This Solicitation opportunity from Department Of Defense was posted on April 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BEARING, BALL, ANNULA

Closed

SPE4A6-26-T-23V6Federal

Submission Closed04/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A6-26-T-26NV

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 263 sleeve bushings under part number 3120-00-242-8431. The contract requires delivery within 64 days after receipt of order and is associated with solicitation number SPE4A6-26-T-26NV. Performance is to take place at Robins Air Force Base. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific training to access the data. Item Unique Identification is not required for this order.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-75B7

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Breech Cap Assembly (NSN 1095-00-878-4911)

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 2940-00-678-5357)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Annular Ball Bearings (NSN 3110-00-921-3356)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,THRUST

Solicitation # SPE4A6-26-T-28QU

The Department of Defense, through the ASC Commodities Division of DLA Aviation, has issued Request for Quotation SPE4A6-26-T-28QU for the procurement of 149 thrust ball bearings under NSN 3110001590943. This is a fixed-price contract with a delivery requirement of 263 days after award, with the items to be delivered to the DLA Distribution Depot Oklahoma. The solicitation is open for electronic submissions via the DIBBS system until September 18, 2026. This procurement is designated as an Air Force Critical Safety Item and carries strict domestic sourcing requirements; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada. Additionally, offers utilizing additive manufacturing processes are ineligible for award. Quality compliance is mandatory, requiring manufacturers to adhere to SAE AS9100 or an equivalent standard, while dealers and distributors must comply with AS9120. The contract specifies inspection and acceptance at the point of origin and utilizes the First Destination Transportation program. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. All payment requests and receiving reports must be processed through the Wide Area WorkFlow system. The procurement falls under NAICS code 332991 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act and the safeguarding of covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28RJ

Solicitation SPE4A6-26-T-28RJ is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 34 sleeve bushings (NSN 3120011153346). The procurement falls under NAICS code 332991 and requires quotes to be submitted electronically via the DIBBS portal by September 18, 2026. The approved source for this item is 62983 393102. Delivery is required within 170 days after order, with a need ship date of March 8, 2027, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging must adhere to MIL-STD-2073-1E, with each sleeve wrapped in neutral paper to prevent damage, and marking must follow MIL-STD-129. Inspection and acceptance will occur at the point of origin. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment. The procurement is managed by Buyer Shalonda Davis.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

31--BEARING,BALL,ANNULAR

Solicitation # SPE4A6-26-Q-1426

Solicitation SPE4A6-26-Q-1426 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 527,000 annular ball bearings (NSN 3110-00-921-3356). This is a source-controlled drawing item requiring conformance to Basic Drawing 73030 541956, Revision D, and Reference QAP 13873 QAP-B02, Revision B. The items are to be delivered to DLA Distribution Cherry Point within 268 days after receipt of the order. The procurement is set aside for small businesses, and quotes are due by September 18, 2026. The government will award the contract based on best value, utilizing a trade-off process that weighs cost or price approximately equal to non-price factors. Past performance, specifically SPRS assessments and historical delivery schedule compliance, is identified as a significant evaluation factor. Technical requirements include CMMC Level 2 certification and adherence to specific ball and roller bearing acquisition restrictions. Packaging and marking must comply with MIL-STD-2073-IE and MIL-STD-129, with inspection and acceptance occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FY27-2A Foreign Bearings Waiver Package Sources Sought Notice

Solicitation # FY27-2AForeignBearingsWaiverPkgSourcesSoughtforDomesticBearings

The Department of Defense, through DLA Aviation, has issued a sources sought notice to identify viable domestic sourcing for several specific National Stock Numbers (NSNs) currently determined to be foreign manufactured. This effort is conducted in accordance with DFARS 225.7009 and DFARS 252.225-7016 to ensure compliance with domestic sourcing regulations for the listed bearing components. Interested parties should note that the government may not possess or have the authority to distribute all associated technical data, though current procurement item descriptions can be provided upon request. All standard requirements for source approval, configuration control, and part numbering apply. Responses are due by September 24, 2026, under NAICS code 332991.

POSTED

DEADLINE

Manufacture of Flexible Connections (NIIN 011445976)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Fluid Filter Element (NSN 2910-01-723-5011)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Precision Bearings (MS21151-10)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract calls for the procurement of 148 units of ball annular bearings, specifically part number 3110-01-576-0236, with delivery expected within 79 days FOB origin to Tinker Air Force Base. The bearings must meet stringent technical and quality standards as outlined in multiple referenced military specifications and quality assurance plans. Special attention is given to packaging, preservation, and marking requirements in accordance with MIL-DTL-197M and MIL-STD-129, ensuring protection and identification of the bearings during shipping and handling. The contract also incorporates cybersecurity and quality control measures, including a CMMC Level 2 self-assessment and tailored higher-level contract quality requirements. A critical aspect of the contract is the restriction on the acquisition of ball and roller bearings, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the component costs originating from these regions. Contractors must provide a declaration confirming the domestic or foreign origin of the materials, and failure to do so may result in disqualification of offers. In cases where no bearings meet this sourcing requirement, the solicitation may be canceled or held pending a waiver. This contract is issued by the Department of Defense's ASC Commodities Division, emphasizing compliance with defense-related procurement policies and sourcing restrictions.

General Info

Procure 148 US-made ball bearings meeting military specs, delivered in 79 days to Tinker AFB.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-23V6.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 15

Combined Synopsis

Type ChangedApr 15

Combined Synopsis → Solicitation

Response DeadlineApr 23

Deadline has passed

Submission Closed

04/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Kameron Heningburg

contact@example.gov

+1 (555) 000-0000

Full Description

BEARING,BALL,ANNULA
BEARING,BALL,ANNULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
IDENTIFY TO:
BEARING RESTRICTION:
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A6-26-T-23V6
SECTION B
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 59364 P/N 3235897-1
IAW REFERENCE QAP 13873 QAP-B02
REVISION NR B DTD 12/11/2013
PART PIECE NUMBER:
IAW REFERENCE QAP 77445 MQR-PSD-1
REVISION NR 2 DTD 10/29/2019
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016335883 0001 EA 148.000
NSN/MATERIAL:3110015760236
DELIVERY (IN DAYS):0079
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ADDITIONAL INFORMATION: PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
SPE4A6-26-T-23V6
SECTION B
PR: 7016335883 PRLI: 0001 CONT’D
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS
OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE
TO THE QUALITY ASSURANCE VERIFICATION
REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF
MIL-DTL-197M.
...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-576-0236 Quantity: 148 EA Purchase Request: 7016335883QTY: 148 Delivery: 79 days ADO