, and the solicitation was posted on August 10, 2026, indicating a tight turnaround for qualified subcontractors. The contract is classified as a subcontract under NAICS code 541380, which relates to other scientific and technical consulting services, and is managed by the Department of Defense through the Depot Oklahoma office. Although specific point of contact details are not provided, interested parties must access the official DIBBS portal via the provided link to obtain complete solicitation terms, technical requirements, and submission protocols. The obligation centers on delivering documentation that is fully auditable and compliant with federal supply chain integrity standards, emphasizing traceability and material assurance without deviation.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332439
New
DIBBS
Preservation, Packaging, and Hazardous Materials ComplianceThe contract requires the preservation and packaging of aluminum plates in strict compliance with MIL-STD-2073-1E and ASTM B660 Level A standards, including the use of preservation code ZZ to ensure long-term protection against corrosion and environmental damage. All packaging must include proper palletization according to RP001 specifications, ensuring stability and safe handling during transport. Additionally, the work must fully adhere to hazardous material labeling requirements to meet federal transportation and storage regulations. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and the contract falls under NAICS code 332439 for other fabricated metal product manufacturing. This is a subcontract opportunity under the Department of Defense, with a response deadline of August 21, 2026.
Other Metal Container Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332813
New
DIBBS
Precision Material Marking and IdentificationThe contract requires precision permanent marking of aluminum plates in compliance with MIL-STD-129 and ASTM B666 standards, ensuring durable, legible identification for military use. Markings must include the contract number, National Stock Number, aluminum alloy specification, heat and lot numbers, and dimensional data, applied through stamping or stenciling methods to meet rigorous durability and clarity requirements. The work is to be performed at Tinker Air Force Base with a zip code of 73145-8000, and the solicitation is classified as a subcontract under NAICS code 332813, indicating a focus on metal stamping and related manufacturing processes. The opportunity was posted on August 10, 2026, and proposals must be submitted by August 21, 2026, with no set-aside type specified. The contracting agency is the Department of Defense through Depot Oklahoma, and all submissions must adhere strictly to the referenced military and material standards to ensure compatibility with defense logistics and inventory systems. While no point of contact is provided, the official solicitation can be accessed through the DIBBS website using the provided link.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Plate Fabrication and SupplyFour units of aluminum alloy 6061-T651 plate meeting SAE AMS4027P specifications are to be supplied, with full fabrication, preservation, packaging, and delivery services included. The entire contract must be completed and delivered within 135 days from award, with delivery terms set at FOB origin. The solicitation is issued as a subcontract under the NAICS code 331491, managed by the Department of Defense through DEPOT OKLAHOMA, with performance required at TINKER AFB, ZIP 73145-8000. The response deadline is August 21, 2026, with the solicitation posted on August 10, 2026, and all work must comply with military-grade documentation and quality standards expected for defense supply chain obligations.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 999999
New
DIBBS
Unknown/Undetermined Subcontract OpportunityAn unknown or undetermined subcontract opportunity has been posted by the Department of Defense through the DEPOT OKLAHOMA office, with a place of performance located at TINKER AFB, Oklahoma, 73145-8000. The solicitation was made public on August 10, 2026, and responses are due by August 21, 2026, though no statement of work, technical specifications, or details regarding deliverables or required services have been provided. The NAICS code 999999 indicates that the nature of the work is unclassified or unspecified, and no set-aside type or organization type has been designated. There is no point of contact listed, and the contract is intended as a subcontract under a broader Department of Defense procurement initiative. Interested parties must rely on the provided DIBBS link for any potential additional information, though no scope or requirements are currently available.

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-2075
This contract pertains to the procurement of aluminum alloy plate measuring 2.00 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 677.28 pounds per piece, designated as NSN 9535-00-855-6924 and complying with SAE AMS4027P Revision P, ASTM B666/B666M-20, and ASTM B660-23 standards. The material must be Alloy 6061 in T651 temper and supplied in whole-foot lengths only, with no test coupons permitted. Strict dimensional adherence and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement must be explicitly declared. Non-compliant bids are subject to rejection and potential criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany each shipment and be forwarded to the contracting officer. Packaging must conform to MIL-STD-2073-1E and ASTM B660 Level A requirements with special preservation code ZZ and marking code Z, aligned with MIL-STD-129R. The contract requires delivery of four pieces FOB origin within 135 days, with zero tolerance for quantity variance, inspection and acceptance at destination, and adherence to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements. Failure to meet any specification may result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2077
This contract specifies the procurement of forged steel bars made from 4340 alloy, with a diameter of 3.250 inches and lengths ranging between 12 and 16 feet, sold in whole-foot increments. The material must meet exacting technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, including compliance with ASTM A29/A29M-20 and SAE AMS2806, and must be accompanied by a Certificate of Quality Compliance for every shipment, which must also be forwarded to the designated DLA Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling using waterproof, non-contaminating fluids that remain legible under normal handling. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and all markings must conform to MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700 for preservation and marking. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement must be explicitly declared; failure to comply may constitute an unauthorized substitution with potential criminal penalties. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with palletization and preservation per ASTM A700 and special code ZZ. The contract calls for 91 feet of material delivered FOB origin to Tinker AFB, Oklahoma, with a delivery window of 163 days and a allowable quantity variance of plus or minus 10 percent. Inspection and acceptance occur at destination, and CDRL-METALSCERT is required for metal certification. The DLA Troop Support Contracting Office is the point of contact for all quality and documentation compliance, and the supplier must ensure all documentation aligns with the Technical Data Package referenced in the solicitation SPE8E4-26-T-2077 issued on August 10, 2026.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting & Representation SupportThe contract titled Small Business Subcontracting & Representation Support is issued by the Department of Defense through DEPOT OKLAHOMA for services related to post-award small business representation at TINKER AFB with a zip code of 73145-8000. It focuses on ensuring compliance with small business regulations by providing support for size status updates, socioeconomic disclosures, and re-representations prior to option periods, which are critical for maintaining eligibility and adherence to federal subcontracting requirements. The work falls under NAICS code 541611, indicating a scope tied to management consulting services, likely involving administrative and compliance guidance for subcontractors. This is a subcontract action with no set-aside designation, open for responses between August 9 and August 20, 2026. The contract does not specify a point of contact or detailed organization type, and no solicitation number is provided. Bidders must ensure they have the capability to manage dynamic representation obligations tied to small business status changes and can deliver timely, accurate documentation to sustain compliance throughout the contract’s lifecycle, particularly around option period elections. The work is performance-based and centered on sustaining regulatory integrity in subcontracting relationships under a Department of Defense prime contract.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST Special Publication 800-171 controls to protect covered defense information and ensure compliance with DFARS 252.204-7012, mandating robust cybersecurity measures for safeguarding controlled unclassified information. This includes establishing and maintaining security controls across systems handling such data, as well as defining clear procedures for detecting, reporting, and responding to cyber incidents in accordance with federal requirements. The effort is scoped as a subcontract under the Department of Defense, with performance expected at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, under NAICS code 541512, which pertains to computer systems design services. The work supports the broader DoD objective of securing sensitive information across the defense industrial base and requires full alignment with NIST 800-171 standards, covering areas such as access control, audit, configuration management, and incident response. Failure to implement and maintain these controls could result in noncompliance penalties and jeopardize contract execution.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract pertains to pre-award preparation and submission of hazard labels for materials that fall outside the scope of federal regulatory requirements, with the primary goal of ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS Appendix F. This work involves developing accurate, legally compliant labeling for hazardous substances used in defense-related operations, particularly at Tinker Air Force Base, where the performance location is specified. The effort requires precise alignment with safety and regulatory standards to support safe handling, storage, and transportation of materials within Department of Defense environments. This subcontract, solicited under NAICS code 541690, targets specialized compliance services and is open for response until August 20, 2026, with the posting date listed as August 9, 2026. The contracting entity is the Department of Defense through its organization Depot Oklahoma, and the work is critical to maintaining operational safety and regulatory adherence for unregulated materials. All submissions must meet the rigorous documentation and labeling criteria defined by OSHA and DFARS, and successful performance will directly support the integrity and safety of defense logistics systems at the specified location.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details