Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Steel Bar Manufacturing – Grade 410 Stainless Steel, Cold-Finished Hexagonal Bars

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of 10,000 feet of cold-finished hexagonal bars made from Grade 410 stainless steel, with each bar measuring 1.000 inch across flats and ranging in length between 10 and 12 feet. The material must comply with stringent military and aerospace standards, ensuring high dimensional precision, consistent mechanical properties, and surface finish suitable for critical applications. Production must adhere to approved specifications for material composition, heat treatment, and finishing processes to meet the demanding performance requirements of defense and aviation systems. Deliverables are to be performed at a place of performance located in Phoenix, Arizona, with the Defense Logistics Agency as the overseeing organization under the Department of Defense. The solicitation is structured as a subcontract and falls under NAICS code 332111, indicating a focus on forged and stamped metal product manufacturing. Responses are due by August 20, 2026, following a posting date of August 9, 2026, giving potential contractors approximately eleven days to submit qualified proposals. All work must align with the technical and compliance expectations set by federal procurement standards, and failure to meet material specifications could result in rejection of delivery or contract termination.

General Info

Manufacture 10,000 feet of 1.000-inch hex bars from Grade 410 stainless steel to military aerospace standards in Phoenix, AZ.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

PHOENIX, AZ, 85034-7263, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 10,000 feet of cold-finished hexagonal bars from Grade 410 stainless steel, 1.000 inch across flats, 10–12 feet long, compliant with military and aerospace material standards.

Similar Contracts

Same NAICS industry code

Precision Metal Casting and Machining of Valve BodyThe contract calls for the manufacture of a precision-cast 3-inch valve body using ASTM A494 nickel-copper alloy, requiring strict adherence to dimensional tolerances and final machining to meet flanged end connection specifications. The work involves both casting and precision machining processes to ensure the component meets exacting performance criteria for mechanical integrity and sealing surfaces, suitable for demanding applications in industrial or defense environments. The material selection emphasizes corrosion resistance and structural reliability under operational stress. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the NAICS code 332111 for metal casting establishments. The opportunity was posted on August 9, 2026, with a bid submission deadline of August 20, 2026. Performance is to take place in Bremerton, Washington, under the auspices of the Department of Defense, specifically through the Puget Sound office. The solicitation is structured as a subcontract and is accessible via the DIBBS platform under reference number SPE7MC26T187Z, with no public point of contact designated in the available data.

POSTED

about 3 hours ago

DEADLINE

GUIDE, CAM FOLLOWER, FO

Solicitation # SPE7L1-26-T-946Y

The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.

LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2062

The contract specifies the procurement of 109 feet of hot rolled, annealed 440C stainless steel bar with a diameter of 0.750 inches and a length requirement of exactly 10, 11, or 12 feet in whole increments, with a reference weight of 1.500 pounds per foot. All material must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and comply with applicable specifications including SAE AMS-QQ-S-763D, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that do not contaminate or impair performance, and markings must be waterproof and durable. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, while tags are acceptable for wire. A Certificate of Quality Compliance, commonly known as a mill-certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Supply is restricted to manufacturers and distributors listed on the Qualified Suppliers List for Distributors (QSLD), and any bid based on non-QSLD-sourced material constitutes an exception and must be explicitly declared. Failure to comply with QSLD eligibility may result in criminal penalties in addition to civil remedies. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with special packaging codes Z and ZZ aligned to ASTM A700. Marking and packaging must adhere strictly to MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels on structural shapes and secured lifts. Delivery is FOB origin, with inspection and acceptance occurring at destination within 164 days, and a 10% variance in quantity is permitted. The shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the solicitation is governed under the federal procurement code SPE8E4-26-T-2062 with a NAICS code of 332111.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2055

