Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BATTERY POWER SUPPLY

Active
SPE7L7-26-T-4383Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a sealed lead acid battery with a Type I shelf life of 12 months, non-extendable, classified as a commercial off-the-shelf item with available catalog data for evaluation of alternatives. The battery must comply with strict hazardous material regulations, prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a second boundary of containment as defined by NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. Packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating Type I shelf life, and palletization governed by DLA packaging requirements. The item is to be delivered FOB origin within 10 days, with no quantity variance allowed, inspected and accepted at destination. Shipment must use the fastest traceable means, excluding parcel post, to the designated military address in Carlisle, PA, with no delivery date earlier than July 10, 2026. The contract is issued under solicitation SPE7L7-26-T-4383 by the Defense Logistics Agency and identifies the NSN 6130-01-418-5230 for a single unit at a total price of one dollar.

General Info

Sealed lead acid battery, 12-month non-extendable shelf life, compliant with hazardous material rules, FOB origin, delivery by July 10, 2026, one unit for one dollar.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

502 CAVALRY ROAD, CARLISLE, PA, 17013-1699, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
MARIA BLANEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BATTERY POWER SUPPLY
POWER SUPPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BATTERY CHEMISTRY: SEALED LEAD ACID SHELF LIFE TYPE I, 12 MONTHS
COMMERCIAL OFF THE SHELF ITEM. ADEQUATE CATALOG
DATA IS AVAILABLE AT THE PROCUREMENT AGENCY TO
EVALUATE ALTERNATE OFFERS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
SPE7L7-26-T-4383
SECTION B
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
SMART POWER SYSTEMS, INC. 3B2M0 P/N SPSAV-2830GPU TESLA INDUSTRIES INC 0VWE2 P/N TI1000GPU-24
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017493812 0001 EA 1.000
NSN/MATERIAL:6130014185230
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EB CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:D
UNIT CONT:E8 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
SPE7L7-26-T-4383
SECTION B
PR: 7017493812 PRLI: 0001 CONT’D
W9077Q
W8SW PA ARNG FMS 24
502 CAVALRY ROAD
CARLISLE PA 17013-1699
US
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W9077Q
W8SW PA ARNG FMS 24
502 CAVALRY ROAD
CARLISLE PA 17013-1699
US
MARKFOR
W9077Q
W8SW PA ARNG FMS 24
502 CAVALRY ROAD
CARLISLE PA 17013-1699
US
M/F: (TCN) W9077Q61880076
RDD: 555
PROJ: TP 2
SUPP ADD: W25KYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:07/10/2026
SPE7L7-26-T-4383 NSN/Part Number: 6130-01-418-5230 Quantity: 1 EA Purchase Request: 7017493812QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FThe contract specifies the procurement of a single audio frequency transformer with NSN 5950-00-827-7181 and part number 1279642-1, sourced from approved suppliers including Honeywell International Inc. Coast/Advanced Chip Magnetics Inc. and Precision Electronics Inc. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding standard ASTM D3951. Non-hazardous items must be commercially packaged per DLA guidelines, while hazardous materials require alignment with FED-STD-313 and TQ requirement IP025. All packaging and labeling must conform to MIL-STD-129, with palletization following RP001 specifications. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated Tinker AFB receiving facility, with a required delivery deadline of July 21, 2026. The contract is issued under solicitation SPE7M0-26-T-014Q, with point of contact Audrey Acuna, and falls under NAICS code 334416 for electronic component manufacturing, managed by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIREThe contract specifies the procurement of a fixed wire resistor identified by NSN 5905-01-282-2433 and part numbers 727010-611 and B1A-1.5KOHM3PCT, with a quantity of one unit to be delivered within five days under FOB origin terms. The item is classified as a commercial item and must comply with strict packaging and marking standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with additional requirements under IPC/JEDEC J-STD-609 to clearly identify lead content on each unit pack. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. The resistor must meet the latest revision of MIL-DTL-39032 for preservation and packaging. Delivery is mandated to be shipped via the fastest traceable means, explicitly prohibiting parcel post, and is directed to Robins Air Force Base, Georgia. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The contract references DLA packaging rules, government identification removal protocols, and specific marking directives, with all compliance obligations binding on the contractor regardless of supplier. The solicitation number is SPE7M0-26-T-014T, with a required delivery date of July 22, 2026, and primary contract oversight handled by the Department of Defense through the Maritime Supply Chain ESOc Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
ELECTRICAL DEVICES DIV

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, F5E
ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, METThis contract is for the procurement of three fixed metal capacitors with NSN 5910-01-608-3065 under solicitation SPE7M5-26-T-338H, issued by the Department of Defense’s Active Devices Division. The delivery is required within 20 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging codes, and unit packaging requirements per IPC/JEDEC J-STD-609 for lead and lead-free component identification. The items must be shipped to the USS George H W Bush CVN 77 at FPO AE 09513 with RDD 777 designation and must not contain mercury or mercury compounds unless explicitly exempted for functional uses such as batteries, instruments, or weapons systems controlled by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment. All packaging and marking must adhere to DLA packaging requirements and hazardous materials shipping guidelines as referenced in DLAD procedural notes. The contract includes strict government-only administrative codes and specifies the point of contact for inquiries along with the electronic procurement portal for reference to technical and quality standards incorporated by reference from the DLA Master List.
ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, WIRE
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
COIL, RADIO FREQUENC
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, W
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
COIL, RADIO FREQUENCYThe contract is for a single unit of a Radio Frequency Coil, identified by NSN 5950-01-086-5390 and part number MS21422-12, with a required delivery within five days of contract award. The product must comply with technical specifications referenced in MIL-PRF-15305F Sup 1 and MS21422D, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin to Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable shipping method, excluding parcel post. Strict prohibitions apply: mercury and mercury compounds must not be intentionally added or come into direct contact with the hardware except for permitted uses such as functional batteries, fluorescent lamps, sensors, weapon systems, or Navsea-specified reagents, and any portable mercury-containing devices must have shockproof construction and a secondary containment. The use of Class I ozone-depleting substances is strictly prohibited in any stage of design, manufacturing, or testing unless explicitly waived in writing by the contracting officer, and this restriction overrides any conflicting specification requirements. The purchase request number is 7017559789, with a required delivery date of July 22, 2026, and the contract is issued under solicitation SPE7M0-26-T-014K. All quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date if modified. Packaging includes unit containment D3, intermediate container quantity of 100, and packing code U, with the designated mark for the government being W25G1Q and the tracking code W25G1Q619800JT.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELE
ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
REACTOR
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 333992
New
DIBBS
CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.
Welding and Soldering Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.
Plate Work Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.
Books Printing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
DECONTAMINATING APPThis contract is for the procurement of one unit of a decontaminating apparatus identified by NSN 4230-01-593-2297 and part number T00416-5083, classified as a commercial item with a non-extendable shelf life of 12 months as a Type I (Code H) item. The item must comply with strict material restrictions including the absolute prohibition of asbestos per FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and certain chemical reagents defined by NAVSEA, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The item is designated as a critical application item and must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including the special marking code 32 for shelf life, with palletization adhering to DLA packaging requirements. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office at Building 1710, Iwakuni, Japan, under contract SPE8E6-26-T-3774, with the original required delivery date set for July 17, 2026. Compliance with DLA’s Master List of Technical and Quality Requirements, including specific references such as RP001, RQ011, RD003, and RC001, is mandatory, along with adherence to all documentation and source approval protocols. Transportation is governed by DLAD procedural notes C19 and C20, and all markings, packaging, and unit of issue must conform to specified DoD and ANSI X12 standards. The contract is managed under a federal procurement system with government-only access details and is part of a larger expeditionary system requirement supported by HDT Expeditionary Systems Inc.
Plate Work Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThis contract specifies the procurement of six calcium maintenance-free shelf-life Type I batteries with a non-extendable 12-month shelf life, supplied by East Penn Manufacturing Co. under part number 11U1L and NSN 6140017178541. The batteries must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking and palletization standards. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. Mercury or mercury-containing compounds are strictly prohibited except in functional applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents. The items will be delivered FOB destination within 20 days of contract award to Camp Pendleton, California, with no quantity variance allowed and inspection and acceptance also occurring at destination. Shipment must use traceable freight methods, not parcel post, and special marking codes are not required. The contract is issued under solicitation SPE7L7-26-T-4391 with a required delivery date of July 13, 2026, and response deadline August 3, 2026, under NAICS code 335910 and managed by the Defense Logistics Agency.
Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326211
New
DIBBS
INNER TUBE, PNEUMATIThis contract is for the procurement of four pneumatic inner tubes, part number 323111, with NSN 2610-01-611-7825, supplied by Carlisle Tire & Wheel Co under solicitation SPE7L7-26-T-4385. The item is classified as TYPE I with a non-extendable 60-month shelf life, and the use of any Class I ozone-depleting chemicals is strictly prohibited, requiring approved substitutes if necessary. Delivery is required within 20 days to Ellsworth Air Force Base, South Dakota, FOB destination, with inspection and acceptance occurring upon arrival and no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking indicating Type I shelf-life status, and palletization adhering to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with zero non-conformances required unless otherwise specified. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable technical and quality standards. Shipment must be sent via the fastest traceable means, excluding parcel post, and all documentation aligns with DoD unit of issue and procurement protocols. The original required delivery date is July 17, 2026, and the point of contact is Molly Teegarden of the Defense Logistics Agency.
Tire Manufacturing (except Retreading)

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335139
New
DIBBS
FLOODLIGHT, ELECTRICThe contract is for the procurement of 10 electric floodlights with NSN 6230-01-717-5158, sourced from BAYCO PRODUCTS INCORPORATED DBA 3GLY4 under part number NSR-2166R. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s mandatory packaging requirements, specifically RP001 and MIL-STD-129, superseding ASTM D3951 if applicable. Hazardous material handling follows FED-STD-313 and TQ requirement IP025 if applicable. Items must be shipped via traceable means, excluding parcel post, to the specified delivery point at 7105 NW 70th Ave, Johnston IA 50131-1824, with clear labeling per government directives including traceable markings and the designated military freight code. The product must meet all technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, referenced in the solicitation, and documentation requirements for source approval are integral to compliance. The solicitation number is SPE8E7-26-T-3368, with a response deadline of August 3, 2026, and the original required delivery date is July 17, 2026. Contract administration is managed by the Defense Logistics Agency, with Kelly Mitchell as the primary point of contact.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGEThe contract specifies the procurement of 6140-01-457-4206, a 12-volt wet-charged lead acid battery classified as corrosive by the Department of Transportation and shipped under the name "Battery, Wet, Filled with Acid." It is a Type I shelf-life item with a strict non-extendable 3-month shelf life, requiring packaging and marking in compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life designation. All shipments must adhere to DLA packaging requirements RP001 and hazardous materials packaging standard IP025, using only U.S. Department of Transportation-compliant 4G UN-certified fiberboard containers; commercial packaging is strictly prohibited. The contractor must ensure staff are trained and certified per Title 49 CFR for handling, marking, labeling, and documenting hazardous materials, and must include valid Safety Data Sheets confirming regulatory compliance. The product must not contain intentionally added mercury except for functional uses in batteries, and portable fluorescent lamps or instruments containing mercury must have shockproof design and secondary containment per NAVSEA standards. The contract mandates a Firm Fixed Price structure with zero tolerance for quantity variance, delivery within 60 days after award, and inspection and acceptance occurring at the destination. Three separate deliveries of two batteries each are required, shipped to distinct U.S. military addresses in Pennsylvania and Puerto Rico, with shipments traceable and never via parcel post. Each delivery has an associated RDD and project code with unique routing identifiers, and the batteries are sourced from East Penn Manufacturing Co. under part number 7T31. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels for attributes are fixed as VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes any non-compliant materials or packaging, enforcing full adherence to federal hazardous materials regulations and government-specific logistics protocols.
Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332913
New
DIBBS
HEATER, ANTI-ICINGThe contract is for the procurement of two anti-icing heaters with the NSN/Part Number 4540-01-470-0777, under solicitation SPE8E8-26-T-4774, issued by the Defense Logistics Agency on behalf of the Department of Defense. The item is subject to strict export control regulations under either ITAR or EAR, meaning any dissemination of associated technical data to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. Foreign national employees and U.S. subsidiaries are equally restricted under DFARS 252.225-7048. Access to the technical data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have been formally approved by DLA authorities. The delivery requirement is urgent, with a five-day ADO timeline, and the solicitation response deadline is August 3, 2026. The NAICS code 332913 identifies the industrial category, and the primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided. The contract emphasizes compliance with DLA packaging and export-control protocols, restricting distribution exclusively to pre-authorized entities. All bidders must meet the specified export-control qualifications to be considered eligible for award, and any failure to adhere to the technical data handling requirements will result in disqualification.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details