This Solicitation opportunity from Department Of Defense was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BAR, METAL

Closed

SPE8E4-26-T-2251Federal

Submission Closed09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332111

New

DIBBS

Titanium Alloy UNS R56400 Round Bar SupplyThis subcontract involves the supply of 52 feet of certified titanium alloy UNS R56400 round bars for prime contractors supporting DLA Troop Support procurement projects. The required materials must be round, drawn, or rolled with a diameter of 0.875 inches and lengths ranging between 10 and 12 feet. All bars must be solution treated and aged in strict accordance with SAE AMS6930G, SAE AMS2809B, and QAP 13873 standards. Managed by the Department of Defense in San Diego, the contract mandates that the supplier maintain a QSLD listing and provide a Certificate of Quality Compliance. Interested parties must respond by November 16, 2026, to fulfill the requirements under NAICS code 332111. Performance for this procurement will take place in San Diego, California.

POSTED

DEADLINE

Alloy Steel Forging SupplyThis subcontract opportunity is for the supply of raw alloy steel forging blanks to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider must source alloy steel that meets the specific metallurgical requirements for NSN 2540-01-500-0309 and provide Mill Test Reports to certify compliance. All delivered materials must strictly adhere to the Buy American Act and the Berry Amendment. The project is designated as a Total Small Business Set-Aside under NAICS code 332111, with performance taking place in Texarkana, Texas. Interested parties must submit their responses by November 16, 2026, to support the Department of Defense agency.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Forged Steel Gear Blanks SupplyThis subcontract involves the supply of raw forged steel gear blanks to prime contractors supporting DLA supply contracts for the Department of Defense, specifically under the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the forging of high-grade alloy steel into near-net shapes using industrial forging presses, followed by necessary heat treatment to ensure all components meet rigorous military and industrial steel standards. To ensure quality and compliance, the provider must furnish comprehensive material certifications and mill test reports for all delivered components. This procurement falls under NAICS code 332111 and was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0700

Solicitation SPE7M2-27-T-000 is a small business set-aside for the procurement of 357 feet of structural angles, identified by NSN 9520010239272. The material must be hot rolled steel, Grade AH-36, conforming to MIL-S-22698 and ASTM-A6 Table A2.7 for equal leg L-shapes, with a 0.250 inch flange thickness and 4.000 inches overall width and height. The items must be produced by an approved steel mill and comply with American Bureau of Shipping rules. Delivery is required within 160 days after receipt of order, with a need ship date of April 26, 2027, and a final required delivery date of June 25, 2027. Shipping is FOB Origin to DLA Distribution Warner Robins in Georgia. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates strict marking and packaging requirements, including compliance with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700, with specific requirements for marking each foot of material and identifying secured lifts on each end. Inspection and acceptance will occur at the destination. Payment shall be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of intentionally added mercury.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0212

Solicitation SPE8E4-27-T-0212 is a small business set-aside request for quotations for the procurement of 27 feet of 4140 steel composite metal bar. The material must be hot rolled, flat, and annealed, with a thickness of 1.000 inch, a width of 6.000 inches, and lengths between 8 and 12 feet in whole foot increments. The product must adhere to SAE AMS6382S and SAE AMS2806 standards. Delivery is required by February 22, 2027, with a need ship date of April 26, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is FOB Origin, and inspection and acceptance will occur at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and MIL-STD-2073-1E, with specific mandates for continuous identification markings and waterproof stenciling or stamping. Failure to comply with these marking requirements is grounds for product rejection. The procurement also incorporates the Buy American Act, the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0447

Solicitation SPE8E9-27-T-0447 is a small business set-aside procurement issued by DLA Troop Support for the supply of 136 feet of metal bar, identified by NSN 9510005004702. The material must be supplied in whole feet lengths only, specifically 10, 11, or 12 feet, and must comply with SAE AMS5659T and AMS2806 standards. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The delivery is set for 160 days after order, with a required delivery date of February 9, 2027, and a need ship date of April 26, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma. Strict quality and marking requirements are mandated, including the provision of a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Continuous identification markings are required on each unit, including the contract delivery order number, NSN, specification details, manufacturer information, and dimensions. Marking must be performed via stamping or stenciling, though adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-STD-163, and ASTM A700. Inspection and acceptance will occur at the destination. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0215

Solicitation SPE8E4-27-T-0215 is a request for quotations for the procurement of 43 feet of Steel Comp 630 metal bar, specifically hot rolled, round, and centerless ground with a 4.000 inch diameter and a reference weight of 48.06 lb/ft. This critical application item must comply with SAE AMS5643W Revision W and be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement requires a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and mandates strict continuous identification markings on each unit of issue, including the contract delivery order number, NSN, and manufacturer details. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract incorporates various federal regulations, including the Buy American Act and the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing. Packaging and preservation must adhere to ASTM A700 and MIL-STD-2073-1E, with marking following MIL-STD-129. Inspection and acceptance will take place at the destination. Quotations are due by November 16, 2026, via the DLA Internet Bid Board System (DIBBS), with a required delivery date of February 2, 2027.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0225

Solicitation SPE8E4-27-T-0225 is a small business set-aside request for the procurement of 56 feet of metal bar, specifically Steel Comp 4130, cold drawn, flat, and annealed. The material must measure 1.250 inches wide by 0.500 inches thick, with lengths provided in whole feet between 10 and 12 feet. Delivery is required within 160 days, with a need ship date of April 26, 2027, and a quantity variance of plus or minus 10 percent is permitted. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with the Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) is mandatory, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001, with specific continuous identification markings required on each unit of issue. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including those for HUBZone price evaluation preference, the Buy American Act, and safeguarding covered defense information. Quotations are to be submitted via DIBBS by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0219

Solicitation SPE8E4-27-T-0219 is for the procurement of 83 feet of annealed, cold-finished hexagonal steel bar (Steel Comp 303) with a width of 0.875 inches across flats and lengths between 10 and 12 feet. The material must comply with ASTM A582/A582M and SAE AMS2806 Revision D standards. Delivery is required within 160 days, with an original required delivery date of February 13, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. A quantity variance of plus or minus 10 percent is permitted. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and forward a copy to the DLA Troop Support Contracting Officer. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are mandatory; failure to comply with these marking methods will result in the rejection of the product. Inspection and acceptance will take place at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0224

Solicitation SPE8E4-27-T-0224 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 51 feet of annealed round steel composite 4130 metal bar. The material must have a diameter of 3.000 inches and be supplied in whole feet lengths between 6 and 20 feet, with a reference weight of 24.033 lb/ft. The requirement is designated as NSN 9510-00-529-7315 and is subject to a quantity variance of plus or minus 10 percent. Delivery is required by April 20, 2027, with a need ship date of April 26, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for eligibility, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging standards apply, including adherence to MIL-STD-129 and ASTM A700, with specific requirements for continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, HUBZone price evaluation preferences, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination, and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0422

This solicitation, SPE8E9-27-T-0422, is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 245 feet of round, annealed steel CRES metal bar. The material must have a nominal outside diameter of 0.875 inches, a weight of 2.044 pounds per linear foot, and individual lengths between 10 and 12 feet. The procurement adheres to material standards SAE AS4340, SAE AMS2806, and SAE AMS6415V. A critical requirement for this award is that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96 are eligible. Delivery is required within 160 days after the award, with a target ship date of April 26, 2027, and an original required delivery date of March 1, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-163, with specific preservation and packing codes ZZ and Z as defined by ASTM A700. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0221

Solicitation SPE8E4-27-T-0221 is a small business set-aside for the procurement of 2,926 feet of cold drawn round metal bars, specifically steel composition 1018/1020 with a 0.500 inch diameter and lengths between 10 and 12 feet. The material must be supplied in whole feet only. This is a critical application item requiring compliance with ASTM A108, ASTM A29/A29M-20, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and the contract includes a price evaluation preference for certified HUBZone small business concerns. The delivery is scheduled for April 2027 with a 160-day delivery window, shipping FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and ASTM A700 for preservation and packing. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, and manufacturer details; failure to comply with these marking standards is grounds for product rejection. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system. The procurement also adheres to the Buy American and Balance of Payments Program and requires compliance with DFARS cybersecurity and telecommunications restrictions.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 12 days

AI Contract Overview

Solicitation SPE8E4-26-T-2251 is a request for quotes from DLA Troop Support Construction and Equipment for the procurement of 218 feet of centerless ground round steel bars. The material must have a diameter of 0.437 inches and be supplied in whole foot lengths between 10 and 12 feet, with a reference weight of 0.511 lb/ft. The procurement is governed by NAICS 332111 and requires compliance with several technical standards, including SAE AMS5643W, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. The contract specifies strict marking and packaging requirements in accordance with MIL-STD-129 and MIL-STD-163, with special packaging codes Z and ZZ following ASTM A700. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are required on each unit. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. Delivery is set for February 28, 2027, with a need ship date of March 1, 2027, delivered FOB Origin to DLA Distribution Jacksonville. Inspection and acceptance will occur at the destination. The solicitation includes a price evaluation preference for certified HUBZone Small Business Concerns and mandates adherence to the Buy American Act and Berry Amendment.

General Info

DLA seeks 218 feet of centerless ground steel bars by February 28, 2027.

Agency

Department Of Defense → JACKSONVILLE BLDG

NAICS

332111 - Iron and Steel Forging

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 15

Solicitation

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → JACKSONVILLE BLDG

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → JACKSONVILLE BLDG

Office AddressUSA

Contacts

Pamela Duffey

contact@example.gov

+1 (555) 000-0000

Full Description

BAR,METAL
BAR<(>,<)> METAL
STEEL COMP 630
ROUND, CENTERLESS GROUND
0.437 IN DIA
10 TO 12 FT LG
0.511 LB/FT (REF)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
SPE8E4-26-T-2251
SECTION B
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 2 IAW BASIC NON GOVT STD SAE AMS5643W REVISION NR W DTD 12/01/2021 PART PIECE NUMBER: SOLUTION HEAT TREATED
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025
SPE8E4-26-T-2251
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD ASTM A700-14 (R 2019) REVISION NR DTD 11/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2806 REVISION NR D DTD 12/20/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018161054 0001 FT 218.000
NSN/MATERIAL:9510006071494
DELIVERY (IN DAYS):0153
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW MIL-STD-163 PACKING Z = MIL-STD-163 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
SPE8E4-26-T-2251
SECTION B
PR: 7018161054 PRLI: 0001 CONT’D
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN +1 (555) 000-0000
JACKSONVILLE FL 32212-0103
US
Need Ship Date:03/01/2027 Original Required Delivery Date:02/28/2027
SPE8E4-26-T-2251 NSN/Part Number: 9510-00-607-1494 Quantity: 218 FT Purchase Request: 7018161054QTY: 218 Delivery: 153 days ADO