Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING BALL

Active
SPE4A6-26-T-15GCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 37 pairs of bearing balls under solicitation SPE4A6-26-T-15GC for the Department of Defense ASC Commodities Division. The items are identified by NSN 3130-01-625-0562 and are classified as critical application items, with approved part numbers from SKF USA Inc, Northrop Grumman Systems Corporation, and Jamaica Bearings Co. Delivery is required within 171 days, with a need ship date of February 7, 2027, and a final required delivery date of July 18, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. The contract also incorporates requirements for covered defense information, source approval documentation, and the removal of government identification from any non-accepted supplies.

General Info

DoD procurement of 37 bearing balls for delivery by July 18, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-15GC.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Stuart Dowdy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING BALL
BEARING BALL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IDENTIFY TO:
CRITICAL APPLICATION ITEM
SKF USA INC. 52676 P/N 7308BECBM
NORTHROP GRUMMAN SYSTEMS CORPORATION 90099 P/N 759J040PC149
JAMAICA BEARINGS CO., INC. 04836 P/N 7308BECBM
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-15GC
SECTION B
PR: 7017838157 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017838157 0001 PR 37.000
NSN/MATERIAL:3130016250562
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/07/2027 Original Required Delivery Date:07/18/2027
SPE4A6-26-T-15GC NSN/Part Number: 3130-01-625-0562 Quantity: 37 PR Purchase Request: 7017838157QTY: 37 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-15EQ
This contract is for the procurement of eight thrust washer bearings, identified by NSN 3120013980360 and part number 04104007 from Flowserve US Inc. The agreement specifies a delivery timeframe of 171 days with a required ship date of February 7, 2027, and an original required delivery date of January 3, 2028. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the origin. The contract adheres to strict technical and quality standards, including DLA packaging requirements and MIL-STD-129 marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLI
Solicitation # SPE4A5-26-Q-0679
This contract is a solicitation for the procurement of 20 cylindrical roller bearings, identified as NSN 3110-01-731-9490 and Sikorsky Aircraft Corporation part number SB2197-101. The items are designated as Navy Critical Safety Items and Critical Application Items, requiring strict adherence to quality and technical standards. The agreement is based on a Firm Fixed Price with a delivery timeline of 154 days after order. Inspection and acceptance will occur at the point of origin. The contractor must comply with several DLA technical and quality requirements, including SAE AS9100 for manufacturers and specific packaging and marking standards under MIL-STD-129 and MIL-DTL-197M. Special sampling plans from Sikorsky Corporation are acceptable provided they meet ASQ H1331 or MIL-STD-1916 standards. All requests for waivers or deviations must be approved by the DSC Contracting Officer, and specific preservation methods must be applied based on the bearing type and size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
CONE AND ROLLERS, TAPER
Solicitation # SPE4A6-26-T-15BF
This contract is a solicitation for the procurement of 19 tapered roller bearing cones and rollers, identified by NSN 3110-01-690-9765 and part number 1228-Q-1577. The delivery timeline is set for 171 days after order, with shipping terms as FOB Origin and inspection and acceptance occurring at the destination. A critical requirement of this agreement is the restriction on the acquisition of ball and roller bearings, mandating that the items be manufactured in the United States, its outlying areas, or Canada. Additionally, the cost of components manufactured in these regions must exceed 50 percent of the total component cost, and contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must strictly adhere to MIL-DTL-197M and DLA packaging requirements.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
HOUSING, BEARING UNIT
Solicitation # SPE4A6-26-T-14XW
This contract is for the procurement of one bearing unit housing, identified by NSN 3130010998668 and part number 16601207 from Fairbanks Morse, LLC. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds. The delivery is set for 171 days after order, with a required delivery date of August 8, 2027, and a need ship date of February 7, 2027. The contract specifies that inspection and acceptance will occur at the point of origin, with shipping destined for DLA Distribution San Joaquin in Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additionally, the contract incorporates standards for configuration change management and the removal of government identification from non-accepted supplies, while noting that item unique identification is not required by the service customer.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, THRUST
Solicitation # SPE4A6-26-T-14XM
This solicitation is for the procurement of one thrust ball bearing, identified by NSN 3110-01-492-9769 and associated with Johnson Controls Navy Systems part numbers. The contract mandates strict domestic sourcing requirements under DFARS 252.225-7016, requiring the bearing to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for award. The agreement includes comprehensive technical and quality requirements, including prohibitions on the intentional addition of mercury and adherence to specific sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and preservation must comply with MIL-DTL-197M and MIL-STD-129, with delivery expected within 171 days. Inspection and acceptance will occur at the destination, and the contractor must adhere to DLA packaging requirements and tailored higher-level quality standards.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, DUPLEX
Solicitation # SPE4A6-26-T-15EJ
This contract is for the procurement of five duplex ball bearings, identified as commercial critical application items under NSN 3110-01-407-4260. The requirement specifies that the bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. The agreement mandates strict adherence to various technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and MIL-DTL-197M preservation protocols. Additionally, the hardware must be provided in a mercury-free environment. Delivery is required within 171 days from the award date, with the inspection and acceptance points set at the destination.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A0-26-T-4246
This contract, identified as SPE4A0-26-T-4246, is for the procurement of four sleeve bushings under NSN 3120-00-500-0038 and part number 86398 from Hydro-Aire Aerospace Corp. The order is managed by the Department of Defense Aviation Supply Chain ESOC Buys with a required delivery date of April 23, 2026, and a delivery timeframe of five days after order. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically Fort Riley, Kansas. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. The contract also incorporates specific technical and quality requirements from the DLA Master List and requires the removal of government identification from any non-accepted supplies.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, NEEDLE
Solicitation # SPE4A6-26-T-14ZH
This contract is a solicitation for the procurement of 34 needle roller bearings, identified by NSN 3110-01-486-1945 and part number 036 107 from Sauer Compressors USA, Inc. The items are designated as critical application items and must be delivered FOB Origin within 171 days. The contract mandates strict adherence to DLA packaging and marking requirements, specifically referencing MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M for preservation and quality assurance. A primary requirement of this acquisition is the restriction on ball and roller bearings, which stipulates that the items must be manufactured in the United States, its outlying areas, or Canada. Furthermore, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-15CX
This contract is for the procurement of 14 sleeve bushings, identified by NSN 3120-00-691-6771 and part number 489-15 from MAS Components and Coatings, LLC. The agreement is managed by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-15CX. Delivery is required within 171 days, with a required delivery date of November 10, 2026, and a need ship date of February 7, 2027. The items are to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA packaging and marking requirements, specifically referencing MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract allows for zero quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-15AW
This contract is for the procurement of 11 sleeve bearings, identified by NSN 3120015936372 and associated with part numbers from Electric Boat Corporation and Kamatics Corporation. The order is designated as a critical application item and is subject to specific technical and quality requirements, including DLA packaging standards and the prohibition of mercury or mercury-containing compounds in the hardware and packaging. The delivery is set for 171 days after order, with a required delivery date of April 27, 2027, and a need ship date of February 7, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Item Unique Identification is not required for this order.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2889
This contract, identified as SPE8EN-26-T-2889, is a solicitation from the Department of Defense for one yellow photographic equipment case with pick n pluck foam, specifically Pelican Products Inc part number 1450. The item is associated with NSN 6760-01-491-2090 and must be delivered within 20 days. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination in JBER, Alaska. The agreement incorporates several DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking. It specifies that the item does not require class I ozone depleting substances and notes that no approved technical data package is currently available for this NSN. The required delivery date is set for August 13, 2026, and the contract mandates adherence to specific packaging and palletization standards while encouraging the avoidance of plastics for wrapping and cushioning.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-15LA
This solicitation is for the procurement of 14 annular ball bearings, identified by NSN 3110-01-558-5071 and MPB Corp part number T744-000. The contract requires delivery within 136 days and specifies FOB Origin shipping with inspection and acceptance occurring at the destination. A critical requirement of this contract is the restriction on the acquisition of ball and roller bearings, mandating that the items be manufactured in the United States, its outlying areas, or Canada. Furthermore, the cost of components manufactured in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for award. The contract adheres to strict quality and technical standards, including CMMC Level 2 self-assessment and specific DLA packaging requirements. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-197K, with marking following MIL-STD-129. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling Support
Other Scientific and Technical Consulting Services

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Blind Rivet Manufacturing and Supply
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-15KX
This contract is for the procurement of 26 machine screws, identified by NSN 5305009399256 and part number MS35275-251. The items must be manufactured in accordance with the current revision of the NASM35275 standard and are classified as critical application items. Delivery is required within 171 days, with a final required delivery date of March 24, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to quality and technical requirements, including MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging processes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE4A6-26-T-14ZK
This contract is for the procurement of 10 units of the Modulator PCB Assembly 25KW, identified by part number 65825812 and NSN 5998015258671. Manufactured by Northrop Grumman Systems Corporation, this critical application item is an electrostatic sensitive device used in X-Band training units. The delivery is set for 171 days after order, with a required delivery date of June 25, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to cybersecurity and safety standards, including CMMC Level 2 self-assessment and the application of covered defense information. It prohibits the intentional addition of mercury or mercury-containing compounds. Due to the sensitive nature of the electronics, the supplier must utilize DOD-qualified ESD and EMI protective packaging materials in accordance with MIL-PRF-81705 and MIL-STD-129 to prevent damage to leads and terminals during transit.
Bare Printed Circuit Board Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-15CW
This contract is for the procurement of 209 shoulder screws, identified by NSN 5305-01-179-7460 and Avibank Mfg. Inc. part number 18-53301. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after order, with an original required delivery date of December 6, 2026, and a need ship date of February 7, 2027. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the point of origin, and the contract specifies a zero percent quantity variance for the order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-15EL
This contract is a solicitation for the procurement of 62 headless straight pins, identified by NSN 5315-01-303-2962 and part number 6532B384-4 from Indal Technologies Inc. The delivery timeline is set for 171 days after order. The acquisition is managed by the Department of Defense ASC Commodities Division and must adhere to specific DLA technical and quality requirements, including strict packaging and marking standards. The items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings consisting of the contract number, NAWC CAGE, and part number. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
Other Fabricated Wire Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, TUBULAR
Solicitation # SPE4A6-26-T-15KB
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of 2,526 tubular rivets under part number 5320-01-333-9936. The contract requires delivery within 240 days after receipt of order and is categorized under NAICS code 332510. Performance is designated for Tracy, California. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the technical data is subject to ITAR or EAR restrictions, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed export control training. All technical data disclosure must be authorized by the Department of State or Department of Commerce in accordance with DFARS 252.225-7048.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-86F1
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-14XJ
This contract is for the procurement of nine grip-type electrical power cable assemblies, identified as a critical application item. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment, SAE AS9100 quality standards, and specific packaging and marking protocols per MIL-STD-129 and MIL-STD-2073-1E. Inspection and acceptance are to occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. A key requirement of this solicitation is Production Lot Testing conducted by the government at the Redstone Test Center. For the specified quantity, 100 percent of the deliverables must undergo this testing. The items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2027. This opportunity is designated as a Women-Owned Small Business Set-Aside.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-15FV
This contract is for the procurement of three special purpose electrical cable assemblies, identified by NSN 5995016304661 and part number 03538SOCN7288463P010 from Winchester Interconnect RF Corporation. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after the order, with a required delivery date of February 14, 2027. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information protocols. While physical identification and bare item marking are required, Item Unique Identification is not necessary per the service customer's request.
Other Building Material Dealers

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details