Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Battery Access Door Assembly Manufacturing

Active

State & Local

Response Deadline11/02/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Battery Access Door Assembly Manufacturing supports prime contractors on procurement projects for the Dallas Area Rapid Transit agency in Texas. The scope of work involves the fabrication of door panels and frames, the integration of essential components including hinges, latches, and seals, and the execution of rigorous inspections to ensure all assemblies conform to technical drawings and manufacturer part numbers. The project falls under NAICS code 332311 and requires the delivery of fully completed and inspected battery access door assemblies. Interested parties should note the posting date of October 28, 2026, with a response deadline set for November 2, 2026.

General Info

Subcontract for manufacturing and inspecting battery access door assemblies for Dallas Area Rapid Transit.

Agency

Texas → Dallas Area Rapid Transit

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2101158.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ASSEMBLY, BATTERY ACCESS DOOR - ref 2101158

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 08:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies battery access door assemblies for prime contractors on Dallas Area Rapid Transit (DART) procurement projects. Fabricates door panels and frames, integrates hinges, latches, and seals, and performs inspections to ensure conformance to manufacturer part numbers and technical drawings. Delivers completed, inspected battery access door assemblies.

Similar Contracts

Same NAICS industry code

JSCG-P - Pre-Engineered Building Supplies With Roof Panels at Escuela Cosecha Amistad, Veracruz, Panama

Solicitation # W912CL-27-Q-0000

The Department of Defense is conducting market research to identify qualified vendors capable of purchasing and transporting materials for a pre-engineered building in Veracruz, Panama. The project involves the delivery of supplies to construct an 11M x 15M x 5.5M structure with roof panels at Escuela Cosecha Amistad. A critical requirement is that the interior of the canopy must remain clear space to allow for soccer and basketball activities. All materials must be delivered on-site by March 2027. This is a sources sought notice and not a formal solicitation. Interested parties must submit a technical capability statement demonstrating their ability to procure and deliver prefabricated building supplies across Panama, along with a rough order of magnitude for estimated pricing. Submissions are due to MAJ Vernon Shank by November 9, 2026, at 12:00 PM CST.

0410 Aq Hq Contract

POSTED

about 18 hours ago

DEADLINE

Modular Building Supply and InstallationThis subcontract for Modular Building Supply and Installation involves the provision of turnkey, code-compliant modular workspace units for prime contractors working on Texas Military Department facility projects at Camp Mabry. The scope of work includes the fabrication of modular units, transportation management, installation on existing foundations, and the management of mate lines. To ensure structural integrity and compliance, the contractor must provide sealed engineering calculations and drawings. The project requires a dedicated project manager and superintendent, with a mandate to provide EMR and OSHA 300 logs for safety verification. The ultimate goal is the delivery of fully occupancy-ready modular facilities. Interested parties must respond by November 17, 2026, under NAICS code 332311.

Texas Military Department

POSTED

DEADLINE

Solicitation # SPMYM227Q1113

Solicitation SPMYM227Q1113 is a 100% total small business set-aside for a firm fixed-price supply contract to provide roof tarpaulins for the DLA Maritime Puget Sound. The required items include roof tarps in sizes 8'5" x 100' (P/N 5972374 or TI-L-2.57MX30) and 8'5" x 70' (P/N TI-L-2.57MX22.5M), both of which must be compatible with Layher brand scaffolding roof trusses. Delivery is FOB Destination to Bremerton, Washington, with a requested delivery date on or before November 5, 2026. The procurement falls under NAICS code 332311 and PSC 5440. Offers are due by November 2, 2026, at 10:00 AM PDT. To be considered, bidders must be registered in SAM.gov, provide unit price line-item pricing, submit manufacturer information, and complete all required representations and certifications. Award will be based on the most advantageous offer, considering price, technical criteria, and past performance evaluated via the Supplier Performance Risk System. Packaging must adhere to ASTM-D-3951 and MIL-STD-129 standards, with specific prohibitions on materials like asbestos and loose fill polystyrene. Invoicing must be processed electronically through Wide Area Work Flow using a combo invoice and receiving report.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Bus Shelters and Amenities

Solicitation # 26-15

Ben Franklin Transit is soliciting proposals under RFP 26-15 for the design, fabrication, and delivery of prefabricated bus stop shelters to serve its urban transit system in Washington. The project requires shelters to be structurally engineered by a registered architect, weatherproof, vandal-resistant, and compliant with all applicable building codes and ADA requirements. Key technical specifications include the use of clear tempered safety glass, anti-graffiti coating, and a preference for tinted polycarbonate roof materials, while polycarbonate panel inserts are rejected. Shelters must be shipped knock-down for on-site assembly and must be capable of supporting future on-time arrival technology displays without structural modification. Optional amenities may include ADA-compliant benches, lean rails, trash receptacles, bicycle racks, and solar-powered LED lighting. The contract has a maximum value of 950,000 dollars and a potential five-year term, with an initial minimum order of ten shelters to be delivered within 120 calendar days of the Notice to Proceed. Price adjustments for subsequent years are capped at 5 percent based on the CPI. BFT requires a minimum three-year workmanship warranty and a five-year finish warranty, with replacement parts guaranteed for ten years. Proposals must be submitted via the OpenGov portal by December 8, 2026, at 2:00 pm PDT. Evaluation is based on the best interest of BFT, and awarded contractors must register with the System for Award Management within five days of notification. Payment terms are set at 30 calendar days following the receipt of a proper invoice.

POSTED

DEADLINE

in about 1 month

Metal Pipe Assembly SupplierThis subcontract involves the manufacture or sourcing of one Metal Pipe Assembly, identified by NSN 4710015413878, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier must ensure that all materials and assembly tools comply with the DLA Master List of Technical and Quality Requirements to meet strict technical specifications. The project falls under NAICS code 332311 and will be performed in Buzzards Bay, Massachusetts. Interested parties must respond by November 9, 2026, to provide the completed assembly as required by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Compressor Valve Assemblies (NSN 4130-00-795-5015)This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the procurement of 35 compressor valve assemblies under NSN 4130-00-795-5015. The selected provider is responsible for sourcing or manufacturing the assemblies, ensuring they are designated country end products, and adhering to strict military standards for packaging and marking per MIL-STD-2073-1E and MIL-STD-129. All units must be delivered within 115 days after the order is placed. The opportunity is categorized under NAICS code 332311 and is designated as a Total Small Business Set-Aside. Interested parties must respond by November 5, 2026, to support prime contractors fulfilling DLA supply contracts. Performance will take place in the 17070-5002 zip code area.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340016522378)This subcontract involves the precision manufacture and supply of 6,000 mounting brackets, identified by NSN 5340016522378, for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The production must strictly adhere to Part Number 7018894609, Basic Drawing NR 19207 12580799 (Rev 07/01/2015), and Reference Drawing NR 19207 12580799 (Rev 05/14/2021), while maintaining compliance with the DLA Technical and Quality Master List of Requirements. The project falls under NAICS code 332311 and specifies Fort Bliss, Texas, as the place of performance. Interested parties must note the posted date of October 29, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Laminated Vehicular Window (NSN 2510219123610)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the provision of one warranted laminated glass vehicular window. The required item must match NSN 2510219123610 and correspond to part numbers WELDCO-BEALES [phone hidden] or R575120. The final product is to be delivered to the NAVSUP Joint Consolidation Point in Mechanicsburg, Pennsylvania. Strict adherence to military standards is required for the fulfillment of this contract. Shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Special Marking Code 07 and RP001 palletization requirements. The opportunity is categorized under NAICS code 332311, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Tube Assembly ManufacturingThis subcontract involves the manufacture of custom metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work requires the fabrication of assemblies based on six specific reference drawings using precision tube bending and welding equipment. The contractor is responsible for performing First Article Testing and providing all necessary material certifications to ensure compliance with technical specifications. The final deliverables consist of nine units of NSN 4710010267138 along with a comprehensive FAT report. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332311.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

PROC-26-3457 Supply and Delivery of Modular Rapid Assembly Training Venues

Solicitation # 26-3457

The Scottish Police Authority is seeking a single contractor for the supply and delivery of modular rapid assembly training venues under solicitation number 26-3457. This procurement process is designed to secure a provider capable of delivering specialized modular structures to meet the organization's training facility requirements. The solicitation was posted on October 29, 2026, with a response deadline set for November 30, 2026. Interested parties may coordinate with the point of contact, Ewen Macluskie, to facilitate the submission process before the closing date.

Scottish Police Authority

POSTED

DEADLINE

Solicitation_S-280C/G Vehicle Mounted Shelter

Solicitation # W912CH-26-R-A096

The Army Contracting Command - Detroit Arsenal is soliciting proposals for a five-year, Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity contract for the manufacture and delivery of four variants of the S-280C/G Vehicle Mounted Shelter. These tactical military shelters, available in shielded and unshielded versions with or without mobilizer adapter kits, are designed to protect personnel and sensitive electronic equipment from demanding field environments and electromagnetic interference. The contract has a minimum guaranteed value of 100,000 dollars and a maximum estimated ceiling of 4,000,000 dollars. This is a 100 percent small business set-aside under NAICS 332311, with award based on a best-value tradeoff process evaluating technical factors, specifically EMI shielding design and manufacturing processes, and price. The scope of work includes first article testing, production, and the delivery of associated technical and logistics data, including the update of Technical Manual TM 10-5411-207-13&P. Manufacturing must strictly adhere to the Government-owned Technical Data Package and ASTM E1975-22 standards. Key delivery requirements include a first article test report due within 240 calendar days of contract award and a maximum monthly production rate of 20 shelters. Deliveries are FOB Destination, with an estimated distribution of 75 percent to CONUS locations, such as Sierra Army Depot, and 25 percent to OCONUS locations including Germany, Korea, or Japan. Due to the export-controlled nature of the technical data, offerors must possess a valid DD Form 2345 certification.

POSTED

DEADLINE

Manufacturing of Water Trailer Faucets (NSN 4510014330396)This subcontract involves the manufacture of 98 single faucets for prime contractors supporting DLA Troop Support supply contracts for M149A2 and M1112 400-gallon water trailers. The units must be fabricated according to TDP Rev A Gen 1 and Basic Drawing NR 19207 12406415, featuring 3/4 inch NPT inlet connections. All products must ensure potable water safety and adhere to MIL-STD-1916 or ASQ H1331 sampling standards. The project is managed under the Department of Defense through the Albany Transportation Officer. Strict compliance with the Buy American Act and the Berry Amendment is required for all materials used. The performance of the contract will take place in Albany, Georgia.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Specialized Freight & LogisticsThis subcontract for Specialized Freight and Logistics involves providing freight transportation and delivery services for prime contractors working on Dallas Area Rapid Transit projects. The primary scope of work focuses on the transport of conversion kits under FOB Destination terms, requiring the contractor to ensure all materials maintain merchantable quality and strictly adhere to critical delivery schedules. The contractor is responsible for delivering these kits to designated DART facilities for final inspection and acceptance. This opportunity falls under NAICS code 484110 and is associated with the Dallas Area Rapid Transit agency in Texas.

General Freight Trucking, Local

POSTED

DEADLINE

Precision Component Manufacturing (Conversion Kit)This subcontract for Precision Component Manufacturing involves the fabrication and supply of specialized conversion kits for prime contractors working on Dallas Area Rapid Transit projects. The scope of work requires the manufacture of components designed to transition equipment from M.A. to S.I. standards, strictly adhering to provided technical drawings and manufacturers' part numbers. To ensure all S.I. tolerances are met, the contractor must utilize precision CNC machining and rigorous quality control measurement tools. The final deliverable consists of completed and inspected conversion kits. This opportunity is associated with NAICS code 332710 and is managed through the Dallas Area Rapid Transit agency in Texas.

POSTED

DEADLINE

KIT, CONVERSION, M.A. TO S.I. | 2101625

Solicitation # 2101625

Solicitation number 2101625 is issued by the Dallas Area Rapid Transit Authority for a conversion kit from M.A. to S.I. The procurement requires all bids to reflect FOB Destination shipping terms with freight costs included in the overall price. Time and rate of delivery are critical, as failure to meet specified schedules may result in rejection or termination for default. The contract is governed by the laws of the State of Texas, and the Authority is exempt from state and local sales and use taxes. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate and include detailed information such as the purchase order number, item descriptions, quantities, and unit prices. The seller must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. Additionally, the seller must adhere to equal opportunity employment standards and ensure all deliverables meet the specified drawings and technical requirements.

Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

POSTED

DEADLINE

Brake Cylinder Pressure Gauge SupplierThis subcontract involves the supply of specialized brake cylinder pressure gauges for prime contractors working on Dallas Area Rapid Transit projects in Texas. The selected supplier is responsible for manufacturing or sourcing gauges that strictly adhere to designated part numbers and technical drawings, ensuring all components meet the necessary specifications for transit braking systems. The scope of work includes performing rigorous inspections and accuracy tests to verify compliance and guarantee merchantable quality. All verified gauges must be delivered FOB Destination. This opportunity is categorized under NAICS code 333415, with a response deadline set for November 5, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

PRESS.GAUGE,BRAKE CYL. | 2101615

Solicitation # 2101615

Solicitation 2101615 is a procurement request by the Dallas Area Rapid Transit Authority for brake cylinder pressure gauges. The contract requires the seller to provide supplies of merchantable quality that conform to all specified drawings, technical requirements, and manufacturer part numbers. Bidders must provide quotes based on FOB Destination shipping terms, with all freight costs included in the overall price. Time and rate of delivery are critical, and failure to meet specified delivery schedules may result in rejection or termination for default. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate to the designated email address and include the purchase order number, item descriptions, quantities, and extended totals. The Authority is exempt from Texas state and local sales and use taxes. The agreement is governed by the laws of the State of Texas, with venue in Dallas County. Sellers must certify compliance with various ethical and legal standards, including the prohibition of boycotts against Israel, the absence of interests involving public officials, and the certification that they are not associated with foreign terrorist organizations. Additionally, the seller must adhere to equal opportunity employment practices.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Supply of Manual Actuation SwitchesThis subcontract involves the procurement and delivery of manual actuation switches for prime contractors working on Dallas Area Rapid Transit projects. The scope of work requires the sourcing and delivery of switches that strictly adhere to specific manufacturer part numbers and technical drawings. To ensure quality and compliance, the provider must perform all necessary inspections and tests to verify that the components meet technical requirements and merchantable quality standards. The contract is categorized under NAICS code 423610 and is managed through the Dallas Area Rapid Transit agency in Texas. Following successful inspection and formal acceptance of the hardware, the provider is responsible for delivering the physical switches to the designated destination. The solicitation was posted on October 30, 2026, with a response deadline of November 4, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

SWITCH, MANUAL ACTUATION - ref 2101194

Solicitation # 2101194

Solicitation 2101194 is a purchase order issued by the Dallas Area Rapid Transit Authority in Texas for the procurement of manual actuation switches. The contract requires the seller to provide supplies that conform to all specified drawings, technical requirements for manufacturers part numbers, and product descriptions. The seller must ensure all items are of merchantable quality and suitable for their intended purpose, with inspection and acceptance occurring at the destination. Key administrative terms include a payment window of 30 days from the receipt of the invoice or the order, whichever is later. The seller must adhere to strict ethical and legal certifications, including verifying they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. Additionally, the seller must comply with equal opportunity employment standards and acknowledge that the Authority is exempt from Texas state and local sales and use taxes.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Hex Head Cap Screw SupplierThis subcontract agreement establishes a partnership for the supply of hex head cap screws to prime contractors working on Dallas Area Rapid Transit procurement projects. The selected supplier is responsible for the sourcing or manufacture of screws based on specific size and quantity requirements, ensuring all products meet merchantable quality standards and strictly conform to technical specifications and manufacturer part numbers through rigorous inspections. Logistical responsibilities include managing FOB Destination shipping to ensure the timely delivery of conforming hardware to designated locations. This opportunity falls under NAICS code 332722 and is managed by the Dallas Area Rapid Transit agency in Texas, with a response deadline set for November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Third-Party Quality Assurance and Testing for Coil UnloaderThis subcontract involves providing third-party quality assurance and testing services for the Dallas Area Rapid Transit agency. The primary objective is to perform independent inspections and technical tests for prime contractors to ensure that Coil Unloader Assemblies conform strictly to all technical drawings and specifications. The selected provider will utilize precision measurement and testing equipment to verify conformity and will be responsible for delivering detailed inspection reports and certificates of conformance. This opportunity falls under NAICS code 541380 and is associated with procurement projects managed by the agency in Texas.

Testing Laboratories and Services

POSTED

DEADLINE

Coil Unloader Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of a complete Coil Unloader Assembly for prime contractors working on Dallas Area Rapid Transit projects in Texas. The selected provider is responsible for manufacturing the assembly in strict accordance with provided technical drawings and manufacturer part number specifications to ensure merchantable quality and suitability for its intended use. The contract requires the completed assembly to be delivered FOB Destination. Interested parties must respond by the deadline of November 5, 2026, for this procurement opportunity categorized under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Specialized Pins SupplyThis subcontract involves the sourcing and manufacture of specialized pins for prime contractors working on Dallas Area Rapid Transit procurement projects. The selected provider is responsible for producing hardware components that adhere strictly to exact technical specifications and drawings, ensuring all materials conform to specific manufacturer part numbers through rigorous quality inspections. The scope of work includes the delivery of completed and inspected hardware components shipped FOB Destination. This opportunity is categorized under NAICS code 332510 and is associated with the Dallas Area Rapid Transit agency in Texas.

Hardware Manufacturing

POSTED

DEADLINE

PIN,SPECIAL | 2101647

Solicitation # 2101647

Solicitation 2101647 is a purchase order issued by the Dallas Area Rapid Transit Authority for special pins. The solicitation was posted on October 30, 2026, with a response deadline of November 5, 2026. Bidders must register via Bonfire to access the bid table and submit their responses. All quotes must reflect FOB Destination shipping terms with freight costs included in the overall price, as the Authority typically does not accept FOB Origin or Prepay and Add terms. Delivery timing and rates are critical, and failure to meet specified schedules may result in rejection or termination for default. The contract is governed by custom Purchase Order Terms and Conditions rather than standard FAR clauses. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. Invoices must be submitted in triplicate and include specific details such as the purchase order number, item descriptions, quantities, and unit prices. The Authority is exempt from Texas state and local sales and use taxes. Sellers must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. Additionally, the Seller must adhere to equal opportunity employment standards and warrants that all provided goods are of merchantable quality and conform to all technical specifications.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS