Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, STAVE SHAPED

Active
SPE7M0-26-Q-1149Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 24 stave bearings, Class 3, Size No. 9, 1/16 inch oversize, 30 inches long, designed for use as an aft stern tube bearing assembly and manufactured to MIL-DTL-17901C with compliance to MIL-STD-129R and MIL-STD-2073-1E. Each stave is individually packaged in a unit package with no preservative required, wrapped in opaque or kraft paper to shield from sunlight, and enclosed in a weather-resistant single-wall fiberboard container with glued seams—no staples allowed. All units are overpacked in overseas-grade wooden boxes to ensure protection during transit and storage. Strict packaging rules prohibit bulk packaging, metal strapping directly on the staves, and any labeling on bare surfaces. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and falls under the DLA Master List of Technical and Quality Requirements. The procurement prohibits ozone-depleting chemicals and mercury-containing compounds, with limited exceptions for specific functional uses mandated by NAVSEA. The delivery is FOB origin with a 30-day lead time, to be inspected and accepted at destination. The required sampling method follows MIL-STD-1916 or ASQ SPE7M0-26-Q-1149 with zero non-conformances permitted unless otherwise specified. Special marking “DO NOT BEND” must be applied to all unit containers, and shelf-life dates are to be indicated. The end user is the Egyptian Navy, with shipments routed through Amentum Warehouse in Fredericksburg, VA, and ultimately delivered to Ras El Tin, Alexandria. The contract mandates full and open competition and requires all technical and quality standards referenced from DLA’s eProcurement portal to be strictly adhered to. Substitutions for restricted materials require prior approval, and deviations must be formally requested through an Engineering Change Proposal. The item is identified by NSN 2010-01-209-9650 and is subject to a zero variance in quantity with delivery scheduled for early 2026.

General Info

24 Class 3 stave bearings, 30 inches, MIL-DTL-17901C, 180-month shelf life, delivered to Egyptian Navy, FOB origin, strict packaging and zero defect requirements.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-Q-1149.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Kathleen Hipes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STAVE, BEARING. CLASS 3, SIZE NO. 9, 1/16 IN. OVERSIZE, 30 IN. LONG,
PACKED 1 STAVE PER BOX, MIL SPEC TITLED: "BEARING COMPONENTS, BONDED
SYNTHETIC RUBBER, WATER LUBRICATED."
E/I AFT STERN TUBE BEARING ASSY.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
INCLUDE CS046 OBJECT TEXT ID ST
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
INCLUDE CSS01 OBJECT TEXT ID ST
INCLUDE CST01 OBJECT TEXT ID ST
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-17901C NOT 2 REVISION NR C DTD 02/06/2023 PART PIECE NUMBER: CLSAS 3 SIZE 9
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 2010-01-209-9650 24.000 EA $ _______________ $ ______________
BEARING,STAVE
SHAPED
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKING OF (RUBBER) BEARING
STAVES REVISION A DATED 00279
.
SCOPE: THIS SPECIAL PACKAGING INSTRUCTION
DETAILS THE PROCEDURE FOR CLEANING,PRESERVATION
PACKAGING, AND PACKING OF (RUBBER) BEARING
STAVES INDENTIFIED UNDER MIL-DTL-2845E.
.
1. QUANITY UNIT PACK (QUP): ITEM IS CONSIDERED
TO BE A REPAIR PART AND SHALL BE PACKAGED ONE
PART PER UNIT PACKAGE, EXCEPT ALL THE PARTS
COMPRISING A SINGLE SET, ASSEMBLY, BOX, OR
MULTIPLE QUP SHALL BE PACKAGED TOGETHER.
UNIT OF ISSUE OR MULTIPLE QUPS SHALL DETERMINE
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
IF THE ITEM SHALL BE PACKAGED UNDER THE
PACKAGING REQUIREMENTS SPECIFICALLY DESIGNATED
FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUPS.
.
2. METHOD OF PRESERVATION: THE METHOD OF
PRESERVATION UTILIZED FOR ALL LAMINATED PHENOLIC
OR RUBBER, BRASS BACKED BEARING STAVES SHALL BE
METHOD "10" (PHYSICAL AND MECHANICAL PROTECTION)
I/A/W WITH MIL-STD-2073 (LATEST REVISION).
.
3. CLEANING: EACH ITEM SHALL BE CLEANED AND
DRIED BY ANY SUITABLE PROCESS OR PROCESSES,
WHICH ARE NOT INJURIOUS TO THE ITEM.
.
4. PRESERVATIVE MATERIAL: NO PRESERVATIVE
REQUIRED.
5. WRAPPING: TO PROTECT ITEMS FROM DIRECT
EXPOSURE TO SUNLIGHT AS SPECIFIED MIL-DTL-2845E,
TABLE I, NOTE 1-EACH ITEM SHALL BE INDIVIDUALLY
COVERED WITH AN OPAQUE OR KRAFT WRAPPING PAPER
IN ACCORDANCE WITH A-A-203, TYPE AND STYLE ARE
OPTIONAL. WRAPPING MATERIAL SHALL SNUGGLY
ENCLOSE THE ITEM AND BE SECURED WITH TAPE TO
PREVENT UNINTENTIONAL UNWRAPPING.
UNDER NO CIRCUMSTANCES SHALL ANY TAPE BE APPLIED
TO THE BARE ITEM. (SEE SPECIAL NOTE 11(A) FOR
SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUANTITY
UNIT PACKS).
.
6. CUSHIONING: (FOR SETS, ASSEMBLIES, BOXES OR
MULTIPLE QUPS ONLY):
ITEMS SHALL BE CUSHIONED TO PREVENT DAMAGE.
CUSHIONING MATERIAL USED WITHIN THE UNIT PACK
SHALL CONFORM TO ANY OF, COMBINATION OF, THE
FOLLOWING SPECIFICATIONS, AT THE CONTRACTOR'S
OPTION, WHICH WILL PROVIDE THE REQUIRED
PROTECTION (SEE SPECIAL NOTE 11(A) FOR SETS,
ASSEMBLIES, BOXES, OR MULTIPLE QUPS):
.
A. A-A-1898 (CELLULOSIC)
B.PPP-C-1120, CLASS A, GRADE 1, TYPE OPTIONAL
(BOUND FIBER)
C. A-A-203 (PAPER, KRAFT, UNTREATED)
D. MIL-B-3106 (BOARD, COMPOSTION,
WATER-RESISTANT, SOLID)
E. MIL-R-5001, GRADE A, TYPE AND CLASS OPTIONAL
(RUBBER, LATEX FOAM)
F. MIL-R-6130, GRADE A (RUBBER, CELLULAR)
G. MIL-R-20092, CLASS 5 (RUBBER SHEETS AND
ASSEMBLED AND MOLDED SHAPES, CELLULAR,
SYNTHETIC, OPEN CELL)
7. UNIT CONTAINERS:
A. FOR UNIT OF ISSUE OF "EA" (EACH):
(1) AFTER ITEM IS INDIVIDUALLY WRAPPED IN
ACCORDANCE WITH STEP 5, EACH ITEM SHALL BE
PLACED IN AN ASTM D5118, TYPE CF, CLASS
WEATHER-RESISTANT SINGLEWALL FIBERBOARD
CONTAINER, PREFERABLY A REGULAR SLOTTED
CONTAINER (RSC) END-LOADING. SELECTION OF
CONTAINER (W5C, W6C, OR V3C) SHALL BE IN
ACCORDANCE WITH SIZE AND WEIGHT LIMITATIONS OF
ASTM D5118.
.
(2) MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR METALS
FASTENERS MAY CAUSE DAMAGE TO THE ITEM.
.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
B. FOR UNIT OF ISSUE OF "SE" "AY" OR "BX" (SET,
ASSEMBLY, BOX) OR MULTIPLE QUPS:
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
.
(1) AFTER EACH ITEM OF THE SET, ASSEMBLY, BOX,
OR MULTIPLE QUP IS WRAPPED AND CUSHIONED IN
IN ACCORDANCE WITH STEPS 5 AND 6, THE ITEMS
SHALL BE PLACED TOGETHER IN ONE OF THE UNIT
CONTAINERS SPECIFIED BELOW (SELECTION OF
CONTAINER SHALL BE IN ACCORDANCE WITH
SIZE AND WEIGHT LIMITATIONS OF SPECIFICATION):
(A) ASTM D5118, TYPE CF, CLASS WEATHER-RESISTANT
DOUBLEWALL CORRUGATED FIBERBOARD BOX (W5C, W6C,
OR V3C);
(B) FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE
QUPS WEIGHING MORE THAN 60 POUNDS, THE UNIT
CONTAINER SHALL BE THE SAME AS THE SHIPPING
CONTAINER AS CITED IN STEP 10.
FIBERBOARD CONTAINERS:
(2) THE MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR
METALS FASTENERS MAY CAUSE DAMAGE TO ITEM.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
8. MARKING: MARKING SHALL BE IN ACCORDANCE WITH
MIL-STD-129 (LATEST REVISION).
ALL UNIT CONTAINERS SHALL BE MARKED WITH SPECIAL
MARKING CODE 20-"DO NOT BEND." WHEN APPLICABLE,
SHELF LIFE MARKINGS SHALL BE APPLIED TO THE UNIT
CONTAINER (I.E. TYPE I OR TYPE II).
.
9. PACK/PACKING LEVEL: THE PACK AND PACKING
LEVELS SHALL BE AS SPECIFIED IN THE CONTRACTUAL
AGREEMENT AND IN ACCORDANCE WITH STEP 10.
10. SHIPPING CONTAINERS: ALL PACKAGED RUBBER
BEARING STAVES SHALL BE OVERPACKED IN WOODEN
BOX TO ENSURE ITEM IS NOT DAMAGED DURING
SHIPPING, STORAGE, AND HANDELING. ACCEPTABLE
CONTAINERS ARE AS FOLLOWS:
(A) PPP-B-621, NAILED WOOD BOX, OVERSEAS TYPE;
(B) PPP-P-601, CLEATED PLYWOOD BOX, OVERSEAS
OVERSEAS TYPE.
QUANTITY OF UNIT PACKAGES IN A SHIPPING
CONTAINER SHALL BE AT CONTRACTOR'S DISCRETION.
HOWEVER, STACKING OF CONTAINERS SHALL NOT
EXCEED THE FIBERBOARD CONTAINER'S PERFORMANCE
CAPABILITIES TO ENSURE PRODUCT QUALITY
THROUGHOUT THE DISTRIBUTION CYCLE.
.
11. SPECIAL NOTES:
(A) WHEN THE UNIT IS PACKAGED AS A SET,
ASSEMBLY, BOX, OR QUP GREATER THAN ONE, EACH
ITEM SHALL BE WRAPPED AND CUSHIONED TO PREVENT
DIRECT SURFACE CONTACT WITH THE SURFACE OF THE
ADJACENT PARTS.
(B) UNDER NO CIRCUMSTANCES SHALL ANY
MIL-STD-129 MARKINGS/LABELS BE APPLIED TO THE
BARE ITEM.
(C) BULK PACKAGING IS NOT ACCEPTABLE. THIS
PACKAGING TECHNIQUE CREATES A PERMANENT
DEFORMATION TO THE ITEM.
(D) METAL STRAPPING SHALL NOT BE APPLIED
DIRECTLY TO BEARING STAVES, SINCE IT CREATES
PRODUCT DEFORMATION.
(E) TO REDUCE TARE AND CUBE, EXCESSIVE USE OF
CUSHIONING WITHIN THE UNIT CONTAINER SHALL BE
AVOIDED.
FREIGHT FORWARDER:
PEG00L
AMENTUM WAREHOUSE
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
5160 LAD LAND DRIVE
FREDERICKSBURG, VA 22407
US
FREIGHT SHIPPING ADDRESS:
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
MARKFOR
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
M/F: (TCN) PEGA5N52246149
RDD:
PROJ: TP 1
SUPP ADD: PALGKB SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: 2L FC: 48
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0002 2010-01-209-9650 24.000 EA $ ______________ $ ______________
BEARING,STAVE
SHAPED
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKING OF (RUBBER) BEARING
STAVES REVISION A DATED 00279
.
SCOPE: THIS SPECIAL PACKAGING INSTRUCTION
DETAILS THE PROCEDURE FOR CLEANING,PRESERVATION
PACKAGING, AND PACKING OF (RUBBER) BEARING
STAVES INDENTIFIED UNDER MIL-DTL-2845E.
.
1. QUANITY UNIT PACK (QUP): ITEM IS CONSIDERED
TO BE A REPAIR PART AND SHALL BE PACKAGED ONE
PART PER UNIT PACKAGE, EXCEPT ALL THE PARTS
COMPRISING A SINGLE SET, ASSEMBLY, BOX, OR
MULTIPLE QUP SHALL BE PACKAGED TOGETHER.
UNIT OF ISSUE OR MULTIPLE QUPS SHALL DETERMINE
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
IF THE ITEM SHALL BE PACKAGED UNDER THE
PACKAGING REQUIREMENTS SPECIFICALLY DESIGNATED
FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUPS.
.
2. METHOD OF PRESERVATION: THE METHOD OF
PRESERVATION UTILIZED FOR ALL LAMINATED PHENOLIC
OR RUBBER, BRASS BACKED BEARING STAVES SHALL BE
METHOD "10" (PHYSICAL AND MECHANICAL PROTECTION)
I/A/W WITH MIL-STD-2073 (LATEST REVISION).
.
3. CLEANING: EACH ITEM SHALL BE CLEANED AND
DRIED BY ANY SUITABLE PROCESS OR PROCESSES,
WHICH ARE NOT INJURIOUS TO THE ITEM.
.
4. PRESERVATIVE MATERIAL: NO PRESERVATIVE
REQUIRED.
5. WRAPPING: TO PROTECT ITEMS FROM DIRECT
EXPOSURE TO SUNLIGHT AS SPECIFIED MIL-DTL-2845E,
TABLE I, NOTE 1-EACH ITEM SHALL BE INDIVIDUALLY
COVERED WITH AN OPAQUE OR KRAFT WRAPPING PAPER
IN ACCORDANCE WITH A-A-203, TYPE AND STYLE ARE
OPTIONAL. WRAPPING MATERIAL SHALL SNUGGLY
ENCLOSE THE ITEM AND BE SECURED WITH TAPE TO
PREVENT UNINTENTIONAL UNWRAPPING.
UNDER NO CIRCUMSTANCES SHALL ANY TAPE BE APPLIED
TO THE BARE ITEM. (SEE SPECIAL NOTE 11(A) FOR
SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUANTITY
UNIT PACKS).
.
6. CUSHIONING: (FOR SETS, ASSEMBLIES, BOXES OR
MULTIPLE QUPS ONLY):
ITEMS SHALL BE CUSHIONED TO PREVENT DAMAGE.
CUSHIONING MATERIAL USED WITHIN THE UNIT PACK
SHALL CONFORM TO ANY OF, COMBINATION OF, THE
FOLLOWING SPECIFICATIONS, AT THE CONTRACTOR'S
OPTION, WHICH WILL PROVIDE THE REQUIRED
PROTECTION (SEE SPECIAL NOTE 11(A) FOR SETS,
ASSEMBLIES, BOXES, OR MULTIPLE QUPS):
.
A. A-A-1898 (CELLULOSIC)
B.PPP-C-1120, CLASS A, GRADE 1, TYPE OPTIONAL
(BOUND FIBER)
C. A-A-203 (PAPER, KRAFT, UNTREATED)
D. MIL-B-3106 (BOARD, COMPOSTION,
WATER-RESISTANT, SOLID)
E. MIL-R-5001, GRADE A, TYPE AND CLASS OPTIONAL
(RUBBER, LATEX FOAM)
F. MIL-R-6130, GRADE A (RUBBER, CELLULAR)
G. MIL-R-20092, CLASS 5 (RUBBER SHEETS AND
ASSEMBLED AND MOLDED SHAPES, CELLULAR,
SYNTHETIC, OPEN CELL)
7. UNIT CONTAINERS:
A. FOR UNIT OF ISSUE OF "EA" (EACH):
(1) AFTER ITEM IS INDIVIDUALLY WRAPPED IN
ACCORDANCE WITH STEP 5, EACH ITEM SHALL BE
PLACED IN AN ASTM D5118, TYPE CF, CLASS
WEATHER-RESISTANT SINGLEWALL FIBERBOARD
CONTAINER, PREFERABLY A REGULAR SLOTTED
CONTAINER (RSC) END-LOADING. SELECTION OF
CONTAINER (W5C, W6C, OR V3C) SHALL BE IN
ACCORDANCE WITH SIZE AND WEIGHT LIMITATIONS OF
ASTM D5118.
.
(2) MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR METALS
FASTENERS MAY CAUSE DAMAGE TO THE ITEM.
.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
B. FOR UNIT OF ISSUE OF "SE" "AY" OR "BX" (SET,
ASSEMBLY, BOX) OR MULTIPLE QUPS:
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
.
(1) AFTER EACH ITEM OF THE SET, ASSEMBLY, BOX,
OR MULTIPLE QUP IS WRAPPED AND CUSHIONED IN
IN ACCORDANCE WITH STEPS 5 AND 6, THE ITEMS
SHALL BE PLACED TOGETHER IN ONE OF THE UNIT
CONTAINERS SPECIFIED BELOW (SELECTION OF
CONTAINER SHALL BE IN ACCORDANCE WITH
SIZE AND WEIGHT LIMITATIONS OF SPECIFICATION):
(A) ASTM D5118, TYPE CF, CLASS WEATHER-RESISTANT
DOUBLEWALL CORRUGATED FIBERBOARD BOX (W5C, W6C,
OR V3C);
(B) FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE
QUPS WEIGHING MORE THAN 60 POUNDS, THE UNIT
CONTAINER SHALL BE THE SAME AS THE SHIPPING
CONTAINER AS CITED IN STEP 10.
FIBERBOARD CONTAINERS:
(2) THE MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR
METALS FASTENERS MAY CAUSE DAMAGE TO ITEM.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
8. MARKING: MARKING SHALL BE IN ACCORDANCE WITH
MIL-STD-129 (LATEST REVISION).
ALL UNIT CONTAINERS SHALL BE MARKED WITH SPECIAL
MARKING CODE 20-"DO NOT BEND." WHEN APPLICABLE,
SHELF LIFE MARKINGS SHALL BE APPLIED TO THE UNIT
CONTAINER (I.E. TYPE I OR TYPE II).
.
9. PACK/PACKING LEVEL: THE PACK AND PACKING
LEVELS SHALL BE AS SPECIFIED IN THE CONTRACTUAL
AGREEMENT AND IN ACCORDANCE WITH STEP 10.
10. SHIPPING CONTAINERS: ALL PACKAGED RUBBER
BEARING STAVES SHALL BE OVERPACKED IN WOODEN
BOX TO ENSURE ITEM IS NOT DAMAGED DURING
SHIPPING, STORAGE, AND HANDELING. ACCEPTABLE
CONTAINERS ARE AS FOLLOWS:
(A) PPP-B-621, NAILED WOOD BOX, OVERSEAS TYPE;
(B) PPP-P-601, CLEATED PLYWOOD BOX, OVERSEAS
OVERSEAS TYPE.
QUANTITY OF UNIT PACKAGES IN A SHIPPING
CONTAINER SHALL BE AT CONTRACTOR'S DISCRETION.
HOWEVER, STACKING OF CONTAINERS SHALL NOT
EXCEED THE FIBERBOARD CONTAINER'S PERFORMANCE
CAPABILITIES TO ENSURE PRODUCT QUALITY
THROUGHOUT THE DISTRIBUTION CYCLE.
.
11. SPECIAL NOTES:
(A) WHEN THE UNIT IS PACKAGED AS A SET,
ASSEMBLY, BOX, OR QUP GREATER THAN ONE, EACH
ITEM SHALL BE WRAPPED AND CUSHIONED TO PREVENT
DIRECT SURFACE CONTACT WITH THE SURFACE OF THE
ADJACENT PARTS.
(B) UNDER NO CIRCUMSTANCES SHALL ANY
MIL-STD-129 MARKINGS/LABELS BE APPLIED TO THE
BARE ITEM.
(C) BULK PACKAGING IS NOT ACCEPTABLE. THIS
PACKAGING TECHNIQUE CREATES A PERMANENT
DEFORMATION TO THE ITEM.
(D) METAL STRAPPING SHALL NOT BE APPLIED
DIRECTLY TO BEARING STAVES, SINCE IT CREATES
PRODUCT DEFORMATION.
(E) TO REDUCE TARE AND CUBE, EXCESSIVE USE OF
CUSHIONING WITHIN THE UNIT CONTAINER SHALL BE
AVOIDED.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKING OF (RUBBER) BEARING
STAVES REVISION A DATED 00279
.
SCOPE: THIS SPECIAL PACKAGING INSTRUCTION
DETAILS THE PROCEDURE FOR CLEANING,PRESERVATION
PACKAGING, AND PACKING OF (RUBBER) BEARING
STAVES INDENTIFIED UNDER MIL-DTL-2845E.
.
1. QUANITY UNIT PACK (QUP): ITEM IS CONSIDERED
TO BE A REPAIR PART AND SHALL BE PACKAGED ONE
PART PER UNIT PACKAGE, EXCEPT ALL THE PARTS
COMPRISING A SINGLE SET, ASSEMBLY, BOX, OR
MULTIPLE QUP SHALL BE PACKAGED TOGETHER.
UNIT OF ISSUE OR MULTIPLE QUPS SHALL DETERMINE
IF THE ITEM SHALL BE PACKAGED UNDER THE
PACKAGING REQUIREMENTS SPECIFICALLY DESIGNATED
FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUPS.
