Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, ROLLER, TAPE

Active
SPE4A6-26-T-26CHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one tape roller bearing, identified by NSN 3110016971397 and part number CC70679. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-26CH. Delivery is required within 20 days after the order date, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and preservation must comply with MIL-DTL-197M, MIL-STD-129, and DLA packaging requirements to ensure the item is protected based on its specific bearing type and size. Item Unique Identification is not required for this request.

General Info

DoD procurement of one tape roller bearing CC70679 delivered within 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-26CH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Cynthia Conner
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,ROLLER,TAPE
BEARING,ROLLER,TAPE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 2 IAW BASIC DRAWING NR 07270 CC70679 REVISION NR DTD 04/18/2019 PART PIECE NUMBER: CC70679 ITEM 9
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-26CH
SECTION B
PR: 7017673462 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673462 0001 EA 1.000
NSN/MATERIAL:3110016971397
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ADDITIONAL INFORMATION PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-697-1397 Quantity: 1 EA Purchase Request: 7017673462QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING HALF SET, SLEEV
Solicitation # SPE4A6-26-T-25ZB
This contract is for the procurement of 619 units of bearing half sets, sleeve, identified by NSN 3120-00-843-6994. The unit of issue is defined as two half sleeves per each unit. The delivery is required within 171 days, with a need ship date of March 1, 2027, and delivery is set as FOB Origin with inspection and acceptance occurring at the destination. The items are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and the prohibition of mercury or mercury-containing compounds in the hardware and packaging. It specifies that each sleeve must be wrapped in neutral paper to prevent damage. The items are designated as critical application items and must comply with specific part numbers from approved manufacturers such as Oshkosh Defense, Rolls-Royce Solutions America, Penske Power Systems, and Federal-Mogul Corporation.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
RETAINER, MID BEARIN
Solicitation # SPE4A6-26-T-26BG
This contract is a solicitation for the procurement of five mid bearing retainers, identified by NSN 3110007978016 and part number 6797881. The items are designated as critical application items and must comply with specific technical and quality requirements, including DLA packaging standards and strict sampling methods such as MIL-STD-1916 or ASQ H1331. Delivery is required within 153 days, with a final required delivery date of April 24, 2028, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. A primary requirement of this solicitation is adherence to domestic sourcing restrictions for ball and roller bearings. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials; failure to provide this documentation may result in the quote being rejected. The contract also mandates compliance with MIL-STD-129 for marking and RP001 for palletization.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-25ZD
This solicitation is for the procurement of 31 annular ball bearings, identified by NSN 3110-00-963-1844 and part number 258415 from Eaton Aerospace. The items are designated as critical application items and must be delivered within 371 days. Inspection and acceptance will occur at the point of origin, with packaging and marking requirements adhering to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M. A strict domestic sourcing restriction applies under DFARS 252.225-7016, requiring the bearings to be manufactured in the United States, its outlying areas, or Canada. Additionally, the cost of components manufactured in these regions must exceed 50% of the total component cost. Contractors must provide a signed declaration regarding the domestic or foreign nature of the materials to be considered for award. Failure to meet these sourcing requirements may lead to the cancellation of the solicitation unless a waiver is approved.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-26AJ
This contract is for the procurement of two thrust washer bearings under solicitation number SPE4A6-26-T-26AJ for the Department of Defense. The items are identified by NSN 3120-00-015-6610 and correspond to part number 9419639 from General Motors Corp or The W.W. Williams Company, LLC. Delivery is required within 20 days, with a required delivery date of September 8, 2026, shipping FOB Origin to the Ordnance Readiness Development Center in Taiwan. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-26CZ
This solicitation requires the delivery of 21 units of item 10099824, with a specific requirement for the contractor to provide 3 units for first article testing at Tinker Air Force Base within 240 calendar days of the contract date. The government will notify the contractor of the approval or disapproval of these first article tests within 180 calendar days of receipt. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and must certify that they will not provide covered telecommunications equipment or services. Compliance with domestic material restrictions, including the Berry Amendment and the Buy American Act, is mandatory, and any non-domestic materials must be disclosed. Additionally, contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Small business joint ventures must provide specific representations and certifications, and the solicitation emphasizes that Fast Pay does not apply to this requirement.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING HALF, SLEEVE
Solicitation # SPE4A6-26-T-26AU
This contract is for the procurement of 917 sleeve bearing halves, identified as a critical application commercial item. The parts are sourced from Cummins Inc under part number 3969562 and NSN 3120015815885. The agreement specifies a delivery timeframe of 171 days after order, with a required delivery date of January 26, 2027, and a need ship date of March 1, 2027. Shipping is set as FOB Origin, with the destination and inspection point located at the DLA Distribution Depot Hill in Utah. The contract is subject to extensive technical and quality requirements as outlined in the DLA Master List, including specific mandates for source approval documentation, covered defense information, and measuring and test equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Notably, item unique identification is not required for this order. Configuration control is maintained according to TDP Rev A Gen 1 and reference QAP 13873.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PLATE, RETAINING, BEA
Solicitation # SPE4A6-26-T-26AR
This solicitation, identified as SPE4A6-26-T-26AR, is for the procurement of 102 retaining plates for bearings under NSN 3110-01-130-2039. The delivery requirement is 154 days after receipt of order. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and should use the DIBBS system to submit quotes or no-bid notifications to inform buyers of their intent. Compliance requirements include strict adherence to domestic material restrictions, such as the Berry Amendment and Buy American Act, and a prohibition on providing covered telecommunications equipment. Small business joint ventures must provide specific representations under FAR and DFARS guidelines. Additionally, contractors must prepare for mandatory registration via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-25ZR
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 72 sleeve bearings under part number 3120-01-524-3397. The contract requires delivery within 171 days after receipt of order and is categorized under NAICS code 332991. Performance is to be executed in New Cumberland, Pennsylvania. The agreement is subject to several critical technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training. Item Unique Identification is not required for this specific request.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-26BJ
This contract is a solicitation for the procurement of 59 annular ball bearings, identified by NSN 3110-01-230-5313 and part number SSRF-3ZZHA3P18LY48. The delivery is required within 85 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is designated as a critical application item and must adhere to specific shelf life and quality requirements as outlined in the DLA Master List. A primary requirement of this contract is the domestic sourcing restriction, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada. Additionally, at least 50 percent of the total cost of the bearing components must originate from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. Packaging, preservation, and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M standards.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAM
Solicitation # SPE4A6-26-T-26AS
This solicitation, number SPE4A6-26-T-26AS, is issued by the Department of Defense ASC Commodities Division for the procurement of 10 airframe roller bearings (NSN 3110-01-096-0038). The delivery requirement is 154 days after receipt of order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must certify that they will not provide covered telecommunications equipment or services. Compliance with domestic material restrictions, including the Buy American Act and the Berry Amendment, is mandatory, with specific disclosure required for non-domestic materials. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized, and small business joint ventures must submit required representations and certifications with their offers.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ROD END
Solicitation # SPE4A6-26-T-26AV
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 20 rod end ball bearings under part number 3110-00-702-5702. The contract requires delivery within 154 days after order and specifies performance in San Diego. It is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, quality conformance inspection, and inspection and acceptance at origin. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a C3PAO and adherence to covered defense information protocols. The contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additionally, the agreement mandates physical identification of bare items and specific documentation for source approval requests, though item unique identification is not required.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-12WV
This contract is for the procurement of three sleeve bearings identified by NSN 3120015002730 and part number KNRJ44-V-120-8 from KAMATICS CORPORATION, issued under solicitation SPE4A6-26-T-12WV by the Defense Logistics Agency Aviation, ASC Commodities Division. The requirement is for delivery FOB Origin within 170 days of order receipt, with a required delivery date of June 1, 2027, and a need ship date of January 31, 2027. All items must be shipped to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with no variation allowed in quantity. Inspection and acceptance occur at the destination, and compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is mandatory, including the use of specific packaging codes and procedures outlined in the contract. Palletization must adhere to DLA Packaging Requirements RP001, and all preservation, packaging, and marking materials must be free of mercury or mercury compounds as prohibited under IP056, with additional restrictions on intentional mercury use in the product itself except for specified functional applications such as batteries or sensors. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes a full suite of FAR and DFARS clauses governing quality, cybersecurity, compliance, and administrative procedures. Quality requirements mandate compliance with ISO 9001:2015 or an equivalent standard, with offerors required to clearly identify any alternative standard. Technical and quality specifications referenced by 'R' or 'I' numbers are governed by the current revision of the DLA Master List of Technical and Quality Requirements. Cybersecurity obligations include adherence to NIST SP 800-171 and DFARS 252.247-7012, while prohibitions extend to hexavalent chromium, covered telecommunications equipment, and procurement from Communist Chinese military companies. The contract requires electronic submission via DIBBS by August 13, 2026, and mandates use of the Wide Area Workflow system for invoicing and receiving reports. Offerors must maintain current SAM registrations, submit a Safety
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BF
This contract is for the procurement of blind rivets, specifically part number NAS1921B05-03 under NSN 5320001652084. The total quantity requested is 14,171 units, split between two delivery locations: 4,121 units to DLA Distribution San Diego and 10,050 units to DLA Distribution Warner Robins. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable military or non-government part standards. Delivery is required within 99 days, with specific need ship dates in May and July 2026 and a final required delivery date of March 2, 2027. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, SPRING
Solicitation # SPE4A6-26-U-3352
This contract is for the procurement of 1,117 spring pins, identified by NSN 5315-00-004-3134 and part number NAS561S3-12. The requirement is a total small business set-aside under NAICS code 332510, with delivery expected within 71 days after the order. The items are designated as critical application items and must adhere to technical standards NAS561 and NASM10971. The agreement mandates strict quality and sampling protocols following MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and the use of mercury or mercury-containing compounds is strictly prohibited. All marking must be performed in accordance with MIL-STD-129.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-26AF
This contract is for the procurement of 20 feet of electrical insulation sleeving, identified as NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a commercial critical application item and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturers List or Qualified Products List. It has a 12-month extendable shelf life and must adhere to SAE AS23053/1 standards. The agreement specifies a delivery timeframe of 20 days and requires compliance with DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-25ZJ
This contract is for the procurement of 6,977 blind rivets, identified as a critical application commercial item under NSN 5320010903166. The items must be manufactured in accordance with the current revisions of non-government standards NAS9305 and NAS1686. Quality assurance requires sampling based on MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The delivery is set for 171 days after order, with a required delivery date of April 5, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SPLIN
Solicitation # SPE4A6-26-T-26BX
This contract is for the procurement of 5,359 self-locking spline nuts under NSN 5310010540004. The items are identified as commercial products, with specific part numbers associated with Huck International, Inc. and Fastener Technology Corp. Delivery is required within 46 days after the order, with a final required delivery date of May 28, 2027, shipping FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information standards. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract is designated as a HUBZone set-aside under NAICS code 332722 and is managed by the Department of Defense ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-26AK
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of four straight, headless steel pins measuring 1.25 inches in length and 0.5 inches in diameter. Identified by NSN 5315-00-058-9956, the items are being procured under a fully competitive process in accordance with military and federal specifications. Delivery is required within 20 days after the order is placed. The contract is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. It also notes that covered defense information potentially applies to this acquisition. Interested parties must respond by September 10, 2026, under solicitation number SPE4A6-26-T-26AK.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RETAINER, TURNLOCK F
Solicitation # SPE4A6-26-T-26AZ
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock fastener ejector spring retainers, identified by NSN 5325-00-291-9360. The contract requires delivery within 256 days after order and is categorized under NAICS code 332119. Performance is designated for New Cumberland, Pennsylvania. The agreement includes stringent security and quality mandates, including CMMC Level 2 certification for third-party assessment and compliance with ITAR and EAR export controls. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD training to access technical data. Additionally, the contract adheres to DLA packaging requirements, physical identification marking, and specific higher level quality requirements as outlined in the DLA master list.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-26BW
This contract is for the procurement of 164 close tolerance screws, identified by NSN 5305-01-539-5971. The order is designated as a critical application item and lists several approved manufacturers and part numbers, including those from Fastener Innovation Technology, The Boeing Company, and Howmet Global Fastening Systems. Delivery is required within 171 days, with a need date of March 1, 2027, and shipment is to be delivered FOB origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Quality assurance involves inspection and acceptance at the origin, with a zero percent quantity variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements for procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3393
This contract is for the procurement of 238 machine bolts, identified by NSN 5306006379158 and part number AN101127. The items are classified as critical application commercial items and must be manufactured according to the current revision of the applicable part standards, specifically referencing non-government standards AN101101 through AN101200 and SAE AS7452. Delivery is required within 15 days after the order, with FOB, inspection, and acceptance all occurring at the point of origin. The supplier must adhere to strict quality and technical requirements, including SAE AS9100 for manufacturers and specific gauging requirements for Class 3A and 3B threads per FED-STD-H28/20. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Sampling for acceptance will be conducted according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots unless otherwise specified.
Nonferrous Forging

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BU
This solicitation is for the procurement of 20 blind rivets under contract number SPE4A6-26-T-26BU for the Department of Defense ASC Commodities Division. The items are identified as critical application commercial hardware and must adhere to non-government standards NAS1674 and NAS1675. All hardware manufactured from the date of solicitation must comply with the current revision of these part standards. The contract mandates strict quality and sampling protocols, requiring adherence to MIL-STD-1916 or ASQ H1331 with a zero-based sampling plan. Delivery is required within five days after receipt of order, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-U-3414
This contract is for the procurement of 473 socket head cap screws made from a nickel copper alloy, specifically 0.050-13UNC-3A x 1.000 inch. The items are identified as critical application commercial items and must conform to the current revision of the applicable part standards and technical data package. Dimensional conformance for class 3A and 3B threads must be inspected according to System 22 of FED-STD-H28/20. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-130N for identification marking. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with a required Certificate of Quality Compliance. Delivery is set for 92 days after order, with inspection and acceptance occurring at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details