The contract specifies the procurement of 62 linear feet of hot-rolled, annealed square steel bar composed of SAE 4130 alloy, measuring 0.750 inches across the flats and weighing 1.913 pounds per foot, with all bars required to be exactly 12 feet in length in whole-foot increments. Strict material certification is mandated, requiring a Certificate of Quality Compliance with each shipment, to be provided both to the receiving depot and forwarded to the DLA Troop Support Contracting Officer. The steel must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and compliance with MIL-STD-2073-1E packaging and MIL-STD-129 marking is required, including unique identification markings on each unit that include the contract delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions. Marking must be legible, waterproof, and non-contaminating, permitted via stenciling or approved adhesive labels for small-diameter items, with no die stamping allowed. Packaging must conform to DLA requirements including special codes Z and ZZ per ASTM A700, and palletization must adhere to RP001 guidelines. The supplier must be on the Qualified Suppliers List for Distributors (QSLD), and any non-compliant offer must be explicitly flagged as an exception; products from unapproved distributors will be rejected and may incur criminal penalties. Delivery is FOB origin with a 164-day delivery window, final delivery to Tracy, CA, with an acceptance point at destination and ±10% quantity variance permitted. The NSN is 9510-00-808-9593 and pricing is $62.00 per foot for a total of $3,844.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2045

The contract specifies the procurement of wrought steel bars composed of Steel Comp 630, with a diameter of 0.375 inches and lengths ranging between 10 and 20 feet in whole-foot increments, weighing approximately 0.380 pounds per foot. These bars must be centerless ground and fully compliant with SAE AMS5643W Revision NR W dated December 1, 2021, and other referenced standards including MIL-STD-129R, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance, also known as a mill-material certification, is mandatory for every shipment and must be provided to both the customer and the DLA Troop Support Contracting Officer. All units must be clearly and permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer details including heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied using approved methods such as stamping or stenciling, with adhesive labels required for bars under 0.250 inches in nominal diameter. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and palletization must follow RP001 guidelines. The material is classified as a critical application item, requiring strict adherence to quality and traceability protocols. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared and will be treated as an exception. If the supplier is an approved QSLD member, government inspections are waived and oversight relies on the Certificate of Quality Compliance and other documented conformance. The contract allows for a 10% variance in quantity, with delivery scheduled for 164 days after award, FOB origin, and inspection and acceptance to occur at destination. The total quantity ordered is 1,193 feet, with a unit price based on the line item referenced as PR 7017758636, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract, issued under solicitation SPE8E4-26-T-2045, incorporates extensive technical, quality, and packaging controls governed by DLA’s Master List of Technical and Quality Requirements and mandates

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2056

The contract specifies the procurement of steel bar metal, specifically hot rolled, square, spheredized steel with a width of 1.00 inch across flats and lengths ranging from 6 to 14 feet in whole-foot increments only. The material must meet a reference weight of 3.40 pounds per foot and comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, incorporating specifications such as ASTM A686-16 and SAE AMS2806. The product must be supplied with a Certificate of Quality Compliance for every shipment, and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Marking methods are restricted to stamping (excluding die stamp) or stenciling with waterproof, non-contaminating fluid; adhesive labels are required for small-diameter bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking conforming to MIL-STD-129, including special codes Z and ZZ as defined in ASTM A700. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and deviations require explicit disclosure. The contract includes a 10% quantity variance, delivery FOB origin, and destination inspection and acceptance point, with a required delivery date of 164 days from award. Special packaging and preservation standards apply, and the product must be shipped to the DLA Distribution San Joaquin facility in Tracy, California. All documentation, including CDRL-METALSCERT and DD Form 1423s, must be provided as required, and failure to meet any specification constitutes grounds for rejection.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2050

The contract specifies the procurement of cold-finished steel bars composed of either 1018 or 1020 alloy, with a thickness of 0.375 inches, a width of 12.00 inches, and a length between 10 and 12 feet in whole-foot increments only, weighing approximately 15.30 pounds per foot. All material must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including compliance with ASTM A108, ASTM A29/A29M-20, ASTM A700-14, SAE AMS2806, and MIL-STD-129R for marking and packaging. Each bar must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are durable, waterproof, and non-contaminating. Adhesive labels are required in lieu of line markings, and all packaging must conform to MIL-STD-2073-1E, with preservation methods as defined by ASTM A700 and markings aligned with MIL-STD-129, including the special marking code ZZ. The material must be shipped in whole-foot lengths, and each shipment must include a Certificate of Quality Compliance, which must be forwarded to the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award under this solicitation; any non-compliance constitutes an unauthorized substitution with potential criminal penalties. Although source inspection is waived for qualified suppliers, quality assurance requirements such as CDRL-METALSCERT are mandatory, and material certifications must accompany every shipment. The delivery requirement stipulates 67 linear feet to be delivered FOB origin within 164 days of contract award, with a 10% quantity variance allowed. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, with preservation, packaging, and marking instructions strictly tied to federal standards. The solicitation number is SPE8E4-26-T-2050, with a response deadline of August 20, 2026, and a required ship date of February 1, 2027. All documentation must align with the referenced Technical Data Package revisions and applicable DLA procurement notes, particularly

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2044

The contract specifies the procurement of 68 feet of 4340 steel bar in hot finish, round, annealed condition with a 3.000 inch diameter and lengths strictly between 10 and 12 feet in whole-foot increments. The material must meet the SAE AMS6415 Rev V and SAE AMS2806 Rev D specifications and requires a Certificate of Quality Compliance with every shipment, which must be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or labeling, with markings that are waterproof, legible, and non-contaminating. Adhesive labels are mandatory for bars under 0.250 inch in nominal diameter, and tags are acceptable for wire. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special preservation code ZZ per ASTM A700 and special marking code ZZ for additional requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and deviations must be explicitly declared; non-compliance could result in rejection or criminal penalties. The material is to be delivered FOB origin to DLA Distribution Cherry Point, North Carolina, no later than 164 days from order, with a required delivery date of January 5, 2027. Inspection and acceptance occur at destination, and quantity variance is permitted between minus 10% and plus 10%. All documentation, including CDRL-METALSCERT and related technical data, must be submitted per DLA requirements, and failure to meet any marking, certification, or supplier eligibility criteria constitutes cause for rejection.

CHERRY POINT PHANTOM RD BLDG

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2048

The contract specifies the procurement of 63 linear feet of cold drawn, flat, annealed steel bar composed of Alloy 4130, with a thickness of 1.000 inch and a width of 4.000 inches, supplied in whole-foot lengths of 10, 11, or 12 feet, weighing 13.60 pounds per foot. All material must comply with SAE AMS-S-6758B and SAE AMS2806 standards and be accompanied by a Certificate of Quality Compliance with each shipment, sent both with the product and directly to the DLA Troop Support Contracting Officer. Continuous marking is mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions. Markings must be applied via stenciling or stamping (excluding die stamping), be legible, waterproof, and non-contaminating, and adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must follow ASTM D3951 with precedence given to DLA Master List requirements and must be labeled and palletized per MIL-STD-129 and RP001. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and deviations or use of non-QSLD sources are considered unauthorized substitutions with potential criminal penalties. Inspection and acceptance occur at destination, with a 10% quantity variance permitted. Delivery is FOB origin, due in 164 days, and must be sent to the DLA Distribution Red River facility in Texarkana, TX, with compliance to DLA procurement notes and technical data package provisions.

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2057

The contract specifies the procurement of 110 linear feet of steel bar material compliant with specifications 1018/1020, flat condition, 0.250 inch thickness, 4.000 inch width, and delivered in whole foot lengths between 8 and 12 feet, with a referenced weight of 3.400 pounds per foot. The material must meet technical and quality standards outlined in ASTM A108, ASTM A29/A29M-20, ASTM A700-14, SAE AMS2806, and MIL-STD-129R, with full compliance required under the DLA Master List of Technical and Quality Requirements. A Certificate of Quality Compliance, including mill-material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s heat and lot number, dimensions, and other identifying codes using approved methods such as stenciling or stamping; adhesive labels are required for bars under 0.250 inch nominal OD. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods per ASTM A700 and marking in accordance with MIL-STD-129, including special codes Z and ZZ. Delivery is FOB origin to the Red River DLA distribution center in Texarkana, Texas, with a required delivery date of December 9, 2026, and a maximum allowable variance of plus or minus 10 percent. Inspection and acceptance occur at destination, and the quantity is fixed at 110 feet with a purchase request number and CLIN structure for payment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, with non-compliant offers treated as exceptions and subject to potential criminal penalties if unauthorized substitutions occur. Source inspection requirements are waived for qualified suppliers under the QSL program, and all data must align with the DLA Technical Data Package Revision A, issued under solicitation SPE8E4-26-T-2057.

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2043

Steel bar, metal, composed of composition 6150, annealed, round, with a diameter of precisely 1.000 inch and a length range of 12 to 16 feet, delivered in whole-foot increments only, weighing 2.670 pounds per foot, must meet stringent quality and identification standards. Each shipment requires a Certificate of Quality Compliance, or mill-material certification, accompanied by every delivery to the customer or DLA depot and submitted separately to the DLA Troop Support Contracting Officer. Continuous marking on every unit must include the DLA contract delivery order number, NSN, specification revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling with legible, durable, waterproof ink that does not contaminate or impair performance; adhesive labels are mandated for small-diameter straight bars, tubes, and shapes under 0.250 inches, while tags are acceptable for wire. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking following MIL-STD-163 and MIL-STD-129, and special codes Z and ZZ applied as defined by ASTM A700. The product must fully comply with the Qualified Suppliers List for Distributors (QSLD) requirement, and only suppliers listed on the QSLD are eligible to bid; non-compliant bids must explicitly declare deviation and risk being rejected or subject to criminal penalties for unauthorized substitution. All material shall conform to SAE AMS6448N and SAE AMS2806 standards, supported by CDRL-METALSCERT, and the total quantity of 259 feet is to be delivered FOB origin within 164 days to DLA Distribution Red River in Texarkana, Texas, with a permitted variance of plus or minus 10 percent, inspected and accepted at destination.

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2052

This contract specifies the procurement of 210 feet of cold-finished, stress-relieved steel bar, 2.000 inches in diameter, in whole-foot lengths of 10 to 12 feet, meeting specification 1117 and governed by ASTM A108 revision dated 03/01/2024, with additional compliance to SAE AMS2806, MIL-STD-129R, and ASTM A700-14. The material must be supplied with a Certificate of Quality Compliance, including mill certification, for every shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. All units must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s heat and lot numbers, and dimensions, using approved methods such as stamping or stenciling that are legible, waterproof, and non-contaminating; adhesive labels are mandatory for bars under 0.250 inches nominal OD. Packaging must comply with RP001 and MIL-STD-129, with individual units palletized per DLA requirements and shipped FOB origin, subject to a 10% quantity variance. The item is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, meaning only suppliers listed on the QSLD are eligible to bid unless they explicitly declare deviation, and non-compliance may result in criminal penalties. The contract waives source inspection for qualified QSLD suppliers, eliminating the need for COQC, PVT, QAP-EQ003, or ASQ H1331 inspections. Delivery is required within 164 days, with an original delivery date of October 22, 2026, and shipment must arrive no later than February 1, 2027, to the DLA Distribution Red River receiving facility in Texarkana, Texas. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards when conflicts arise.

RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Hazardous Materials Compliance and LabelingThe contract requires strict adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) for the handling, labeling, and documentation of hazardous materials. This includes the accurate preparation and maintenance of Safety Data Sheets for all regulated substances, as well as the proper application of hazardous material labels in compliance with federal requirements. The work is governed under a subcontract arrangement with the Defense Logistics Agency, part of the Department of Defense, and performance is expected at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 541690 indicates this procurement is for other scientific and technical consulting services, suggesting the contractor will provide expert compliance support rather than manufacturing or physical distribution of materials.

Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires compliance with MIL-STD-2073-1E for the packaging and preservation of mandrels and expanders, specifically incorporating cleaning and drying procedures followed by preservation method 30 as mandated by DLA RP001. All work must adhere strictly to these military standards to ensure long-term protection, readiness, and functionality of the equipment during storage and transit. The task is scoped under a subcontract and is tied to Defense Logistics Agency operations, with performance occurring at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, indicating a compact window for submission. The NAICS code 493190 categorizes this effort under Other Transportation Support Activities, reflecting its logistical and supply chain nature. While no specific point of contact or set-aside details are provided, the involvement of the Department of Defense and the Defense Logistics Agency underscores the critical nature of the work in supporting military logistics and equipment integrity. Subcontractors must ensure full alignment with all cited standards and timelines to meet contractual obligations.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Component Marking and Labeling ServicesThe contract requires the application of permanent markings on mandrels and expanders, including the manufacturer name, contract number, and stock number, in accordance with specified military standards. Additionally, linen tags must be attached in full compliance with MIL-STD-129 requirements, ensuring standardized identification and traceability for defense logistics purposes. The work is classified as a subcontract under NAICS code 339999 and is managed by the Defense Logistics Agency under the Department of Defense, with performance designated to FPO 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside type specified. The exact point of contact details are not provided, and the contract can be referenced via the official DIBBS platform using the provided link.

All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

Precision Machining of Mandrels and ExpandersThe contract calls for the precision manufacturing of mandrels and expanders in strict accordance with military drawing 5000-s5101-1385500, requiring advanced CNC machining to achieve tight dimensional tolerances and full material compliance with military specifications. The work involves high-accuracy fabrication processes suitable for defense applications, where consistency and reliability are critical to performance and safety. All components must meet exacting standards for geometry, surface finish, and material properties as defined by the referenced drawing. This is a subcontract opportunity under the NAICS code 332721, managed by the Defense Logistics Agency on behalf of the Department of Defense. Responses are due by August 20, 2026, and the place of performance is designated as FPO with ZIP code 09534. The contract was posted on August 9, 2026, and is accessible via the DIBBS platform for qualified subcontractors to submit proposals. No set-aside designation is specified, and all eligible entities may respond provided they can fulfill the technical and compliance requirements.

Precision Turned Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Domestic and International Transportation by SeaThe contract governs the transportation of supplies by sea using U.S.-flag vessels, ensuring compliance with federal requirements for domestic and international maritime shipping. All shipments must be conducted through vessels that are U.S.-owned and -operated, and contractors are required to provide advance notice of planned transports along with ongoing compliance reporting to maintain accountability and regulatory adherence. This obligation applies regardless of the origin or destination of the supplies, reinforcing the priority of U.S. maritime interests in the movement of goods under this agreement. The contract is administered by the Defense Logistics Agency under the Department of Defense, with performance centered at FPO, ZIP 96691, indicating operations tied to military postal addresses often serving overseas installations. The NAICS code 483111 confirms the focus on water transportation of freight and cargo. As a subcontract, this arrangement supports broader federal logistics efforts and requires precise coordination with upstream contractors and government entities. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, leaving a limited window for interested parties to prepare and submit proposals through the designated DIBBS portal.

Deep Sea Freight Transportation

POSTED

about 3 hours ago

DEADLINE

Radioactive Materials Special Handling (If Applicable)The contract requires strict adherence to labeling protocols for radioactive materials when the specific activity exceeds 0.002 microcuries per gram or the total activity reaches or exceeds 0.01 microcuries. Proper marking is mandatory to ensure compliance with safety and regulatory standards, and the contractor must implement procedures to identify, tag, and document all such materials in accordance with established guidelines. This requirement applies to all handling, storage, and transport activities associated with the subcontract and must be consistently followed throughout the performance period. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO with ZIP code 96691. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 561990 indicates it falls under Other Support Services, suggesting the work involves specialized logistical or operational support functions related to radioactive material handling. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.

All Other Support Services

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires the proper handling and labeling of hazardous materials in full compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001, ensuring all safety data sheets and hazard communication protocols are strictly followed. Performance is tied to the Defense Logistics Agency under the Department of Defense, with work to be executed at a military postal address in FPO with zip code 96691, indicating operations may occur in a deployed or overseas context. The solicitation, classified as a subcontract under NAICS code 561990 for other support services, was posted on August 9, 2026, with responses required by August 20, 2026. No set-aside preferences are specified, and the work demands rigorous adherence to federal safety standards for chemical communication and hazardous material management without exception.

All Other Support Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Marking and BarcodingThis contract requires the application of standardized markings and barcodes to military shipments in strict compliance with MIL-STD-129 to enable automated identification, tracking, and storage across the defense logistics network. The work must be performed to support the Department of Defense’s supply chain integrity, ensuring all packages and containers are properly labeled with compliant data structures, including machine-readable barcodes and human-readable information as mandated by the standard. The contract is classified as a subcontract and is administered by the Defense Logistics Agency under NAICS code 561910, indicating it pertains to other support activities for transportation and logistics. Performance is expected to occur at a military postal address with ZIP code 96691, designated as FPO, reflecting the global nature of the delivery requirements. Responses are due by August 20, 2026, and interested parties must submit through the official DIBBS portal prior to the deadline.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging ServicesThe contract requires the packaging of supplied items in full compliance with MIL-STD-2073-1E standards to ensure proper preservation and environmental protection throughout shipment and storage. This includes all necessary materials, procedures, and documentation to safeguard defense-related equipment from degradation due to moisture, corrosion, vibration, and other environmental hazards during transit and long-term storage. The work must meet rigorous military specifications to maintain operational readiness and ensure items arrive in mission-ready condition. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO, ZIP 96691. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 561910, indicating it relates to other support activities for transportation and logistics. The nature of the requirement suggests the need for specialized packaging expertise aligned with federal defense standards, and interested parties must submit proposals through the designated DIBBS platform prior to the deadline.

Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

Butterfly Valve Supply (Commercial Off-The-Shelf Item)The contract solicits the supply of two commercial off-the-shelf butterfly valves designated by NSN 4820016554275, adhering to Defense Logistics Agency specifications. These items are classified under NAICS code 332912 and are intended as subcontracted deliverables to fulfill a requirement of the Department of Defense. The procurement is open for response until August 20, 2026, with the solicitation initially posted on August 9, 2026. Performance of the contract is to be executed at a military post office location with the zip code 96691, indicating delivery to a U.S. defense installation via overseas or remote logistics channels. The procurement is conducted through the DLA’s online procurement system, and no set-aside provisions or specific small business preferences are indicated.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171) ImplementationThe contract requires the implementation and documentation of cybersecurity safeguards mandated by NIST Special Publication 800-171 to protect Controlled Unclassified Information in alignment with Defense Federal Acquisition Regulation Supplement requirements. The work involves deploying technical, administrative, and physical controls to ensure compliance across all systems handling such information, with full documentation to demonstrate adherence to each of the 110 security requirements outlined in the NIST framework. Execution must be completed within the specified performance timeline and verified through auditable records, ensuring readiness for government assessment. This subcontract is issued under the Department of Defense’s Defense Logistics Agency with a NAICS code of 541512, indicating it falls under Computer Systems Design and Related Services. The place of performance is listed as FPO with a ZIP code of 96322-0001, suggesting operations may occur in a deployed or mobile military environment. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, with all work tied to meeting stringent federal cybersecurity standards for defense contractors handling sensitive but unclassified data.

Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

Military Packaging, Packing, and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services for air conditioning units destined for overseas shipment and long-term storage, adhering strictly to MIL-STD-129 and Defense Logistics Agency standards. All work must ensure the units are protected against environmental degradation, properly labeled, and documented to meet rigorous military logistics requirements for global deployment and inventory management. The services must align with the technical specifications and procedural controls mandated by the Department of Defense for defense-related shipments. This is a subcontract opportunity issued by the Defense Logistics Agency under NAICS code 561990, with a response deadline of August 20, 2026. Performance is required at the FPO address with ZIP code 96322-0001, indicating operations will support overseas military logistics networks. The posting date is August 9, 2026, and all bids must be submitted through the DIBBS portal using the solicitation reference SPE8E826T5113. Bidders must be prepared to meet exacting standards for packaging materials, corrosion prevention, barcode labeling, and documentation to ensure seamless integration into military supply chains.

All Other Support Services

POSTED

about 3 hours ago

DEADLINE