Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Batch Testing and Certificate of Analysis (COA) Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards independent laboratory testing services for coating batches to verify physical and chemical properties such as density, viscosity, grind fineness, dry and hard time, sag resistance, and color consistency. Each testing regimen must comply with the DI-MISC-82386 standard, and a certified Certificate of Analysis must be issued for every batch tested. The work is designated as a Service-Disabled Veteran-Owned Small Business Set Aside under NAICS code 541380, indicating the contract is reserved for eligible small businesses owned by service-disabled veterans. Performance is required at the facility in Bremerton, Washington, with a zip code of 98314, and the ordering activity is DLA Maritime - Puget Sound under the Department of Defense. The contract was posted on April 30, 2026, and is structured as a subcontract, indicating it supports a larger procurement effort within the defense supply chain.

General Info

Service-disabled veteran-owned business to test coating batches per DI-MISC-82386 in Bremerton, WA for DLA Maritime.

Agency

Department Of Defense → DLA Maritime - Puget Sound

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPMYM226Q0028.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHERPLATE WHITE OAP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 30

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent laboratory testing of coating batches for physical and chemical properties including density, viscosity, grind fineness, dry/hard time, sag resistance, and color, with issuance of DI-MISC-82386-compliant Certificate of Analysis.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 5 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 5 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 5 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 10 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

Compliance Certification and Testing ServicesThis small business set-aside subcontract for DLA Maritime - Puget Sound involves providing compliance certification and testing services in Bremerton, Washington. The selected contractor will perform quality verification for prime contractors, specifically validating material weight, dimensions, and fire and weather resistance according to A-A-55308 standards. Additionally, the scope includes ensuring color matches against FED STD 595 Green #24108 and verifying all marking requirements. To execute these tasks, the contractor must utilize spectrophotometry tools and textile testing equipment. The primary deliverable for this engagement is a completed Certificate of Compliance in accordance with DI-MISC-81356A. This project falls under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

Waterproof and Fire-Resistant Laminated Cloth Manufacturer/SupplierThis small business set-aside subcontract involves the manufacture and supply of specialized waterproof, fire-resistant, and weather-resistant laminated cloth for prime contractors supporting DLA Maritime projects. The supplier is required to produce plastic vinyl chloride cloth that adheres to FED STD 595 and A-A-55308 Type 1 Class 3 FM 1 standards. Technical specifications mandate a mercury-free composition, a weight between 17.1 and 19.8 oz/sq yd, and the inclusion of black bold Arial FR markings every 24 inches. The contract requires the delivery of 150 rolls of compliant, marked cloth to the Puget Sound Naval Shipyard located in Bremerton, Washington. Managed under the Department of Defense, this procurement falls under NAICS code 313310 and is specifically designated as a total small business set-aside.

Textile and Fabric Finishing Mills

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

Supply of .524" Brass Pop-A-Plug CPI/Perma KitsThis small business set-aside subcontract involves the supply of 80 brass plugging kits for prime contractors supporting DLA Maritime projects at the Puget Sound Naval Shipyard in Bremerton, Washington. Each kit must include ten .524 inch plugs and one Universal Go/No-go gage, specifically designed to withstand operating pressures of 1000PsiG and temperatures up to 400F. The required hardware is specified as Curtiss-Wright EST Group part number V524B or an approved equivalent. All deliverables must adhere to ASTM-D-3951 and MIL-STD-130 packaging standards to ensure compliance with Department of Defense requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 15 hours

Solicitation # SPMYM227Q1108

Solicitation SPMYM227Q1108 is a total small business set-aside for the procurement of 80 units of .524 inch Brass Pop-A-Plug CPI/Perma Kits, brand name or equal to Curtiss-Wright EST Group. Each kit must include ten plugs and one universal go/no-go gage, meeting specific technical requirements for maximum pressure of 1000PsiG and temperature of 400F. The award will be made to the technically acceptable offeror that is most advantageous to the government, based on price and past performance. Delivery is requested by November 27, 2026, with the destination being the Puget Sound Naval Shipyard in Bremerton, Washington. The contract is a fixed-price agreement requiring electronic invoicing through Wide Area Workflow. Packaging must comply with ASTM-D-3951 and MIL-STD-130 for unique item identification, with a strict prohibition on materials such as asbestos and loose fill polystyrene. Contractors must be registered in the System for Award Management and may be required to implement NIST SP 800-171, though commercial off-the-shelf items are exempt. Submissions must include a signed solicitation and unit-based pricing, with any equal-to product offers requiring full manufacturer specifications for technical evaluation.

Saw Blade and Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 15 hours

LAMINATED CLOTH

Solicitation # SPMYM227Q1111

Solicitation SPMYM227Q1111 is a total small business set-aside issued by DLA Maritime - Puget Sound for the procurement of 150 rolls of waterproof, fire-resistant, and weather-resistant laminated cloth. The required material is plastic vinyl chloride in Green #24108, measuring 50 inches wide by 50 to 65 yards long, with a weight between 17.1 and 19.8 ounces per square yard, conforming to FED STD 595 and reference part number A-A-55308 Type 1 Class 3 FM 1. Deliveries are requested by November 30, 2026, with a destination of the Puget Sound Naval Shipyard in Bremerton, Washington. A Certificate of Compliance per DI-MISC-81356A is required for the primary line item. The contract is awarded on a firm-fixed-price basis to the responsible offeror deemed most advantageous to the government, considering price, technical requirements, and past performance. Bids must be submitted via email to Donna Todd by October 29, 2026. To be deemed responsive, submissions must include a signed and completed solicitation, unit pricing, lead times, and manufacturer details. Specific marking requirements include the letters FR in black bold Arial font every 24 inches along the cloth. Invoicing must be processed electronically through Wide Area Workflow (WAWF). Contractors must comply with the Procurement Integrity Act and, unless the items are identified as Commercial Off The Shelf, must provide a current NIST SP 800-171 assessment.

Textile and Fabric Finishing Mills

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

Specialized Electrical Component SupplyThis subcontract, titled Specialized Electrical Component Supply, involves the provision of subsea-rated electrical components for prime contractors working on DLA Maritime projects under the Department of Defense. The scope of work includes the manufacture or sourcing of rectifiers, inductors, and Metal Oxide Varistors specifically meeting the specifications for part number 149-5399-00. All deliverables must be provided as component kits and adhere to strict quality and traceability standards, including manufacturer batch identification, CAGE codes, and origin documentation in compliance with DLAD Proc Note C03 and the Counterfeit Detection and Avoidance Program. The opportunity is designated as a total Small Business Set Aside under NAICS code 335910, with the place of performance located in Bremerton. Managed by DLA Maritime - Puget Sound, the contract requires a rapid response timeline, with a posting date of October 27, 2026, and a response deadline of October 29, 2026.

Battery Manufacturing

POSTED

DEADLINE

in about 18 hours

35KVA Subsea Transformer Assembly ManufacturingThis small business set-aside subcontract through DLA Maritime - Puget Sound involves the manufacture and supply of two 35KVA subsea transformer assemblies, specifically part number 149-5399-00. The scope of work requires the integration of rectifiers, inductors, fuses, and Metal Oxide Varistors into a subsea-rated unit, with performance taking place in Bremerton. The contractor must adhere to strict military standards for marking and labeling per MIL-STD-130 and MIL-STD-129. Additionally, the project mandates NIST SP 800-171 compliance and strict adherence to DLAD Proc Note C02/C03 traceability requirements to ensure all components meet Department of Defense specifications.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 18 hours

TRANSFORMER ASSEMBLY

Solicitation # SPMYM227Q1102

DLA Maritime Puget Sound is soliciting quotes for a firm-fixed-price supply contract to procure two transformer assemblies, specifically 35KVA subsea units with rectifiers, inductors, fuses, and MOVs, under part number 149-5399-00. The designated source for these items is Tinitron Inc. This procurement is a 100% total small business set-aside and utilizes commercial and simplified acquisition procedures per FAR Parts 12 and 13.5. Delivery is required by January 11, 2027, with shipping terms as FOB Destination to the Puget Sound Naval Shipyard IMF in Bremerton, Washington. To be deemed responsive, offerors must submit a fully completed solicitation package by October 29, 2026, including pricing on a unit price line item basis, CAGE codes, lead times, and manufacturer specification sheets. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on technical criteria, price, and past performance evaluated via the Supplier Performance Risk System. Contractors must maintain active registration in SAM.gov and adhere to strict marking and labeling standards per MIL-STD-130 and MIL-STD-129. Additionally, unless the items are identified as Commercial Off The Shelf, awardees may be required to implement NIST SP 800-171 cybersecurity standards. Invoicing must be processed electronically through Wide Area Work Flow.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

in about 18 hours

Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Installation & System Integration ServicesThe contract entails on-site installation, calibration, and full integration of advanced 3D scanning systems with existing software and hardware infrastructure at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. The work involves ensuring seamless compatibility between the new scanning technology and current military-grade systems, requiring specialized technical expertise to support naval operations and maintenance workflows. All services must be performed directly at the facility, with no remote or off-site alternatives permitted. This is a subcontract awarded under a Total Small Business Set-Aside classification per FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 238990 applies to other specialized construction services. The contract is managed by DLA Maritime under the Department of Defense and was posted on July 1, 2026, with performance expected to occur at the shipyard location. The nature of the work demands compliance with federal defense standards, secure handling of proprietary systems, and coordination with shipyard personnel to minimize operational disruptions during implementation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Water Quality Monitoring and Reporting Services

242-NETWORK Contract Office 02 (36C242)

POSTED

CLOSED

Inspection, Certification, and Repackaging Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Quality Assurance and Inspection Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Hazardous Material Compliance and Labeling Services

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

Technical Data Packaging and Labeling Compliance

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Quality Assurance & Testing Services for Fasteners

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

First Article Testing (FAT) Services for Wire Rope

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Radioactive Materials Notification and Handling

MEDICAL SUPPLY CHAIIN FSH

POSTED

CLOSED

Shelf-Life Compliance and Quality Assurance

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Quality Assurance and Traceability Documentation

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Quality Inspection and Testing Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Packaging Compliance with MIL-STD-2073-1E

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS