Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Department Of Defense was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BATTERY POWER SUPPL

Closed
SPE7L7-26-T-4081Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-27CU
Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 5 days
NAICS: 335999
New
DIBBS
59--INSULATION SLEEVING,EL
Solicitation # SPE4A6-26-U-4183
Solicitation SPE4A6-26-U-4183 is a request for quotations issued by the ASC Commodities Division of the Department of Defense for the procurement of electrical insulation sleeving, identified by NSN 5970010203420. This is a Women-Owned Small Business set-aside under NAICS code 335999. The government intends to award a unilateral Simplified Indefinite-Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum ceiling of 350,000.00 dollars. The estimated annual quantity is 474 units, with a guaranteed minimum of 47 units and an expected average of two orders per year. Delivery is required within 117 days after order, with shipping to various CONUS and OCONUS DLA Depots under FOB Origin terms. The material must be procured in one continuous length on a reel or spool and marked according to MIL-STD-129. Packaging must comply with RP001 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Award will be based on the most advantageous offer considering price and other factors, though items produced via additive manufacturing are ineligible. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically via DIBBS by September 25, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 13 days

General Info

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

570 PATRIOT AVE #43 WESTOVER ARB, WESTOVER AFB, MA, 01022-1613, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7L7-26-T-4081 for DLA Land and Maritime

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA

Full Description

Show more
BATTERY POWER SUPPL
BATTERY POWER SUPPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials
SPE7L7-26-T-4081
SECTION B
delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html SHELF LIFE TYPE II, 12 MONTHS MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TESLA INDUSTRIES INC 0VWE2 P/N TIMV3000GPU-24
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017220623 0001 EA 1.000
NSN/MATERIAL:6130014755321
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:H
UNIT CONT:E8 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
SPE7L7-26-T-4081
SECTION B
PR: 7017220623 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
Land Transport (ADR/RID) # The product fulfills the requirements of Special Provision 188 of ADR/RID and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. Sea Transport (IMDG) The product fulfills the requirements of Special Provision 188 of IMDG-Code and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. Air Transport (IATA) The product fulfills the requirements of Special Provision A45 of IATA-DGR and is therefore, keeping within the prescribed quantity limits, excepted from the application of the Dangerous Goods regulations. "Per U.S. DOT:
If battery meets nonspillable criteria listed in 49 CFR § 173.159(f) and 173.159a(d)(1). Nonspillable batteries are excepted from 49 CFR Subchapter C requirements, provided that the following criteria are met:
1. The batteries must be securely packed in strong outer packagings and meet the requirements of 49 CFR § 173.159a.
2. The batteries' terminals must be protected against short circuit.
3. Each battery and their outer packaging must be plainly and durably marked ""NONSPILLABLE"" or ""NONSPILLABLE BATTERY"". The exception from 49 CFR, Subchapter C means shipping papers need not show proper shipping name, hazard class, UN number, and packing group and hazardous labels are not required when transporting a nonspillable battery."
PARCEL POST ADDRESS:
M00985
COMMANDING OFFICER
MASS-6 MACG-48 4TH MAW
570 PATRIOT AVE #43 WESTOVER ARB
WESTOVER AFB MA 01022-1613
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M00985
SUPO M00985 T: 413-593-2219
MASS-6 MACG-48
570 PATRIOT AVE BOX 43
WESTOVER AFB MA 01022-1613
US
M/F: (TCN) M0098561670003
RDD: 197
PROJ: TP 3
SUPP ADD: YMT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: CV
SPE7L7-26-T-4081
SECTION B
PR: 7017220623 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:06/23/2026
SPE7L7-26-T-4081 NSN/Part Number: 6130-01-475-5321 Quantity: 1 EA Purchase Request: 7017220623QTY: 1 Delivery: 20 days ADO

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 335910
New
DIBBS
61--BATTERY,STORAGE
Solicitation # SPE7L7-26-Q-2412
The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.
Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS