Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Battery 9V

Active

Z5149State & Local

Response Deadline09/15/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids under solicitation number Z5149 for the procurement of 588 units of 9V alkaline batteries provided in 12-count packaging. The approved products for this request are specifically limited to Rayovac AL9V-12 and Duracell MN1604BKD, and alternate brands will not be accepted. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The bid was posted on September 8, 2026, and must be submitted through the Bid Center by 2:00 pm local time on the closing date of September 15, 2026. It is the responsibility of the vendor to contact the procurement lead, Shanna Faulk, to clarify any discrepancies between ordering descriptions and part numbers prior to the deadline. Performance and delivery will take place in Nashville, Tennessee.

General Info

Nashville Electric Service seeks bids for specific 9V batteries by September 15, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335910 - Battery ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

RFB Z5149 - 9V Alkaline Batteries

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedSep 8

Solicitation

Response DeadlineSep 15

Submission deadline

Response Deadline

09/15/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, USA

Contacts

Shanna FaulkProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

EA BATTERY, 9V 9 VOLT ALKALINE BATTERY IN 12-COUNT PACK AGING. RAYOVAC AL9V-12 DURACELL MN1604BKD Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _

Similar Contracts

Same NAICS industry code

Storage Battery Supplier (NSN 6140015417245)

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT SEALED LEAD ACID

POSTED

about 18 hours ago

DEADLINE

Storage Battery Supplier (NSN 6140-01-108-2159)

POSTED

about 18 hours ago

DEADLINE

Storage Battery Supplier

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Storage Battery Supplier (NSN 015391163)

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Supply of NSN 0155-35-175 Electrical Component

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5128

This contract is for the procurement of one sealed lead acid 12 volt storage battery, identified by NSN 6140-01-541-7245. The item is designated as a critical application item and must adhere to specific technical and quality requirements set forth in the DLA Master List. Delivery is required within 20 days after the order, with the final destination being the USS NANTUCKET (LCS 27). The battery is a Type I shelf-life item with a total duration of 12 months and must have at least 85 percent, or 10 months, of its shelf life remaining upon delivery. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, including specific hazardous materials protocols. If the battery meets nonspillable criteria under 49 CFR, it is exempt from certain shipping paper and labeling requirements provided it is securely packed and marked as nonspillable. Sampling and inspection will occur at the destination according to MIL-STD-1916 or ASQ H1331.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT SEALED LEAD ACID

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2385

Solicitation SPE7L7-26-Q-2385 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of lead acid storage batteries, specifically NSN 6140-21-914-2918 and part number PS-12180NB by Power Sonic Corp. The requirement is split across three line items totaling 14 units, with delivery required within 60 days after order. Shipments are destined for the USNS Lansing in Loxley, Alabama, and the USNS Lewis and Clark via FPO AP. The items are designated as critical application components with a non-extendable shelf life of 12 months. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the batteries are hazardous materials, the contractor must comply with IP025 and FED STD 313D, providing necessary Material Safety Data Sheets and certifying materials via a HAZDEC form. Inspection and acceptance are conducted at the origin, with sampling performed according to MIL-STD-1916 or ASQ H1331. Award will be based on technical conformity and a comparative price assessment via DIBBS, with evaluation also considering Buy American and Balance of Payments policies. Invoicing and payment must be processed through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5121

This contract is for the procurement of one 12-volt lead acid storage battery, part number PG-12V35FR by Power-Sonic Corporation, under solicitation SPE7L7-26-T-5121. The item is classified as a commercial off-the-shelf product and must be supplied with two bolts and two washers for cable attachment. It carries a non-extendable shelf life of 12 months and must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. The battery is destined for the USS Arlington LPD 24, with delivery required within 20 days. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, specifically addressing the shipment of hazardous materials. The contract prohibits the intentional addition of mercury except for functional use within the battery. Inspection and acceptance will take place at the destination.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5133

This contract is for the procurement of 12 sealed lead acid, valve regulated batteries with gelled electrolyte, identified by NSN 6140-01-604-2781 and part number 8G4D LTP from East Penn Manufacturing Co. The items are subject to a non-extendable Type I shelf life of 12 months and must be delivered to the Commanding Officer at Blount Island in Jacksonville, Florida, within 20 days. The supplier must adhere to strict quality and safety standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Due to the hazardous nature of the materials, the contractor is required to provide Safety Data Sheets and Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard 313-E. Additionally, the contract prohibits the intentional addition of mercury except where functionally required, and mandates specific packaging and shipping protocols for hazardous materials.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5129

Solicitation SPE7L7-26-T-5129, issued by DLA Land and Maritime, is a request for quotations for the procurement of two wet lead acid storage batteries, specifically the Interstate Battery System 0FA13 P/N MTP-78DT (NSN 6140-01-600-9507). These are designated as critical application items and are classified as commercial off-the-shelf products. The required delivery date is January 5, 2026, with a delivery window of 20 days after the order. Shipping is FOB Destination to the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. The contract mandates strict quality and safety standards, including a non-extendable six-month shelf life (Type I) and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the items are hazardous materials, the contractor must comply with the Hazard Communication Standard and IP025 for shipping. Inspection and acceptance will occur at the destination per FAR 52.246-1, utilizing zero-based sampling plans. Payment must be processed electronically through the Wide Area Workflow system. Additionally, the procurement is subject to the Buy American Act and DFARS restrictions regarding domestic sourcing and the prohibition of intentionally added mercury.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2389

This firm fixed price contract is for the procurement of two storage batteries, part number CFR12V29 by EaglePicher Technologies LLC, for delivery to the USS Oregon. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 60 days after order, with inspection and acceptance occurring at the point of origin. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Because the batteries are hazardous materials, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels in accordance with OSHA and Federal Standard 313-E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract prohibits the intentional addition of mercury except where functionally required.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2390

This contract solicitation from the Defense Logistics Agency involves the procurement of two storage batteries, identified by NSN 6140-01-539-4777 and part number CFR12V29 from Eaglepicher Technologies LLC. The acquisition is structured as a Firm Fixed Price contract with a delivery requirement of 60 days after receipt of order. The items are classified as Type I critical application items with a non-extendable shelf life of 12 months. Inspection and acceptance will occur at the destination, and the supplier must ship the goods via traceable means, specifically avoiding parcel post, to the Naval Submarine Base in Groton, CT. Strict compliance with technical, quality, and safety standards is required. Suppliers must adhere to DLA packaging requirements and specific sampling methods such as MIL-STD-1916 or ASQ H1331. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional use. Furthermore, because these are hazardous materials, suppliers must submit Safety Data Sheets (SDS) and compliant Hazard Communication Standard labels to the contracting officer for approval prior to the award. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Stainless Steel Flat Washer Supplier

Hardware Manufacturing

POSTED

DEADLINE

Supply of Portable Waste Containment Units

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Can Liner Medium

Solicitation # Z5154

Nashville Electric Service is soliciting bids under solicitation number Z5154 for the procurement of 26,000 medium weight can liners measuring 23 by 10 by 39 inches. The contract requires specific approved manufacturers and part numbers, and alternate brands will not be accepted for this inquiry. Vendors must provide their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The bid was posted on September 8, 2026, and must be submitted through the Bid Center by 2:00 pm local time on the closing date of September 11, 2026. It is the responsibility of the vendor to resolve any discrepancies between ordering descriptions and part numbers with the procurement contact, Bailey Allen, prior to the deadline. This solicitation is categorized under NAICS code 423840 and will be performed in Nashville, Tennessee.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Switch Knife 3P

Solicitation # Z5150

Nashville Electric Service is soliciting bids for the procurement of seven 3P back connected knife switches, specifically model AVO MULT MTS-S-203-D-B. The required configuration includes BC barriers, ganged handles, dividers, and TBT-26 long studs, with no mounting bar. This solicitation, identified as Z5150, is restricted to the specified brand, and alternate brands will not be accepted. Bids must be submitted via the Bid Center by 2:00 pm local time on September 15, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may influence the award decision. It is the vendor's responsibility to resolve any discrepancies between the ordering description and part number with the procurement contact, Shanna Faulk, prior to the closing date.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

LED 4FT TB Bulbs

Solicitation # Z5152

Nashville Electric Service is soliciting bids under solicitation number Z5152 for the procurement of 1,000 LED 4FT TB bulbs. The required specifications are Sylvania 4FT TB 12WATT CCT bulbs, specifically part number GPDIM8SC12BF or equal. Alternate brands will not be accepted for this inquiry, and vendors seeking to have other products evaluated for future use must contact the buyer. Bids must be submitted through the Bid Center by 2:00 pm local time on September 11, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. For any discrepancies between the ordering description and part number, vendors must contact the primary procurement contact, Bailey Allen, for clarification before the closing date.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Terminal Compression

Solicitation # Z5147

Nashville Electric Service is soliciting bids under solicitation number Z5147 for 400 tinned aluminum service lugs. These 500 MCM terminal compression connectors must feature two-hole 1/2 inch studs, be NEMA spaced for aluminum or copper cable, and be compatible with a 1-15/16 die compression tool. Each lug must be imprinted with the manufacturer and conductor size. Approved parts include Burndy YCA35R-2N, BRN ATL-5002, ASKINC ALM50012/1.75TP, RTE CORP 8037220B06M, HOMACAL 500 NTN, and RICHARDS AL18-2N. Bids must be submitted via the Bid Center by 2:00 pm local time on September 11, 2026. Alternate brands are not accepted for this inquiry, and vendors are responsible for clarifying any discrepancies between ordering descriptions and part numbers before the closing date. The award process will take into account the earliest delivery time provided in calendar days. The primary point of contact for this procurement is Bailey Allen in Nashville, Tennessee.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5155

Nashville Electric Service is soliciting bids under solicitation number Z5155 for the procurement of 53 treated wood poles, each 50 feet in length and Class 2. The poles must be constructed from either Southern Pine according to NES specification 33-151R13 or Douglas Fir according to NES specification 33-252R10, and all units must be roofed and gained in accordance with NES drawing 910. The selected vendor is responsible for shipping the poles via truck freight to various yards in Nashville, Tennessee, and must provide the necessary equipment and operators to unload the poles. Deliveries are accepted Monday through Friday from 6:30 AM to 2:30 PM CST, and all poles will be subject to inspection by a company designated on the purchase order. Bidders must submit their proposals through the Bid Center by 2:00 PM local time on September 18, 2026. When bidding, vendors should state their earliest delivery time in calendar days, as the delivery schedule may be a deciding factor in the award of the contract.

Wood Preservation

POSTED

DEADLINE

Stainless Steel Bolts and Washers

Solicitation # Z5151

Nashville Electric Service is soliciting bids under solicitation Z5151 for the procurement of stainless steel hardware. The requirement consists of two primary items: 210,000 stainless steel hexagon head machine bolts measuring 1/2 inch in diameter by 1 3/4 inches long with 13 threads per inch UNC Class 2A, manufactured from Alloy 304 in accordance with ANSI/ASME B18.2.1. Additionally, the contract requires stainless steel Belleville spring washers for 1/2 inch bolts, featuring a 17/32 inch inner diameter, 1 1/4 inch outer diameter, and 0.125 inch thickness, manufactured from Alloy 17-7PH. Strict packaging requirements are mandated, with bolts packaged 50 per box and washers packaged 100 per box, as bulk packaging will not be accepted. Alternate brands are not permitted for this inquiry. Bidders must submit their proposals through the Bid Center by 2:00 pm local time on September 14, 2026. Delivery timelines provided in calendar days may be considered during the award process. The primary point of contact for this procurement is Bailey Allen.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # Z5153

Nashville Electric Service has issued solicitation Z5153 for the procurement of 1,000 anchor shackles with a minimum ultimate strength of 30,000 lbs. Each unit must include a bolt, nut, and cotter key. Approved specifications include Anderson AS-25-L-BNK, Line Har AS-2B, and Maclean ASH-55-BC. Alternate brands will not be accepted for this inquiry, and vendors seeking future evaluation of other products must contact the buyer. Bids must be submitted via the Bid Center by 2:00 pm local time on September 11, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. In the event of discrepancies between part numbers and descriptions, vendors must contact the procurement representative, Bailey Allen, for clarification before the closing date.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Bag Porta John Emergency

Solicitation # Z5148

Nashville Electric Service has issued solicitation Z5148 for the procurement of 250 emergency portable restroom bags, specifically requiring the BriefRel BR500 model. The required units must feature a puncture-resistant, odor-proof triple-layer construction, a gel formula for waste neutralization, a one-way funnel to prevent backflow, and a snap-top closure with a locking handle. Each unit must also include an antimicrobial wipe and 12 feet of toilet paper. Alternate brands are strictly prohibited for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on September 11, 2026. Vendors are required to specify their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The primary procurement contact for this solicitation is Kyle Kegley, Buyer II. All inquiries regarding discrepancies between part numbers and descriptions must be resolved with the buyer prior to the closing date.

Toilet Preparation Manufacturing

POSTED

DEADLINE

Stainless Steel Washers

Solicitation # Z5146

Nashville Electric Service is soliciting bids under solicitation Z5146 for the procurement of 15,000 stainless steel flat round Type A washers designed for 1/2 inch diameter bolts. The required washers must be manufactured from Stainless Steel Alloy 18/8 and strictly adhere to specification MS #15795-819, with dimensions of 0.562 inch inner diameter, 1.375 inch outer diameter, and 0.109 inch thickness. ASE standards are explicitly not acceptable for this requirement. Bidders must submit their proposals through the Bid Center by 2:00 pm local time on September 10, 2026. A critical requirement for the award is the specification of the earliest delivery time in calendar days, as delivery speed may be a determining factor in the selection process. Additionally, strict packaging guidelines are mandated, requiring items to be packed 100 per box; bulk packaging will not be accepted. The primary procurement contact for this solicitation is Bailey Allen.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Heavy Haul Transport (Transformers)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS