Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Battalion Reconnaissance Uncrewed Aircraft Systems (UAS)

Closed
W58RGZ-26-S-C001-003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-27-T-1276
Solicitation SPE7MC-27-T-1276 is a Department of Defense procurement issued by the Defense Logistics Agency for the acquisition of 23 units of Valve Bodies (NSN 4820-00-026-3258). This requirement is designated as a Navy Identified Critical Safety Item and is being issued under the First Destination Transportation program. The delivery is required within 161 days after the award, with a need ship date of April 20, 2027, and a final required delivery date of July 8, 2027. The place of performance and delivery is Cherry Point, North Carolina, with shipping terms set as FOB Origin. Offerors must submit all quotes via the DLA Internet Bid Board System (DIBBS) and are encouraged to provide quantity ranges to accommodate volatile demand. Compliance with domestic material restrictions, including the Buy American Act and the Berry Amendment, is mandatory, and any non-domestic materials must be disclosed. The contract requires adherence to strict quality standards, including SAE AS9100 or equivalent, and specifies that additive manufacturing is prohibited unless explicitly authorized. Additionally, contractors must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and are required to register via the Account Management and Provisioning System (AMPS) to access the Vendor Shipment Module. Inspection and acceptance will occur at the origin.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-27-T-1289
Solicitation SPE7MC-27-T-1289 is a federal procurement issued by the DLA Weapons Support Maritime Hardware/Electrical for four units of a valve body parts kit for press regulating valves, identified by NSN 4820-00-968-6699. This is designated as a critical application item with reference part numbers from Kitco LLC and Meggitt North Hollywood Inc. The required delivery is 147 days after order, with a need ship date of April 6, 2027, and an original required delivery date of March 19, 2028. Shipping is FOB Origin to DLA Distribution Cherry Point in North Carolina. The contract mandates strict quality and technical compliance, requiring manufacturers to adhere to ISO 9001:2015 or an equivalent standard. Technical specifications include the use of ASTM F 104-03 for non-asbestos gaskets and compliance with DLA packaging requirements (RP001), MIL-STD-2073-1E, and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination. Offerors must provide a complete data package for alternate parts, and additive manufacturing is prohibited unless specifically authorized. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, CMMC Level 2 Self-Assessment, and safeguarding of covered defense information. Evaluation may include a HUBZone price preference, and the procurement may be eligible for automated award if first article testing is not required.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 336411
New
DIBBS
STIFFENER, AIRCRAFT
Solicitation # SPE4A7-27-T-2217
Solicitation SPE4A7-27-T-2217 is a small business set-aside request for the procurement of nine aircraft stiffeners under NSN 1560-01-552-0071 for the DLA Weapons Support ASC. The contract requires delivery within 166 days after order, with a need ship date of April 20, 2027, and a final required delivery date of November 1, 2027. Performance is based on specific technical drawings, including basic drawing 82918 5-88108 and several reference drawings, with strict adherence to ASME standards for surface texture and dimensional tolerances. The procurement prohibits the use of additive manufacturing, and the successful offeror must maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Key compliance requirements include CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and specific part marking per MIL-STD 130 that must include the phrase For Military Use Only along with the manufacturer and design activity CAGE codes. Packaging must follow DLA requirements and ASTM D3951 for non-hazardous materials, while shipment marking must comply with MIL-STD-129. Inspection and acceptance will occur at the origin. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Evaluation factors include a price preference for HUBZone small businesses and the mandatory submission of Safety Data Sheets for any hazardous materials.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The U.S. Army Contracting Command – Redstone Arsenal is issuing a Call for Solutions under Commercial Solutions Opening W58RGZ-26-S-C001-003 to acquire commercially available Vertical Take-Off and Landing Uncrewed Aircraft Systems for Battalion-level Reconnaissance, Surveillance, and Target Acquisition missions. This effort supports the Army’s modernization goals in Multi-Domain Operations and the Department of Defense’s strategic objective of Drone Dominance by leveraging innovative commercial technologies rather than custom development. The system must be a Group 2 VTOL UAS with autonomous flight capabilities, capable of operating in all weather conditions and at night, with a minimum range of 40 km, five hours of endurance, and dual payload capacity including EO/IR, communications relay, lethal effects, and electronic warfare modules. All systems must meet strict mandatory requirements outlined in Attachment 2, including weight limits, tool-free assembly, and resilience against APNT degradation. Proposals must be submitted as a single unclassified whitepaper not exceeding ten pages in 12-point Arial font, with a total file size under 10MB, via email by the deadline of May 6, 2026. Award will be made through a best-value tradeoff process where technical solution and production capability are jointly more important than price. Offerors must demonstrate compliance with all 20 mandatory system characteristics and prove the ability to produce at least 20 complete systems per 30-day cycle. Price will be evaluated for reasonableness but will not be the deciding factor. Additional mandatory requirements include active SAM.gov registration with a UEI and CAGE code, a current NIST SP 800-171 assessment in SPRS, and compliance with DFARS 252.204-7019 and NIST SP 800-171 for cybersecurity. Offerors must also comply with NDAA Section 848 by providing a full Bill of Materials and supply chain verification plan if any components originate from covered foreign countries, particularly China. Organizational conflicts of interest must be fully disclosed with a mitigation plan under FAR 9.5, and the Government requires enhanced data rights including Government Purpose Rights for interfaces and technical documentation to support training, sustainment, and repair. Deliveries will be made to CONUS and OCONUS locations under a Basic Ordering Agreement, with final inspection and acceptance occurring at the delivery destination using the Wide Area Workflow system for invoicing, and all packaging,

General Info

U.S. Army seeks commercially available Group 2 VTOL UAS for reconnaissance with autonomous flight, 40 km range, 5-hour endurance, dual payloads, and strict cybersecurity and production requirements.

NAICS

336411 - Aircraft Manufacturing

Place of Performance

Redstone Arsenal, AL, USA

Set-Aside

NONE

Documents

3

Attachment 2 - System Characteristics (Battalion Reconnaissance UAS)

PDF, High priority: read this firstspecifications
High

W58RGZ-26-D-C001-002 Attachment 1 - Statement of Objectives

PDF, High priority: read this firstsow
High

W58RGZ-26-S-C001-003 Battalion Reconnaissance UAS Call for Solutions

PDF, High priority: read this firstrfp
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-0000, USA
Office AddressREDSTONE ARSENAL, AL, 35898-0000, USA
Contacts
Angela Andrews
MAJ David Butz

Full Description

Show more

The U.S. Army Contracting Command – Redstone Arsenal (ACC-RSA) is issuing this Call for Solutions (abbreviated “C4S” hereafter) against Commercial Solutions Opening (CSO) W58RGZ-26-S-C001 under the authority of 10 U.S.C. § 3458. This C4S will competitively acquire innovative commercial, Vertical Take-Off and Landing (VTOL) Uncrewed Aircraft Systems (UAS) for the Battalion Reconnaissance UAS effort described below. The Government reserves the right to alter or cancel this call at any time.


The purpose of this effort is to provide Battalion Commanders and their organizations with an organic Reconnaissance, Surveillance and Target Acquisition (RSTA) capability. This effort aligns with the Army's modernization priorities to operate in Multi-Domain Operations (MDO) and the Department of War's (DoW) strategic objective of achieving Drone Dominance. Through this C4S, the Army ensures that industry remains informed of its changing needs, fostering ongoing investment and innovation in UAS technologies to address future opportunities.


Please read the Call and the Attachments, in their entirety, for detailed submission information.

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 336413
New
Federal
Amendment 0004 Overhaul of RADIATOR GEARBOX
Solicitation # W58RGZ-26-B-0016
Solicitation W58RGZ-26-B-0016 is a total small business set-aside for the inspection and overhaul of UH-60 radiator gearboxes (NSN 1615-01-158-9514, P/N 70361-03004-103) to ensure continued airworthiness per Army Regulation 70-62. The contract is structured as a five-year Firm-Fixed-Price Indefinite Delivery Indefinite Quantity (IDIQ) agreement. The scope includes the disassembly, inspection, and repair of components, with specific deliverables including overhauled units, scrap management for assets beyond economical repair, and the provision of required containers. Award will be granted to the responsive and responsible bidder offering the lowest total price based on the provided pricing template. Amendment 0004 extends the proposal submission deadline to November 30, 2026, at 5:00 PM CST, due to the discontinuation of PADDS. Eligible bidders must be registered in SAM.gov under NAICS code 336413. Key requirements include compliance with ISO 9001:2000 quality standards, CMMC level 2 self-assessment, and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-130N for item unique identification. Invoicing and receiving reports are managed through the Wide Area WorkFlow (WAWF) system. Performance involves a tiered delivery schedule, with initial Product Verification Audit assets due 60 days after award and subsequent overhauled units delivered at a maximum rate of 12 per month.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
Federal
Military Plans Specialist Support Services
Solicitation # ASGJOCS0011
The Military Plans Specialist Support Services contract, solicitation number ASGJOCS0011, provides operational and strategic planning advisory support to the Area Support Group-Jordan (ASG-J) Operations Directorate (S-3). The contractor is responsible for coordinating and executing operational and contingency plans, exercises, and force protection programs to support United States Army Central (USARCENT) and USCENTCOM entities. Key duties include developing physical security and force protection plans (30%), leading deliberate and crisis action planning using JOPES/APEX (30%), supporting exercises through the Military Decision Making Process and Joint Operational Planning Process (20%), and providing inter-agency representation and staff coordination (20%). Personnel must possess an active Secret security clearance, meet CENTCOM medical and theater entry requirements, and be eligible for overseas travel, with anticipated business travel within the USCENTCOM area of responsibility up to 20% of the time. The position follows a standard civilian non-personal service baseline per FAR 37.104, with a typical work week of Sunday through Thursday and approximately 1,920 productive hours per year. Required expertise includes proficiency in Army regulations regarding Base Operations Support-Integrator (BOS-I), the U.S.-Jordanian Defense Cooperation Agreement, and the ability to author formal military orders and executive briefings. The submission deadline for this sources-sought effort is November 4, 2026.
Administrative Management and General Management Consulting Services

POSTED

4 days ago

DEADLINE

in 7 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS