This Solicitation opportunity from Government of Canada was posted on December 12, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BATTERY MODULE CYCLER AND SIMULATOR

Closed

25-58151International

Submission Closed12/12/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

DIBBS

ANALYZER, BLOOD GLUCOSE

Solicitation # SPE2DH-27-T-0532

Solicitation SPE2DH-27-T-0532, issued by the DLA Troop Support Medical Supply Chain FSH, is a small business set-aside for the procurement of four Prodigy Pocket Meter Kits in blue. These blood glucose analyzers are lightweight, no-coding devices that power on automatically upon test strip insertion, providing accurate results in seven seconds. The devices feature a 120-test memory with date and time tracking, and the ability to calculate 7, 14, and 28-day averages. The items are designated under NSN 6630-01-690-1933 and must be delivered to the USS ILLINOIS (SSN 786) in Pearl Harbor, HI, by November 16, 2026. The contract mandates strict adherence to Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129, and packaging requirements under MIL-STD-2073-1E. All units must be delivered in suitable sealed commercial containers to prevent damage. Quality and technical requirements are governed by the DLA Master List, with a specific non-extendable shelf-life requirement of 36 months; notably, no more than five months can elapse between the date of manufacture and delivery. Administrative compliance requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and basic safeguarding of contractor information systems.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2611

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Accessories for Keysight N5242A

Solicitation # 27E-646A-RF

FA2263 Aflcmc Romk Afmetcal

POSTED

DEADLINE

Night Vision Devise (NVD) Test Set (NVDTS)

Solicitation # ACCDTANVDTS

POSTED

DEADLINE

Aircraft Electrical Component Test Stand (AECTS)

Solicitation # 70Z03826QK0000014

Solicitation 70Z03826QK0000014 is a request for quotation for the Department of Homeland Security Aviation Logistics Center to procure and install a factory-new Aircraft Electrical Component Test Stand (AECTS). The project involves the disconnection and removal of the existing test stand and the delivery, installation, and commissioning of a turn-key system capable of supporting power generation components for H-65, MH-60T, HC-144, HC-27, C-130H, and C-130J aircraft platforms. The scope of work includes providing on-site training, extended warranty options, and comprehensive operator, calibration, and maintenance manuals. Performance will take place at the Aviation Logistics Center in Elizabeth City, North Carolina, with a required post-award kickoff site visit within ten calendar days of award. This is an unrestricted requirement under NAICS code 334515, and award will be made to the lowest priced, technically acceptable offeror. Technical acceptability is based on the ability to provide new equipment that meets all specified technical criteria and the requirement for offerors to maintain active registration in the Defense Logistics Agency Joint Certification Program. Quotations must be submitted by December 15, 2026, and should include pricing for the equipment, installation, training, and removal of the old system on a FOB Destination basis. Final acceptance is contingent upon a successful Acceptance Test Plan and the provision of an Equipment Operability Certification.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Solicitation # N0010427QNA36

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks a firm-fixed-price contract for the repair of five Automatic DA Servers across two line items. The contractor is required to perform a teardown and evaluation of the carcasses within 90 days of receipt and provide a comprehensive repair quote. A requested repair turn around time of 50 days is established, with a provision for price reductions if the contractor fails to meet this timeline. All repair work must adhere to the contractor's standard overhaul practices and original manufacturer specifications, and the final products must be mercury-free for use on submarines and surface ships. The contract mandates strict quality assurance and packaging standards, including compliance with MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system. Award consideration is limited to authorized distributors of the original manufacturer. Evaluation of the offeror will be based on the Supplier Performance Risk System, focusing on item, price, and supplier risk. The resulting award will be certified for national defense under the Defense Priorities and Allocations System and includes a one-year warranty from the date of delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

RFP-A27-0590 Vector Network Analyzer

Solicitation # A27-0590

Ames Laboratory - DOE Contractor

POSTED

DEADLINE

Provision of Electrical Testing and Inspection Equipment for UNICEF-Kabul

Solicitation # LRFQ-2026-9207300

UNICEF has issued a Request for Quotations, solicitation number LRFQ-2026-9207300, for the provision of electrical testing and inspection equipment to be used in Afghanistan. Interested suppliers must be registered as a company or NGO within the United Nations Global Marketplace and have completed all mandatory registration information to access the tender documentation and submit an offer. The procurement process is managed through the UNICEF e-submissions system. Bidders are encouraged to express interest via the UNGM tender notice and opt in early to identify all mandatory document placeholders and questionnaires. All submissions must be free of corrupt or damaged files to avoid invalidation, and vendors are advised to monitor the system regularly for updates, clarifications, or deadline extensions.

POSTED

DEADLINE

Electrical Cable Test Set ManufacturingThis subcontract involves the manufacture or sourcing of 32 warranted electrical cable test sets for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. All units must be produced according to NSN 6625-01-572-5184 specifications, with a strict prohibition on unauthorized additive manufacturing. The project requires adherence to RA001 quality control standards and strict compliance with MIL-STD-2073-1E and MIL-STD-129 packaging requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334515. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to provide the required equipment for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Tripod Jack BracesThis subcontract involves the procurement of 127 tripod jack braces, identified by NSN 1730-00-671-3305, to support prime contractors for the Department of Defense. The selected provider is responsible for manufacturing or sourcing hardware that strictly adheres to established technical specifications, including compliance with MIL-STD-130N marking requirements and ITAR/EAR regulations. The contract mandates strict adherence to the Buy American Act and prohibits the use of hexavalent chromium in the production process. Performance for this requirement is centered in Cherry Point, and the procurement falls under NAICS code 334515.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services involves the technical testing and validation of the first production unit for prime contractors under Defense Logistics Agency supply contracts. Specifically, the contractor will utilize specialized testing rigs and measurement tools to evaluate the performance and durability of one unit of NSN 2520/15257524. The scope of work includes coordinating in-process verification and final inspections with the government Quality Assurance Representative to ensure all standards are met, culminating in the delivery of a validated prototype unit and a certified First Article Test Report. The opportunity is set aside for Women-Owned Small Businesses under NAICS code 334515 and is managed by the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to be considered for this technical validation project.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services supports prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The scope of work involves executing testing per CLIN 0002 to verify harness continuity, insulation, and physical dimensions in strict accordance with DLA technical specifications. The contractor will utilize specialized testing rigs and measurement equipment to document all results for government approval, ultimately delivering a comprehensive FAT Report and an approved first-article sample. The project is categorized under NAICS code 334515 and will be performed in Anniston, Alabama. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The National Research Council of Canada is soliciting bids for the procurement of a single-channel battery cycler and simulator system. This equipment is intended to enhance battery pack and module prototyping capabilities at the new AST U91 laboratory, supporting the testing and simulation of custom battery technologies developed within AST and CEI facilities, as well as future collaborative projects. This federal solicitation, identified by number 25-58151, is managed by the Government of Canada with the place of performance located in Ottawa. Interested parties must adhere to the response deadline of December 12, 2025, and may direct inquiries to the primary point of contact, Jonathan Soles.

General Info

NRC seeks bids for a battery cycler and simulator system by December 12, 2025.

Agency

Government of Canada → National Research Council of Canada

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

*Ottawa, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 12

Solicitation

Response DeadlineDec 12

Deadline has passed

Submission Closed

12/12/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → National Research Council of Canada

Office AddressN/A

Contacts

Jonathan SolesPoint of Contact

Full Description

The National Research Council of Canada seeks to procure a single-channel battery cycler and simulator system to enhance the battery pack and module prototyping capabilities at the new AST U91 laboratory. This advanced system will facilitate testing and simulation of custom battery modules or packs, incorporating battery technologies developed at AST and CEI facilities, as well as those from future NRC collaborations.