This Solicitation opportunity from Department Of Defense was posted on September 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BASEPLATE, ACTUATOR

Closed

SPE4A7-26-T-798GFederal

Submission Closed10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

DIBBS

Manufacturing of Seal Retaining Plates (P/N 3014893)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Oil Pressure Cover Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aircraft Compressor Blade Set FabricationThis subcontract involves the fabrication of 10 complete aircraft compressor blade sets under NSN 2840-00-176-3758 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of precision CNC machining and aerospace-grade alloys to manufacture blades that adhere strictly to technical drawings and quality standards for Critical Safety Items. To be eligible, the manufacturer must hold both SAE AS9100 quality management system certification and specific CSI certification. The contract falls under NAICS code 336412, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2020

Solicitation SPE4A5-27-T-2020 is issued by the DLA Weapons Support ASC Supplier OEM Division for the procurement of four special bands, identified by NSN 2840-01-036-1322 and part number 3023698 from Pratt & Whitney Canada Corp. The required delivery date is October 26, 2026, with a delivery lead time of 20 days after receipt of order. The items are to be shipped FOB Origin to a consignee located in Guvercinlik, Turkey, utilizing A.J. Worldwide Services as the freight forwarder. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

RETAINER, SPRING, VALVE

Solicitation # SPE4A1-27-T-0221

Solicitation SPE4A1-27-T-0221 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for four units of Valve Spring Retainers, identified by NSN 2995011668338 and Meggitt North Hollywood Inc part number 229651. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of March 8, 2027, and an original required delivery date of March 19, 2027. Delivery is FOB Origin, and both inspection and acceptance are to be conducted at the origin. The procurement is subject to rigorous quality and technical standards, including CMMC Level 2 self-assessment and various DLA master list requirements such as configuration change management and tailored higher-level quality requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2023

Solicitation SPE4A5-27-T-2023 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of four special bands. The items are identified by NSN 2840010295271 and Pratt & Whitney Canada Corp part number 3023697. The contract specifies delivery within 20 days after receipt of order, with terms set as FOB Origin. Inspection and acceptance will also occur at the origin. The shipping destination is located in Guvercinlik, Turkey, with logistics coordinated through A.J. Worldwide Services. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Item Unique Identification is not required. The solicitation incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessments. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2040

Solicitation SPE4A5-27-T-2040 is a procurement request from the DLA Weapons Support ASC Supplier Oper OEM Division for 10 aircraft compressor blade sets, identified by NSN 2840-00-176-3758. This is an Air Force designated Critical Safety Item (CSI) and a Foreign Military Sales (FMS) requirement for the Royal Jordanian Air Force. The procurement is governed by NAICS code 336412 and requires adherence to specific technical drawings and quality assurance plans, including SAE AS9100 higher-level quality requirements. Delivery is specified as 20 days after receipt of order, with inspection occurring at the origin and acceptance at the destination. Offerors must comply with strict domestic material restrictions, including the Berry Amendment and the Buy American Act, and provide disclosure for any non-domestic materials. The contract mandates the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and requires registration via the Account Management and Provisioning System (AMPS) for Vendor Shipment Module (VSM) access. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and prohibitions against covered telecommunications equipment. Packaging and marking must strictly follow MIL-STD-129 and MIL-STD-2073-1E standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SHROUD ASSEMBLY, ENGINE

Solicitation # SPE4A7-27-R-X125

Solicitation SPE4A7-27-R-X125 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the supply of Engine Shroud Assemblies (NSN 1560-007683121). Designated as a critical application item, the procurement is intended to provide worldwide support over a five-year term or until an aggregate total of 350,000 dollars is reached. The initial base year includes a guaranteed minimum quantity of 14 units, with a maximum delivery order of 28 units. This is not a small business set-aside, and awardees must be registered in the System for Award Management (SAM). Technical requirements mandate strict adherence to MIL-STD-130 for marking and identification, MA-122 for sheet metal fabrication, and ASME B46.1 for surface texture. The contractor must provide first article units for approval testing within 30 days of award, with the government adding the cost of this testing to the evaluated price. Due to the nature of the item, a Northrop Grumman Licensing Agreement applies, requiring strict data non-disclosure and destruction protocols. Additionally, contractors must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and provide unique identifiers issued by SPRS. Inspection and acceptance are generally conducted at the source, though first article testing is accepted at the destination. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation for award is based on technical acceptability, price relative to estimated annual demand, and the cost of government first article testing. Offers for surplus material are explicitly excluded from consideration.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2055

Solicitation SPE4A5-27-T-2055, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for the procurement of 131 units of Valve Lanyards (NSN 2995-01-166-4158). This critical application item is identified as a commercial product and must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery date is July 4, 2027, with a need ship date of March 14, 2027, and a delivery window of 128 days after order. The contract mandates strict quality and technical compliance, including adherence to the DLA Master List of Technical and Quality Requirements and a manufacturer inspection system complying with SAE AS9003 or ISO 9001. Key requirements include CMMC Level 2 Self-Assessment, MIL-STD-129 marking, and MIL-STD-2073-1E packaging. Inspection and acceptance will occur at the point of origin. Payment and invoicing must be processed electronically through the Wide Area Workflow system. Offerors must submit their quotations by November 5, 2026, and comply with the Buy American Act and other domestic material restrictions.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7370

Solicitation SPE4A6-27-T-7370 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 58 units of Cover, Pivot (NSN 2915012188075). This item is designated as an Air Force critical safety and critical application item, requiring manufacture according to Drawing 2671270 Rev G. The contract mandates strict quality and inspection standards, including compliance with SAE AS9003 or ISO 9001, and utilizes sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance are both set at the point of origin. Delivery is required within 179 days of award, with an original required delivery date of January 19, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, though Item Unique Identification is not required. The procurement includes significant regulatory requirements, such as CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days

AI Contract Overview

Solicitation SPE4A7-26-T-798G is a request for quotations issued by DLA Aviation for the procurement of 14 actuator baseplates, identified by NSN 2915006573581 and Meggitt North Hollywood Inc part number 151261. This is designated as a critical application item with no shelf life requirement. The total quantity is split into two line items of 7 units each, with deliveries required within 161 days. The need ship date is March 16, 2027, and the original required delivery date is June 7, 2027. Deliveries are FOB Origin and will be shipped to DLA Distribution Depots in Hill AFB, Utah, and Tinker AFB, Oklahoma. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of requirements and requiring sampling in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Key administrative requirements include the use of Wide Area WorkFlow for invoicing and a mandatory Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS portal and provide disclosures for any non-domestic materials used.

General Info

DLA Aviation seeks quotes for 14 critical actuator baseplates delivered by June 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contract Value

$26,950

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Awardee

AVAIR, LLC

Award Issued Date

10/08/2026, 12:00:00 AM UTC

Documents

SPE4A7-26-T-798G Request for Quotations

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 27

Solicitation

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUSA

Contacts

James Sinks

contact@example.gov

Full Description

BASEPLATE,ACTUATOR
BASEPLATE, ACTUATOR
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SPE4A7-26-T-798G
SECTION B
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
MEGGITT NORTH HOLLYWOOD INC 79318 P/N 151261
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018391437 0001 EA 7.000
NSN/MATERIAL:2915006573581
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
SPE4A7-26-T-798G
SECTION B
PR: 7018391437 PRLI: 0001 CONT’D
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:03/16/2027 Original Required Delivery Date:06/07/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018391437 0002 EA 7.000
NSN/MATERIAL:2915006573581
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
SPE4A7-26-T-798G
SECTION B
PR: 7018391437 PRLI: 0002 CONT’D
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/16/2027 Original Required Delivery Date:06/07/2027
SPE4A7-26-T-798G NSN/Part Number: 2915-00-657-3581 Quantity: 7 EA Purchase Request: 7018391437QTY: 14 Delivery: 161 days ADO