Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Battery Storage Unit Supply

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 44 military-spec battery storage units identified by NSN 6140-00-422-9216, requiring full compliance with all applicable packaging, labeling, and hazardous materials regulations to ensure safe handling and transport. The solicitation is a total small business set-aside under FAR 19.5, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 335910 indicating the industry classification for electric lighting and wiring equipment manufacturing. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, and all units must meet rigorous military standards for durability, safety, and performance under operational conditions. The contract was posted on August 9, 2026, with a firm response deadline of August 20, 2026, and is structured as a subcontract under the Department of Defense managed by DLA Dist San Joaquin. While no specific point of contact is listed, the opportunity is accessible through the DIBBS platform using the provided link. Participation requires strict adherence to federal procurement guidelines, including proper documentation, timely delivery, and full compliance with hazardous material handling protocols to support military logistics and readiness requirements.

General Info

44 military battery units for Tracy, CA, small business set-aside, DOD contract, hazardous material compliance required.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

335910 - Battery ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 44 military-spec battery storage units under NSN 6140-00-422-9216, compliant with packaging, labeling, and hazardous materials regulations.

Similar Contracts

Same NAICS industry code

Storage Battery Supply (NSN: 6140014977065)The contract is for the procurement and delivery of a single military-grade storage battery identified by NSN 6140014977065, requiring full compliance with Defense Logistics Agency technical specifications, packaging requirements, and hazardous materials handling standards. This is a subcontract under the NAICS code 335910, relating to battery manufacturing, and is managed by the Department of Defense through the Defense Logistics Agency. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. The place of performance is designated as FPO with ZIP code 09587, indicating delivery to a military postal address, potentially overseas or in a deployed operational environment. All deliverables must meet stringent military-grade criteria for performance, safety, and logistics compatibility in field conditions.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Nickel-Cadmium Battery Manufacturing and AssemblyThe contract requires the manufacture, assembly, and quality assurance of nickel-cadmium wet vented batteries in full compliance with MIL-PRF-81757D specifications. This includes end-to-end responsibility for sourcing all necessary components, controlling production processes, ensuring rigorous quality standards, and properly packaging and labeling each unit to meet military requirements. A critical constraint is the enforcement of a 60-month shelf-life, demanding strict adherence to material selection, manufacturing controls, and storage protocols to guarantee long-term performance and reliability. All work must be performed in accordance with defense-grade specifications, with final delivery expected at the designated place of performance in Tracy, California, ZIP 95304-5000. The solicitation is classified as a subcontract under NAICS code 335910, issued by the Department of Defense through DLA Dist San Joaquin. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026. While no set-aside designation or point of contact is provided, bidders must be prepared to demonstrate capability in meeting exacting military battery standards and possess the infrastructure to support full lifecycle compliance from initial production through shipment. Participation requires familiarity with defense contracting protocols and the ability to deliver certified, tested units that satisfy all technical and logistical demands outlined in the specification.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

Non-Rechargeable Lithium Battery Supply (NSN 6135-01-549-3350)

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4675

The contract specifies the procurement of 44 units of battery storage units under NSN 6140-00-422-9216, with a delivery requirement of 209 days after contract award. The solicitation is a total small business set-aside under NAICS code 335910, issued by the Defense Logistics Agency Dist San Joaquin, with performance located in Tracy, California, and a response deadline of August 20, 2026. All supplies must comply with the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers, and sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or authorized chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging, marking, and shipping of hazardous materials must adhere to IP025 standards, and all government identification must be removed from non-accepted supplies in accordance with RQ011. Hazardous communication requirements are enforced under RQ034.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4662

The contract solicitation SPE7L7-26-T-4662 issued by the Defense Logistics Agency requires the procurement of 319 units of storage batteries, identified by NSN 6140017272436, for delivery to Norfolk, Virginia, with a strict 20-day delivery window following award and an original required delivery date of July 29, 2026. Delivery is FOB Destination, with inspection and acceptance also occurring at the destination, and no quantity variance is permitted. The batteries must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including mandatory adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling and barcoding, with a U packaging code, D3 unit container, and E5 intermediate container. Preservation follows Method 10 (Clng/Dry: 1) and the item is designated as a TYPE I (CODE F) with a non-extendable 6-month shelf life, requiring specific environmental controls. Physical identification of bare items is required per RQ017, and government identification must not be removed from non-accepted supplies per RQ011. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with acceptance criteria imposing zero non-conformances for any sampled lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. The batteries must not contain intentional additions of mercury or mercury compounds except where functionally necessary in batteries, fluorescent lamps, sensors, weapon systems, or specified reagents, and any portable devices containing mercury must include a second containment barrier compliant with NAVSEA 5100-003D. Packaging and shipping of hazardous materials must adhere to IP025 requirements, and palletization must follow DLA’s RP001 guidelines. The contract includes compliance with numerous FAR and DFARS clauses covering equal opportunity, human trafficking prevention, employment eligibility verification, sustainable procurement, hazardous material safety data, cybersecurity safeguards, export controls, and prohibitions on covered defense telecommunications equipment. Offerors must hold a UEI and disclose socioeconomic status if claiming small business or other set-aside status, and must affirm

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

BATTERY, GEL CELL

Solicitation # SPE7L7-26-T-4659

A 12-volt gel cell battery is being solicited under contract number SPE7L7-26-T-4659 with a requirement for two units, identified by NSN 6140-01-518-8252. The batteries must meet Type I specifications and have a 12-month shelf life, with bidders required to clearly state the source and part number they are supplying. Delivery is expected within five days of award, and the place of performance is Joint Base Lewis McChord, Washington, with a zip code of 98433-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The contract falls under NAICS code 335910 and is managed by the Defense Logistics Agency under the Department of Defense. Primary point of contact for inquiries is Faith Isabel, reachable via phone at 614-616-4336 or email at faith.isabel@dla.mil. This is a federal procurement targeting qualified suppliers to fulfill an urgent military supply need.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-T-4661

The contract pertains to the procurement of one sealed lead acid battery, NSN 6140-01-604-9286, designated as 9/NPX-35 Type I, with a non-extendable shelf life of 12 months, and is subject to strict packaging, marking, and handling requirements. The battery must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the special marking code 32 indicating Type I shelf life. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise specified, and attributes are to be verified at stringent levels unless defined otherwise in referenced documents. The battery must be nonspillable, in accordance with 49 CFR § 173.159a, with terminals protected against short circuit and clearly labeled as “NONSPILLABLE” or “NONSPILLABLE BATTERY.” No mercury or mercury-containing compounds may be intentionally introduced except as permitted for functional use in batteries. The product is excepted from hazardous materials transport regulations under ADR/RID, IMDG, and IATA Special Provisions due to compliance with prescribed quantity limits and nonspillable design. Delivery is required within five days to FOB destination, with no variance allowed in quantity. The shipment must be transported by the fastest traceable means, not parcel post, and delivered to the vessel USS RONALD REAGAN CVN 76, FPO AP 96616. Palletization must follow DLA packaging requirements, and any battery exceeding 75 pounds must have die-cut holes for handle access. All packaging and marking must align with DLA standards, and the item is subject to the DLA Master List of Technical and Quality Requirements incorporated by reference. The contract number is SPE7L7-26-T-4661, with a required delivery date of August 4, 2026, and the prime point of contact for inquiries is Kurt Becka of the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4669

The contract pertains to the procurement of a lithium-ion battery storage unit with a Type I shelf life of 36 months, which is non-extendable, and requires compliance with stringent packaging, marking, and hazardous material handling standards. The item must be manufactured and packaged in accordance with MIL-STD-2073-1E and marked in compliance with MIL-STD-129, including a special marking code indicating the Type I shelf life. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and all attributes are assigned verification levels or AQLs per specified criteria. The battery must not contain intentionally added mercury or mercury compounds except in functional applications explicitly permitted by NAVSEA, and any portable devices containing mercury must include a secondary containment structure. Packaging, shipping, and transportation adhere to IP025 standards for hazardous materials and must meet DLA packaging requirements, with FOB destination delivery terms and a strict 20-day delivery window. The item, identified by NSN 6140-01-497-7065 and part number 6ES7-971-1AA00-0AA0, is to be delivered in a single unit to the USS SAN ANTONIO LPD 17 at FPO AE 09587, with the delivery deadline set for January 27, 2026. The contract specifies a fixed quantity with zero variance allowed, and inspection and acceptance occur at the destination. MSDS/PSDS documentation is mandatory under FED-STD-313, and the vendor must use the DLA-authorized unit of issue. Transportation logistics are governed by DLAD procedure notes C19 and C20, and the solicitation number is SPE7L7-26-T-4669, issued by the Defense Logistics Agency under NAICS code 335910. All technical and quality requirements referenced through R and I identifiers are incorporated from the DLA Master List, and revisions in effect on the solicitation or award date control compliance. The primary point of contact for coordination is Tiffany Merritt, and the contract is subject to defense information protection policies under RD003.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4668

This contract specifies the procurement of lithium batteries under solicitation SPE7L7-26-T-4668, with a requirement for 126 units delivered FOB destination within 381 days from the contract date. The batteries are classified as Type I with a non-extendable shelf life of 60 months and must comply with stringent technical, packaging, and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at specified levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 indicating Type I shelf life status. Palletization and shipping must adhere to DLA packaging requirements and hazardous materials protocols, with strict prohibitions on intentional mercury addition except for functional uses in batteries, fluorescent lamps, and specified instruments, which must include a secondary containment boundary per NAVSEA 5100-003D. The item is to be shipped to DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at destination, and the unit of issue is ea with a total contract value of $126.00 per unit. The supplier is PROTECHNOLOGIES, INC with part number PT01739 and NSN 6140016970347.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4658

This contract pertains to the procurement of two Type I lead acid, wet-charged batteries with a non-extendable six-month shelf life, identified by NSN 6140-01-457-2615 and part number S56 from STRYTEN ENERGY LLC. Delivery is required within five days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The batteries must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, including the special marking code 32 indicating Type I shelf life status. Packaging and palletization must meet DLA’s procurement requirements and the latest ICAO technical standards for hazardous materials transportation. The items are subject to zero-defect sampling under MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercenary compounds are prohibited unless functionally essential as in the battery itself, and all mercury-containing components must be shock-proof with secondary containment. The contract incorporates technical and quality requirements from the DLA Master List and enforces hazardous communication standards under federal guidelines. All supplies must be free of government identification and conform to DoD unit-of-issue specifications.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

BATTERY, NONRECHARGE

Solicitation # SPE7L7-26-T-4674

This contract specifies the procurement of nonrechargeable lithium batteries under NSN 6135-01-549-3350, identified as a commercial off-the-shelf item with a Type II shelf life of 60 months, extendable as permitted by regulations. The batteries must comply with strict technical, quality, and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements, with special marking indicating Type II shelf life. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with specific verification levels or AQLs. The product must adhere to hazardous material handling protocols under IP025 and the Hazardous Communication Standard, with explicit prohibition against intentional mercury contamination except in functional applications like batteries, where secondary containment and shockproof design are mandated per NAVSEA 5100-003D. Delivery is FOB destination with no tolerance for quantity variance, requiring shipment by February 2, 2027, for arrival within 165 days, to the designated receiving warehouse in Tracy, California. The contract is a total small business set-aside under NAICS 335910, with performance obligations governed by the DLA Master List of Technical and Quality Requirements and applicable procurement notices, under solicitation SPE7L7-26-T-4674.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L7-26-T-4672

The contract pertains to the procurement of nickel-cadmium, wet, discharged, vented batteries specified under NSN 6140011103855, with a Type II shelf life of 60 months, extendable, and requiring strict compliance with MIL-PRF-81757D and associated technical documentation revisions. All components must originate from sources listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and no deviations are permitted without formal engineering change proposals or variance requests. The batteries must undergo production lot testing conducted at a government facility, with samples excluded from the contract quantity and requiring final approval from the qualifying activity prior to shipment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special labeling indicating Type II shelf life, and palletization must follow DLA packaging requirements. Hazardous material handling is strictly regulated: Safety Data Sheets and OSHA-compliant Hazard Communication Standard labels must be submitted and approved prior to award, and employee training on these requirements is mandatory. The use of mercury or mercury-containing compounds is prohibited except for specific functional applications in batteries, instruments, or sensors, which must include a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB destination within 76 days, with a firm quantity of ten units and zero variance allowed. The contract includes an additional line item for production lot testing, and all supplies must meet the ISO 9001 standard in effect on the contract date. The delivery address and shipping instructions are specified under DLA San Joaquin, with transportation governed by DLA procedural notes C19 and C20.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Supply Chain Compliance & Regulatory ReportingThe contract titled Supply Chain Compliance & Regulatory Reporting is a subcontract issued by the Department of Defense through DLA DIST SAN JOAQUIN, with a place of performance in Tracy, California, zip code 95304-5000. It is aimed at supporting critical regulatory obligations related to the defense supply chain, including the mandatory disclosure of covered defense telecommunications equipment, identification and management of foreign providers, and accurate upkeep of UEI and CAGE codes. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 541611, indicating management, scientific, and technical consulting services. The requirement emphasizes strict adherence to federal compliance standards essential for national security and supply chain integrity, though no set-aside designation or point of contact details are provided. Interested parties must respond via the provided DIBBS link before the deadline.

Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Packaging & Marking ServicesThe contract requires preservation packaging and marking of piston-valve assemblies in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring proper moisture protection and adherence to MIL-STD-129 for labeling requirements. The work must meet rigorous military specifications for long-term storage and transportation readiness, with all packaging processes designed to safeguard the assemblies from environmental degradation and ensure traceability through standardized markings. This subcontract is issued under NAICS code 561910 by DLA Dist San Joaquin under the Department of Defense and is performance-based at Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by August 20, 2026, following the solicitation posted on August 9, 2026, and the work is intended to support defense logistics operations requiring certified military-grade packaging solutions.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract requires the identification and documentation of hazardous materials contained in delivered items, with a focus on ensuring full compliance with OSHA regulations. This includes the accurate preparation of Safety Data Sheets for each hazardous substance and the application of standardized hazard labeling that meets federal safety standards. The work demands precision in material analysis, thorough recordkeeping, and strict adherence to regulatory requirements to support safe handling, storage, and transportation of hazardous goods within the supply chain. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance required at a facility in Tracy, California, zip code 95304-5000. It was posted on August 9, 2026, and responses must be submitted by August 20, 2026. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering compliant hazardous materials documentation and labeling services. The procurement is conducted through the DIBBS platform, and all technical and regulatory obligations must be fulfilled to meet Department of Defense safety and compliance expectations.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Precision Machined Valve Piston ManufacturingThe contract entails the manufacture of a high-integrity piston-valve assembly designed to meet Navy Critical Safety Item standards, demanding strict adherence to military specifications and rigorous quality controls. Production must include full material traceability, lot and serial number control, and documented compliance throughout all manufacturing stages to ensure safety, reliability, and performance under extreme operational conditions. The work is classified as a subcontract under NAICS code 332999, with performance designated to occur at Tracy, California, 95304-5000, under the oversight of DLA Dist San Joaquin, a Department of Defense entity. All deliverables must align with defense-grade requirements for critical systems, where failure is not an option. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, leaving a limited window for qualified vendors to submit proposals. No set-aside preferences or organizational type restrictions are specified, indicating an open competition among eligible subcontractors capable of meeting the stringent technical and compliance benchmarks. While no point of contact is listed, the official bid portal is accessible via the provided DIBBS link, where complete technical data, drawings, and regulatory requirements must be reviewed prior to submission. Success requires not only precision machining capability but also proven experience in defense-related components with full documentation and audit readiness.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Marking and Labeling ServicesThe contract requires the application of continuous, legible, and durable identification markings in strict accordance with MIL-STD-129R standards, ensuring all items are properly labeled with the NSN, alloy composition, temper designation, and lot number. This work falls under a Total Small Business Set-Aside as defined by FAR 19.5 and is classified under NAICS code 561910, indicating it is an administrative and support services subcontract focused on specialized labeling and marking services. The performance location is designated as Tracy, California, with a zip code of 95304-5000, and the contracting entity is DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and interested parties must submit through the DIBBS platform using the provided link, ensuring full compliance with military-grade marking specifications and timelines.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging, preservation, and palletization services strictly aligned with MIL-STD-2073-1E and ASTM B660-23 standards, including the application of preservation code ZZ to ensure military-grade protection of equipment and materials. All work must meet rigorous defense specifications for environmental resistance, durability, and long-term storage readiness, with strict adherence to prescribed methods for corrosion inhibition, moisture control, and secure containerization. The services are to be performed at the designated place of performance in Tracy, California, with precise compliance expected in every phase of the operation. This is a small business set-aside subcontract under NAICS code 561910, managed by the Department of Defense through DLA Dist San Joaquin, and is exclusively available to small business concerns as defined by the SBA. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with all submissions required through the DIBBS platform. While no specific point of contact is listed, bidders must ensure full alignment with federal procurement regulations and deliverables consistent with defense logistics standards.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Metal Certification and Quality Documentation ServicesThis contract requires the provision of Certificate of Quality Compliance, also known as Mill or Material Certification, for every shipment to ensure full traceability and strict adherence to Department of Defense Logistics Agency and ASTM standards. The focus is on delivering accurate, verifiable documentation that confirms material specifications and regulatory compliance with each delivery. The solicitation, titled Metal Certification and Quality Documentation Services, is designated as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility to small businesses as defined by NAICS code 541380. Performance is required at Tracy, California, with a zip code of 95304-5000, and the response deadline is set for August 20, 2026. The contract is issued under the Department of Defense through DLA Dist San Joaquin, emphasizing the critical nature of documentation integrity in defense supply chain operations.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

High Magnesium Aluminum Alloy Plate ManufacturingThe contract calls for the manufacture and supply of high magnesium aluminum alloy plates that must comply with ASTM B928/B928M-15 and applicable military specifications, ensuring precise dimensional accuracy and complete material traceability from production through delivery. The products are intended for defense-related applications requiring stringent quality control and documented provenance, with all materials subject to rigorous testing and certification requirements. The work is designated as a Total Small Business Set-Aside under SBA rules, restricting eligibility solely to small businesses as defined by the Small Business Administration. The solicitation, issued by the DLA Dist San Joaquin under the Department of Defense, has a response deadline of August 20, 2026, and is classified as a subcontract. The North American Industry Classification System code is 331314, indicating this pertains to aluminum rolling, drawing, and extruding. Performance of the contract will occur at Tracy, California, with a zip code of 95304-5000. Interested parties must submit proposals through the DIBBS system at the provided web link prior to the deadline to be considered for award.

Secondary Smelting and Alloying of Aluminum

POSTED

about 8 hours ago

DEADLINE

Domestic and International Freight LogisticsThe contract covers domestic and international freight logistics management for the transportation of goods from origin to destination, with full responsibility for orchestrating the movement, documentation, and compliance requirements associated with ocean freight. Key obligations include the preparation and management of ocean bills of lading and strict adherence to DLAD C19/C20 regulatory standards, ensuring all shipments meet Department of Defense procedural and reporting mandates. The work is centered around logistics operations originating from or transiting through Tracy, California, with a zip code of 95304-5000 serving as the designated place of performance. This is a subcontract opportunity under NAICS code 483111, classified under the Department of Defense through DLA Dist San Joaquin, with a submission deadline of August 20, 2026. The solicitation was posted on August 9, 2026, and potential vendors must be prepared to demonstrate capability in handling complex international freight operations under stringent defense logistics protocols. Compliance with DLAD C19/C20 requirements is mandatory, emphasizing traceability, documentation integrity, and regulatory alignment throughout the supply chain. All parties must be equipped to support end-to-end logistics coordination including ocean shipping, documentation accuracy, and defense-specific compliance frameworks.

Deep Sea Freight Transportation

POSTED

about 8 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires provision of packaging, labeling, and kitting services for commercial items intended for delivery to the Defense Logistics Agency, with strict adherence to military marking and packaging standards to ensure operational readiness and compatibility with DoD logistics systems. All services must meet federal and military specifications, including proper identification, barcoding, and containment protocols, to facilitate accurate tracking and handling throughout the defense supply chain. The work is to be performed at a designated location in Tracy, California, with a zip code of 95304-5000, and must comply with all regulatory requirements applicable to defense-related packaging operations. This subcontract, classified under NAICS code 561910, was posted on August 9, 2026, and responses are due by August 20, 2026, with the contracting activity administered by DLA Dist San Joaquin under the Department of Defense. While no specific set-aside provisions are outlined, the requirement is structured as a subcontract opportunity within the broader DLA supply chain framework. Interested parties must ensure full compliance with military packaging directives and be prepared to demonstrate the capability to deliver consistent, audit-ready packaging solutions for sensitive defense logistics operations.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Commercial Fan Supply and PackagingThe contract pertains to the procurement, packaging, labeling, and shipment of circulating fans that must fully comply with U.S. military logistics standards and Defense Logistics Agency requirements. The work is to be performed at a specified location in Tracy, California, with the zip code 95304-5000, and the NAICS code 335312 identifies the industry as manufacturing household and commercial fans. This is a subcontract opportunity issued by DLA Dist San Joaquin under the Department of Defense, and all delivered items must meet stringent military-grade specifications for durability, labeling, and documentation to ensure seamless integration into the federal supply chain. The response deadline for submissions is August 20, 2026, and the solicitation is accessible through the DIBBS portal. Packaging and labeling must adhere to exact military directives to support storage, handling, and transportation within DoD logistics networks, and all units must be traceable and properly documented to comply with DLA inventory and accountability systems. Suppliers are expected to demonstrate capacity to meet volume requirements, maintain quality control throughout production, and deliver on schedule without disruption. While no set-aside classification is specified, bidders must be prepared to provide full compliance documentation, including certifications of origin, material safety, and conformance testing, to be considered for award. The contract does not include solicitation number details publicly visible, but the official link to the solicitation is accessible via the DIBBS platform.

Motor and Generator Manufacturing

POSTED

about 8 hours ago

DEADLINE

Small Business or Socioeconomic Prime Subcontracting OpportunityA subcontracting opportunity is available for small or socioeconomically certified businesses to support a prime contractor in the defense metal supply chain. The opportunity, posted on August 9, 2026, requires responses by August 20, 2026, and is classified under NAICS code 331492, which pertains to other nonferrous metal casting and related activities. The prime contractor is working under the Department of Defense through DLA DIST SAN JOAQUIN, with work expected to be performed at a location in Tracy, California, zip code 95304-5000. This subcontracting effort is designed to leverage the capabilities of small or certified businesses to ensure the integrity and efficiency of critical defense material sourcing, though no specific set-aside designation is indicated. Interested parties must access the opportunity through the official DIBBS platform using the provided link to obtain full details and submit proposals.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 8 hours ago

DEADLINE