Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Battery Cell Supply and Obsolescence Management

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2418
Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Solicitation # SPE7L7-26-Q-2417
The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 9 days
NAICS: 335910
New
DIBBS
61--BATTERY,STORAGE
Solicitation # SPE7L7-26-Q-2412
The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The contract involves the supply of 126 units of battery cell with NSN 6140-01-697-0347, requiring active production verification, full traceability, and strict compliance with obsolescence avoidance protocols to ensure long-term sustainment and operational readiness. The items must be sourced from current production lines with documentation proving continuous manufacturing and authenticity, avoiding any risk of counterfeit or retired components. All materials are subject to stringent quality controls aligned with Department of Defense standards. Issued under the NAICS code 335910 for battery manufacturing, this is a subcontract opportunity posted by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The solicitation was made available on July 23, 2026, with responses due by August 3, 2026. The performance location and point of contact details are not specified, but compliance with defense supply chain integrity requirements is mandatory. Contractors must demonstrate proven capability in managing end-of-life components, maintaining full lot traceability, and ensuring uninterrupted production continuity to meet mission-critical timelines.

General Info

Supply 126 battery cells with full traceability, active production, and DoD compliance to avoid obsolescence and counterfeits.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335910 - Battery ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-26-Q-2064.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CELL, BATTERY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 126 units of battery cell (NSN: 6140-01-697-0347) with active production verification, traceability, and obsolescence avoidance compliance.

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 335931
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4330
The contract entails the procurement of eight power supply units identified by NSN 6130-01-553-7134 and part number LT-3103-4 under solicitation SPE7L7-26-T-4330, issued as a Service-Disabled Veteran-Owned Small Business Set Aside with a NAICS code of 335931. Delivery is required within 57 days after order placement to the DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms mandating that pricing includes transportation to a contiguous U.S. destination selected by the offeror. The unit of issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, though the DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM requirements. Palletization must conform to DLA's RP001 guidelines, and all items must be prepared for shipment using the specified parcel post address. The contract includes mandatory cybersecurity compliance via CMMC Level 2 self-assessment and adherence to NIST SP 800-171 requirements for safeguarding covered defense information, with flow-down obligations to subcontractors. Hazardous materials require labeling consistent with OSHA’s Hazard Communication Standard and MIL-STD-129, while items containing radioactive materials above specified thresholds must be marked in accordance with the same standard. Quality assurance protocols mandate sampling under MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No pricing information is provided within the solicitation, and the contract value remains unestablished; however, payment will be processed exclusively through WAWF using required documentation such as invoices and receiving reports. Offerors must hold a valid Unique Entity Identifier and CAGE code, certify their SDVOSB status, and comply with all representations and certifications regarding socioeconomic eligibility, employee eligibility verification, trafficking in persons, sustainable products, and whistleblower protections. The contract prohibits the use of covered telecommunications equipment from designated foreign adversaries, restricts compensation of former DoD officials to prevent organizational conflicts of interest, and requires timely reporting of cyber incidents. All proposals must be submitted electronically via DIBBS by the stated response deadline
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-245F
Solicitation SPE7MC-26-T-245F is a total small business set-aside issued by DLA Land and Maritime for the procurement of 142 valve bodies (NSN 4810-01-485-3588) under NAICS code 332911. A critical technical requirement specifies that the outside threads on the valve body must be manufactured in a counter-clockwise direction, and the contractor is required to inspect the items to ensure compliance. The delivery period is 157 days after order, with a need ship date of February 16, 2027, and a final required delivery date of March 29, 2027. The place of performance and delivery is the DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the origin. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 certification and the safeguarding of covered defense information. Technical data is subject to ITAR or EAR export controls, requiring offerors to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. The use of Class I ozone-depleting substances and mercury compounds in preservation or packaging is prohibited. All quotes must be submitted via the DIBBS portal by September 11, 2026, and electronic invoicing must be processed through the Wide Area WorkFlow system.
Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS