Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEARING, BALL, ANNULAR

Active
SPE4A6-26-T-10GEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a ball annular bearing with part number AA59585-206JACT and NSN 3110001448923, for a quantity of 97 units at a unit price of $97.00, totaling $9,409.00. Delivery is required within 98 days FOB origin, with full inspection and acceptance also occurring at origin. The bearing is classified as a critical application item and must comply with Technical Data Package Revision C General 3 as referenced in CID A-A-59585C and QAP-13873 Rev B. Packaging and preservation must adhere strictly to MIL-STD-2073-1E and MIL-DTL-197M, including specific preservation methods based on bearing type and closure, protective lubricant selection, and quality assurance verification of the contractor’s packaging facility. Marking requirements follow MIL-STD-129 with special handling codes, and palletization must meet DLA packaging standards. The contract imposes a strict domestic sourcing restriction under DFARS 252.225-7016, mandating that the bearing be manufactured in the United States, its outlying areas, or Canada, with more than 50% of the cost of all bearing components originating from these regions. A contractor declaration affirming compliance with this restriction is mandatory and must be submitted upon request; failure to provide it will disqualify the offer. No mercury or mercury-containing compounds may be intentionally added to the bearing except as explicitly permitted for certain functional components under NAVSEA 5100-003D, with additional containment requirements for portable fluorescent lamps or instruments containing mercury. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, and covered defense information provisions apply. The solicitation may be canceled or held pending a waiver if no compliant offerings are received. The procurement is administered by the Department of Defense’s ASC Commodities Division with a response deadline of August 6, 2026, and point of contact listed as Charleen Weber.

General Info

97 ball annular bearings, US/Canada sourced, CMMC Level 2, MIL-STD compliant, delivery in 98 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

1968 GILBERT ST BLDG W143 DWY 17, NORFOLK, VA, 23511-0001, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHARLEEN WEBER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING, BALL, ANNULAR
BEARING, BALL, ANNULAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RT001: MEASURING AND TEST EQUIPMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
P/N: AA59585-206JACT IDENTIFY TO: BEARING RESTRICTION:
RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING
MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR
EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING
ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE
UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE
TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE
DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER
BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL
BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT
https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL
SPE4A6-26-T-10GE
SECTION B
REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED
WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE
RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS
225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC CID A-A-59585C NOT 4 REVISION NR C DTD 08/22/2024 PART PIECE NUMBER: AA59585-206JACT
TDP Rev C Gen 3 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015212803 0001 EA 97.000
NSN/MATERIAL:3110001448923
DELIVERY (IN DAYS):0098
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE4A6-26-T-10GE
SECTION B
PR: 7015212803 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ADDITIONAL INFORMATION:
PRESERVATION, PACKAGING, PACKING, AND MARKING
REQUIREMENTS SHALL BE IN ACCORDANCE WITH
MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY
BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT
PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR
PRESERVATIVE COMPOUND SHALL BE DETERMINED
DEPENDENT UPON BEARING TYPE AND CLOSURE IN
ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.
FOR PRESERVATION PROCESS CONTROLS, DEPENDANT
UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)>
PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS
OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE
TO THE QUALITY ASSURANCE VERIFICATION
REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF
MIL-DTL-197M.
...END OF SPECIAL PACKAGING NSN/Part Number: 3110-00-144-8923 Quantity: 97 EA Purchase Request: 7015212803QTY: 97 Delivery: 98 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-Q-1230
This contract specifies the procurement of 4 units of a bearing washer thrust with NSN 3120-00-071-7923 under solicitation SPE4A6-26-Q-1230, requiring delivery within 179 days after award. The item is a configuration control item previously identified by Warren Pumps Inc and Circor Naval Solutions LLC under part number 679E0017C041A, subject to strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The supply must comply with MIL-STD-130N for item identification and MIL-STD-2073-1E for packaging, including preservation method 33, drying, packaging material 49, and wrapping material GB. All packaging and marking must adhere to MIL-STD-129 with no special marking codes, and palletization must follow DLA’s RP001 packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in preservation, packaging, and marking, except for approved functional applications outlined in NAVSEA 5100-003D, which require secondary containment and shockproof design. The delivery point is the destination, with inspection and acceptance occurring there, and the FOB point is origin. The government-provided parcel post and freight shipping address is DLA Distribution San Joaquin in Tracy, California, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The required delivery date is March 21, 2027, tied to purchase request 7015212691. Contracts for this item follow precise DLA unit of issue standards and apply zero tolerance for quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-10GS
The contract pertains to the procurement of 58 bearing sleeves with NSN 3120-01-516-9336 under solicitation SPE4A6-26-T-10GS, with a response deadline of August 6, 2026, and delivery required within 120 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment specifies a later revision. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item involves technical data subject to export controls under either ITAR or EAR, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and formal DLA approval. The place of performance is Tracy, California, with a NAICS code of 332991, and the contracting office is under the Department of Defense’s ASC Commodities Division, with Chanee Yarborough listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-10FV
The item specified is a BUSHING, SLEEVE with NSN 3120-01-448-2625, requiring a quantity of 10 units to be delivered within 10 days of award. The solicitation, identified as SPE4A6-26-T-10FV, was posted on July 29, 2026, with responses due by August 6, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA specifications, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request, under DFARS 252.211-7003(c)(1)(i). Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and official DLA approval. The NAICS code is 332991, and the point of contact for inquiries is Tracy Fletcher, reachable via email and phone.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-10GW
The contract is for the procurement of 83 units of BUSHING, SLEEVE with NSN 3120-01-418-2947 under solicitation SPE4A6-26-T-10GW, issued by the Defense Logistics Agency’s ASC Commodities Division under the Department of Defense. Delivery is required within 95 days after award, with a response deadline of August 6, 2026, and the solicitation was posted on July 29, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA training and questionnaire and received explicit approval from DLA may access the controlled technical data. The place of performance is New Cumberland, PA, 17070-5002, and primary point of contact is Katelyn Williams with the provided email and phone number.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, NEED
Solicitation # SPE4A6-26-T-10HK
This contract solicits 1,065 roller needle bearings under NSN 3110-00-157-0531, with a delivery requirement of 85 days FOB origin and no variance allowed in quantity. The bearings must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of components—rolling elements, retainer, inner race, or outer race—originating from these regions. Contractors must submit a signed declaration verifying the domestic or foreign origin of materials, failure to provide which may disqualify their quote. The item is classified as a critical application requiring compliance with MIL-DTL-197M for preservation and packaging, including specific lubricant selection based on bearing type and closure, and adherence to quality assurance verification procedures. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with palletization meeting DLA packaging requirements and no mercury or mercury compounds intentionally added except in listed exempted applications. Inspection and acceptance occur at origin, and physical marking must comply with RQ017 standards. Technical and quality requirements are dictated by the DLA Master List, with tailored higher-level quality requirements and measuring equipment standards also applying. Item Unique Identification is not required per customer request. The contract is issued under solicitation SPE4A6-26-T-10HK, with a response deadline of August 6, 2026, and is managed by the Defense Logistics Agency’s Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD EN
Solicitation # SPE4A6-26-Q-1231
The item specified is a plain rod-end bearing with NSN/Part Number 3120-01-057-2830, with a quantity of 57 units to be delivered within 168 days after order. The solicitation, issued by the Defense Logistics Agency under contract number SPE4A6-26-Q-1231, requires compliance with stringent cybersecurity and export control protocols. All technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transmission to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approved the export-controlled data questionnaire, are authorized to access such data. Additionally, the contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring adherence to cybersecurity maturity standards for handling covered defense information. The purchase request number is 7017369207, with the solicitation posted on July 29, 2026, and responses due by August 12, 2026. Primary point of contact is Jessica Jones of the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRICAL
Solicitation # SPE4A6-26-Q-1163
The contract calls for the procurement of 200 cylindrical roller bearings identified by NSN 3110-00-838-7064, with a firm fixed price and zero variance in quantity. Delivery is required within 703 days after order issuance, with inspection and acceptance occurring at origin. The bearings must be manufactured in the United States, its outlying areas, or Canada, and the cost of components—rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50% of the total bearing component cost, as mandated by DFARS 252.225-7016. A contractor declaration regarding the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide it will disqualify the quotation. Only approved sources, specifically Roller Bearing Company of America Inc. DBA West Trenton Div (CAGE 51588, P/N ESJ74590-9D) and RBC Bearings Incorporated (P/N 114R2131-1), are eligible. The item is designated as critical application and must comply with detailed technical, packaging, and quality requirements referenced from the DLA Master List, MIL-STD-2073-1E, and MIL-DTL-197M, including specific preservation, packing, and marking protocols. Packaging must follow DLA standards and MIL-STD-129 for labeling, with palletization adhering to RP001 requirements. Measurement and test equipment must be calibrated and documented, and the first article was tested and approved by the contractor. Unit of issue is each, and item unique identification is not required per service customer direction. The solicitation may be canceled or held pending a waiver if no compliant offers are received.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
Federal
31--BEARING,ROLLER,CYLI
Solicitation # SPE4A626T10GG
The contract solicitation seeks quotes for 31 bearing rollers, cylindrical, NSN 3110010099824, with a total of 31 units required—30 units to be delivered to the DLA Distribution Depot in Oklahoma within 557 days after award, and one additional unit to be delivered within 240 days after award. All responsible sources are invited to submit electronic quotes, which will be considered if received by the deadline. The solicitation number is SPE4A66T10GG, published on July 29, 2026, with responses due by August 6, 2026. The North American Industry Classification System code is 332991, indicating it falls under other fabricated metal product manufacturing. The procurement is managed by the DLA Aviation office under the Department of Defense, with the contracting office located in Richmond, Virginia. All questions regarding the solicitation must be directed via email to the designated point of contact, and further details can be accessed through the SAM.gov link provided or by searching the solicitation number on the DIBBS website.
DLA Aviation

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
Federal
BEARING,JOURNAL
Solicitation # N0010426QTB84
This solicitation, numbered N0010426QTB84, seeks repair services for the BEARING,JOURNAL under a firm-fixed-price structure, with a required Repair Turnaround Time of 230 days. All repairs must comply with technical specifications tied to CAGE codes 0BR59 and 830R7 and reference number 818D772PC1, performed in accordance with the contractor’s approved manuals, drawings, and government directives. The item must be marked per MIL-STD-130 Rev K, and any changes to design, material, or part number require prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific change codes. Government Source Inspection is mandatory, and all work must be documented with records retained for 365 days after final delivery. Freight is FOB Origin, with the Navy managing logistics. The contractor must provide unit and total pricing, RTAT, and compare repair cost to new unit price and lead time, with an optional quantity increase available under FAR 52.217-6. Cybersecurity maturity certification, small business subcontracting plan, and use of Workflow Pro are required. Delivery must meet the 230-day RTAT to be considered; alternatives must be clearly justified. The award will be issued to a qualified vendor with a valid CAGE code, and performance locations must be designated.
Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332991
New
DIBBS
Thrust Washer (Bearing, Washer, Thrust) Manufacturing and Supply
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Precision Ball Bearing Manufacturing (Annular Type)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

in 14 days
View Details