.
2. METHOD OF PRESERVATION: THE METHOD OF
PRESERVATION UTILIZED FOR ALL LAMINATED PHENOLIC
OR RUBBER, BRASS BACKED BEARING STAVES SHALL BE
METHOD "10" (PHYSICAL AND MECHANICAL PROTECTION)
I/A/W WITH MIL-STD-2073 (LATEST REVISION).
.
3. CLEANING: EACH ITEM SHALL BE CLEANED AND
DRIED BY ANY SUITABLE PROCESS OR PROCESSES,
WHICH ARE NOT INJURIOUS TO THE ITEM.
.
4. PRESERVATIVE MATERIAL: NO PRESERVATIVE
REQUIRED.
5. WRAPPING: TO PROTECT ITEMS FROM DIRECT
EXPOSURE TO SUNLIGHT AS SPECIFIED MIL-DTL-2845E,
TABLE I, NOTE 1-EACH ITEM SHALL BE INDIVIDUALLY
COVERED WITH AN OPAQUE OR KRAFT WRAPPING PAPER
IN ACCORDANCE WITH A-A-203, TYPE AND STYLE ARE
OPTIONAL. WRAPPING MATERIAL SHALL SNUGGLY
ENCLOSE THE ITEM AND BE SECURED WITH TAPE TO
PREVENT UNINTENTIONAL UNWRAPPING.
UNDER NO CIRCUMSTANCES SHALL ANY TAPE BE APPLIED
TO THE BARE ITEM. (SEE SPECIAL NOTE 11(A) FOR
SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUANTITY
UNIT PACKS).
.
6. CUSHIONING: (FOR SETS, ASSEMBLIES, BOXES OR
MULTIPLE QUPS ONLY):
ITEMS SHALL BE CUSHIONED TO PREVENT DAMAGE.
CUSHIONING MATERIAL USED WITHIN THE UNIT PACK
SHALL CONFORM TO ANY OF, COMBINATION OF, THE
FOLLOWING SPECIFICATIONS, AT THE CONTRACTOR'S
OPTION, WHICH WILL PROVIDE THE REQUIRED
PROTECTION (SEE SPECIAL NOTE 11(A) FOR SETS,
ASSEMBLIES, BOXES, OR MULTIPLE QUPS):
.
A. A-A-1898 (CELLULOSIC)
B.PPP-C-1120, CLASS A, GRADE 1, TYPE OPTIONAL
(BOUND FIBER)
C. A-A-203 (PAPER, KRAFT, UNTREATED)
D. MIL-B-3106 (BOARD, COMPOSTION,
WATER-RESISTANT, SOLID)
E. MIL-R-5001, GRADE A, TYPE AND CLASS OPTIONAL
(RUBBER, LATEX FOAM)
F. MIL-R-6130, GRADE A (RUBBER, CELLULAR)
G. MIL-R-20092, CLASS 5 (RUBBER SHEETS AND
ASSEMBLED AND MOLDED SHAPES, CELLULAR,
SYNTHETIC, OPEN CELL)
7. UNIT CONTAINERS:
A. FOR UNIT OF ISSUE OF "EA" (EACH):
(1) AFTER ITEM IS INDIVIDUALLY WRAPPED IN
ACCORDANCE WITH STEP 5, EACH ITEM SHALL BE
PLACED IN AN ASTM D5118, TYPE CF, CLASS
WEATHER-RESISTANT SINGLEWALL FIBERBOARD
CONTAINER, PREFERABLY A REGULAR SLOTTED
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
CONTAINER (RSC) END-LOADING. SELECTION OF
CONTAINER (W5C, W6C, OR V3C) SHALL BE IN
ACCORDANCE WITH SIZE AND WEIGHT LIMITATIONS OF
ASTM D5118.
.
(2) MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR METALS
FASTENERS MAY CAUSE DAMAGE TO THE ITEM.
.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
B. FOR UNIT OF ISSUE OF "SE" "AY" OR "BX" (SET,
ASSEMBLY, BOX) OR MULTIPLE QUPS:
.
(1) AFTER EACH ITEM OF THE SET, ASSEMBLY, BOX,
OR MULTIPLE QUP IS WRAPPED AND CUSHIONED IN
IN ACCORDANCE WITH STEPS 5 AND 6, THE ITEMS
SHALL BE PLACED TOGETHER IN ONE OF THE UNIT
CONTAINERS SPECIFIED BELOW (SELECTION OF
CONTAINER SHALL BE IN ACCORDANCE WITH
SIZE AND WEIGHT LIMITATIONS OF SPECIFICATION):
(A) ASTM D5118, TYPE CF, CLASS WEATHER-RESISTANT
DOUBLEWALL CORRUGATED FIBERBOARD BOX (W5C, W6C,
OR V3C);
(B) FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE
QUPS WEIGHING MORE THAN 60 POUNDS, THE UNIT
CONTAINER SHALL BE THE SAME AS THE SHIPPING
CONTAINER AS CITED IN STEP 10.
FIBERBOARD CONTAINERS:
(2) THE MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR
METALS FASTENERS MAY CAUSE DAMAGE TO ITEM.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
8. MARKING: MARKING SHALL BE IN ACCORDANCE WITH
MIL-STD-129 (LATEST REVISION).
ALL UNIT CONTAINERS SHALL BE MARKED WITH SPECIAL
MARKING CODE 20-"DO NOT BEND." WHEN APPLICABLE,
SHELF LIFE MARKINGS SHALL BE APPLIED TO THE UNIT
CONTAINER (I.E. TYPE I OR TYPE II).
.
9. PACK/PACKING LEVEL: THE PACK AND PACKING
LEVELS SHALL BE AS SPECIFIED IN THE CONTRACTUAL
AGREEMENT AND IN ACCORDANCE WITH STEP 10.
10. SHIPPING CONTAINERS: ALL PACKAGED RUBBER
BEARING STAVES SHALL BE OVERPACKED IN WOODEN
BOX TO ENSURE ITEM IS NOT DAMAGED DURING
SHIPPING, STORAGE, AND HANDELING. ACCEPTABLE
CONTAINERS ARE AS FOLLOWS:
(A) PPP-B-621, NAILED WOOD BOX, OVERSEAS TYPE;
(B) PPP-P-601, CLEATED PLYWOOD BOX, OVERSEAS
OVERSEAS TYPE.
QUANTITY OF UNIT PACKAGES IN A SHIPPING
CONTAINER SHALL BE AT CONTRACTOR'S DISCRETION.
HOWEVER, STACKING OF CONTAINERS SHALL NOT
EXCEED THE FIBERBOARD CONTAINER'S PERFORMANCE
CAPABILITIES TO ENSURE PRODUCT QUALITY
THROUGHOUT THE DISTRIBUTION CYCLE.
.
11. SPECIAL NOTES:
(A) WHEN THE UNIT IS PACKAGED AS A SET,
ASSEMBLY, BOX, OR QUP GREATER THAN ONE, EACH
ITEM SHALL BE WRAPPED AND CUSHIONED TO PREVENT
DIRECT SURFACE CONTACT WITH THE SURFACE OF THE
ADJACENT PARTS.
SPE7M0-26-Q-1149
SECTION B
SUPPLY/SERVICE: 2010-01-209-9650 CONT'D
(B) UNDER NO CIRCUMSTANCES SHALL ANY
MIL-STD-129 MARKINGS/LABELS BE APPLIED TO THE
BARE ITEM.
(C) BULK PACKAGING IS NOT ACCEPTABLE. THIS
PACKAGING TECHNIQUE CREATES A PERMANENT
DEFORMATION TO THE ITEM.
(D) METAL STRAPPING SHALL NOT BE APPLIED
DIRECTLY TO BEARING STAVES, SINCE IT CREATES
PRODUCT DEFORMATION.
(E) TO REDUCE TARE AND CUBE, EXCESSIVE USE OF
CUSHIONING WITHIN THE UNIT CONTAINER SHALL BE
AVOIDED.
FREIGHT FORWARDER:
PEG00L
AMENTUM WAREHOUSE
5160 LAD LAND DRIVE
FREDERICKSBURG, VA 22407
US
FREIGHT SHIPPING ADDRESS:
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
MARKFOR
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
M/F: (TCN) PEGA5N52216991
RDD:
PROJ: TP 1
SUPP ADD: PALGKB SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: 2L FC: 48
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7015391619 0001 N/A N/A N/A 02/06/2026
0002 7017009273 0001 N/A N/A N/A 06/04/2026

SPE7M0-26-Q-1149 NSN/Part Number: 2010-01-209-9650 Quantity: 24 EA Purchase Request: 7015391619QTY: 24 Delivery: 30 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2849
The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12VH
The contract pertains to the procurement of 161 units of a BUSHING,SLEEVE with NSN/Part Number 0001S00000052, under solicitation SPE4A6-26-T-12VH, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 403 days after contract award, and the place of performance is Robins AFB, Georgia. The solicitation closes on August 13, 2026, and is subject to technical and quality requirements referenced from the DLA Master List, with applicable revisions governed by the solicitation or award date depending on acquisition size. Packaging must comply with DLA specifications, and inspection and acceptance are to occur at the origin. Government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DLA training, and formal authorization. The contract is classified as a government first artic solicitation with no set-aside designation and falls under NAICS code 332991. Primary point of contact is Charleen Weber, reachable via email and phone as listed.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-12UL
The contract is for one BUSHING, SLEEVE with NSN 3120-01-433-2912 and part number 214-010-264-103, sourced from BELL TEXTRON INC, under solicitation SPE4A6-26-T-12UL. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and both inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129 with no special marking required. The item is destined for the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City, Taiwan, with freight forwarding details governed by DLA procedural notes. Technical and quality requirements are incorporated by reference from the DLA Master List, including tailored higher-level quality, inspection at origin, and measuring and test equipment standards. Item Unique Identification is not required per the requesting service’s directive. The delivery date is August 7, 2026, with the contract issued under DLA’s authorized unit of issue and subject to applicable DoD procurement rules.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-12UD
This contract solicits the procurement of an annular ball bearing under NSN 3110005299144 with a requirement for 39 units, to be delivered within 170 days FOB origin. The bearing must be manufactured exclusively in the United States, its outlying areas, or Canada, and the combined cost of its core components—rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50 percent of the total component cost. Contractors must submit a formal declaration affirming the domestic or foreign origin of materials, obtained via the designated DLA Foreign Bearing website, and failure to provide this documentation will disqualify the quote. If no compliant offers are received, the solicitation may be canceled or held pending a waiver request under DFARS provisions. Technical and quality standards are governed by MIL-DTL-197M for preservation and packaging, MIL-STD-2073-1E for packaging methods, and MIL-STD-129 for marking, with all packaging subject to DLA-specific requirements and inspection occurring at origin. The item is classified as a critical application item with specific physical marking requirements per TDP Rev A Gen 1 and QAP-13873, and mercury or mercury-containing compounds are strictly prohibited except in limited functional applications defined by NAVSEA, requiring secondary containment for portable devices. Unit of issue is each, price is $39.00 per unit, with zero variance allowed in quantity and no unique identification marking required per customer request. The solicitation number is SPE4A6-26-T-12UD, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of August 13, 2026, and is classified under NAICS code 332991. The place of performance is New Cumberland, PA, and all documentation must align with the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The contracting officer point of contact is Shalonda Davis, and the contract is subject to applicable defense information handling requirements. Preservation, packing, and labeling procedures must strictly follow referenced military standards, and the contractor’s packaging facility must pass quality assurance verification per MIL-DTL-197M Section 4.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
FILTER, LIGHT, PHOTOG
Solicitation # SPE8EN-26-T-2776
The contract pertains to the procurement of a photographic light filter with NSN 6760-01-519-0757 and part number 2602A001, supplied by Canon U S A Inc, Camera Division. A total of 33 units are required at a unit price of $33.00, resulting in a total contract value of $1,089.00. Delivery is to be made FOB origin within 167 days, with the original required delivery date set for December 23, 2026, and a need ship date of February 1, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 Packaging Requirements, and all technical and quality standards referenced by R or I numbers take precedence over applicable material specifications. The DLA Master List of Technical and Quality Requirements governs compliance, and the item does not contain Class I ozone-depleting substances. The delivery address is W1A8 DLA Dist San Joaquin, Tracy, CA, and transportation requirements must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE8EN-26-T-2776, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332991, and all documentation must reference the authorized unit of issue as defined by DoD standards.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, SELF
Solicitation # SPE4A6-26-T-12VF
The contract is for the procurement of three roller self-bearing units with NSN part number 3110-01-285-9246 under solicitation SPE4A6-26-T-12VF, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 205 days of award, and the solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The item is classified under NAICS code 332991 and is subject to stringent quality and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or their corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major unless otherwise directed. Inspection and acceptance occur at the manufacturer’s origin, and all measuring and test equipment must meet specified standards. The technical data associated with this bearing is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to the data is restricted to contractors holding current US/Canada Joint Certification Program certification, having completed mandatory DOD export-controlled data training and the DLA questionnaire, and been formally approved by the DLA controlling authority. Government identification must be removed from non-accepted supplies, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is NEW CUMBERLAND, PA, 17070-5002, with Katelyn Williams listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC EQUI
Solicitation # SPE8EN-26-T-2784
The contract pertains to the procurement of 22 units of photographic equipment cases under NSN 6760-01-593-2457, with a purchase request number of 7017757373 and a delivery deadline of 167 days after award. The solicitation number is SPE8EN-26-T-2784, issued on August 5, 2026, with responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and documentation for source approval requests is required. The item does not contain Class I ozone-depleting substances, and covered defense information may apply. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the contracting officer is Jennifer Esworthy, reachable via email or phone provided. The NAICS code is 332991, and the procuring agency is the Department of Defense under the Construction & Equipment T & IFO EQ office.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRF
Solicitation # SPE4A5-26-T-331L
This solicitation requires the procurement of a roller bearing designated as BEARING, ROLLER, AIRF with NSN 3110-01-662-3661, with a total quantity of nine units to be delivered within 154 days. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, and the cost of all bearing components—including rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50% of the total component cost, as mandated by DFARS Clause 252.225-7016. A completed Contractor’s Declaration, obtainable from the DLA Foreign Bearing Waiver website, is mandatory for consideration; failure to submit this documentation will disqualify the quote. In the event no compliant offerings are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. The item is designated as a Critical Application Item and must comply with Federal Aviation Administration airworthiness requirements, including the submission of a Certificate of Airworthiness and Conformance. Technical and quality requirements are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Packaging and preservation must adhere strictly to MIL-STD-2073-1E and MIL-DTL-197M, with specific preservation methods determined by bearing type and closure, and protective compounds selected according to prescribed tables. Marking must follow MIL-STD-129, and palletization must comply with DLA packaging standards. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Supply chain traceability documentation is required as per DLA Directive Procurement Note C03, and contractors must retain all related records. Configuration change management, removal of government identification from non-accepted items, and FAA bare item marking requirements are also applicable. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The unit of issue is each, with a total price of $9.00 per unit, and the order is being procured by the Department of Defense under Solicitation SPE4A5-2
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-12VL
The contract solicits 42 flanged bushing sleeves identified by NSN 3120-00-857-9742 under solicitation SPE4A6-26-T-12VL, with a response deadline of August 13, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior approval from the Department of State or Commerce, and DFARS 252.225-7048 applies to all handling of the technical data. Contractors must hold approved US/Canada Joint Certification Program status, complete mandatory DOD export control training, and be authorized by DLA to access controlled information. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. The acquisition falls under NAICS code 332991 and is managed by the Department of Defense’s ASC Commodities Division, with primary point of contact Kameron Heningburg.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12VJ
The contract pertains to the procurement of 16 units of a bushing sleeve with NSN/Part Number 0001S00000052, under solicitation SPE4A6-26-T-12VJ, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 395 days after award, and the item is subject to multiple technical, quality, and regulatory requirements, including those detailed in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The specification incorporates tailored higher-level quality standards applicable to both manufacturers and non-manufacturers, inspection and acceptance at the origin, and mandatory compliance with DLA packaging guidelines. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce; only contractors certified under the US/Canada Joint Certification Program and who have completed mandated DLA training may access this data. Item Unique Identification is not required per the service customer’s request, and government identification must be removed from non-accepted supplies. The place of performance is Robins AFB, Georgia, with Charleen Weber as the primary point of contact, and responses are due by August 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 423510
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1147
This contract specifies the procurement of cold-rolled low-carbon steel strip, compliant with ASTM A109/A109M and SAE AMS2807C standards, measuring 0.0625 inches thick by 3 inches wide, in whole-foot lengths between 8 and 16 feet, with a weight of 0.638 pounds per foot and Edge Type No. 2. The material must be supplied as stripped metal with continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings are required to be legible, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. A complete Certificate of Quality Compliance, or mill certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes a non-compliant bid with potential criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special codes Z and ZZ for preservation and labeling. All items must be shipped in full-foot increments only, and shipments must exclude parcel post, using instead the fastest traceable freight method to the designated Puget Sound Naval Shipyard address. The contract is a firm-fixed-price agreement with zero variance allowance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 30 days after award, and all technical data, including the CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. Failure to meet any specification, including packaging, marking, or material certification, is grounds for rejection.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M0-26-T-031K
This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, with a unit of issue of 1 RO equaling 108 feet, for a total quantity of 1,200 ROs. The item is classified as a commercial item and carries a shelf life of 12 months from manufacture, non-extendable, unless stored under controlled conditions of 50°F to 80°F and less than 75% relative humidity, in which case it may be inspected and re-certified up to a maximum of five years. It is designated as hazardous under HMIC code P, requiring full compliance with Safety Data Sheet (SDS) submission standards including hazard labels and a completed transmittal form to dscrchempol@dla.mil. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with palletization conforming to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise directed; unspecified attributes are treated as major. The tape must qualify under QPL-19166-30 revision 30 and comply with all referenced technical and quality requirements from the DLA Master List. Delivery is FOB origin with a five-day delivery window to Pearl Harbor Naval Shipyard, Hawaii, and requires full compliance with DLA procurement notes for transportation and freight. The NSN is 5970-00-612-8492 with a required delivery date of July 31, 2026, and all documentation must reflect current DLA unit of issue and marking specifications.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M0-26-T-031Q
This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE7M0-26-T-031L
The contract pertains to the procurement of 8 machine bolts, identified by NSN 5306-01-507-7094 and part number 60-01-3745A, issued under solicitation SPE7M0-26-T-031L by the Department of Defense’s Maritime Supply Chain ESOC. Delivery is required within five days of award, FOB origin, with strict zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards, including ASTM D3951 and MIL-STD-129 for packaging and marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The bolts must be physically marked per DLA requirements and packaged per RP001 with palletization adhering to DLA packaging directives. Delivery must be shipped via traceable freight to the Puget Sound Naval Shipyard in Bremerton, WA, with parcel post explicitly prohibited. The required delivery date is July 31, 2026, and the contract mandates full adherence to configuration change management and variance procedures. The supplier is identified as Electric Boat Corp or BEK, Inc., both listed under the same part number.
Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-031N
This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
CORD, ELECTRICAL
Solicitation # SPE7M0-26-T-031J
The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.
Saw Blade and Handtool Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1148
The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).
Rolled Steel Shape Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M0-26-T-031M
The contract is for one unit of an elbow fitting, specifically a pipe to tube component identified by NSN 4730-01-299-7309 and part number 16-12CTX-B from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-031M. Delivery is required within five days of award, with shipment to be made FOB origin in accordance with strict packaging standards including ASTM D3951 and MIL-STD-129 labeling, while adhering to DLA’s Master List of Technical and Quality Requirements which override any conflicting specifications. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must comply with DLA’s procurement guidelines including palletization standards, and the unit of issue is a single ea with no tolerance for quantity variance. Delivery destination is the Marine Wing Support Squadron 272 in Jacksonville, North Carolina, with all shipments required to use the fastest traceable transport method, explicitly prohibiting parcel post. The original required delivery date is July 24, 2026, and all government-specific identifiers, including the project code TP 1 and freight tracking number, must be accurately applied to the shipment.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
NUT, HOSE COUPLING
Solicitation # SPE7M0-26-T-031P
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Material Compliance & PackagingThe contract requires strict adherence to hazardous material handling protocols for capacitors, mandating accurate labeling, secure packaging, and comprehensive documentation to meet both OSHA and military standards. All compliance activities must ensure the safe identification and transport of hazardous components, with no room for deviation from established regulatory frameworks. The work is performed under a subcontract arrangement tied to the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS entity, with performance obligations centered in Norfolk, Virginia, at the ZIP code 23511-4397. Responses to this solicitation must be submitted by August 17, 2026, and the procurement falls under NAICS code 562910, indicating it relates to hazardous waste collection and treatment services. There is no set-aside designation specified, meaning all eligible contractors may compete. The posting date is August 4, 2026, suggesting a brief but critical window for qualified vendors to prepare and submit their proposals. Failure to meet the specified compliance requirements could result in rejection or non-performance penalties, making precision in labeling and documentation non-negotiable elements of fulfillment.
Remediation Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334416
New
DIBBS
Procurement of Fixed Ceramic Dielectric CapacitorThe contract pertains to the procurement of a single fixed ceramic dielectric capacitor intended for deployment in defense and aerospace applications, requiring strict adherence to military specifications and packaging standards to ensure reliability under extreme operational conditions. This is a subcontract under the Department of Defense, managed by the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance obligations centered in Norfolk, Virginia, at the zip code 23511-4397. The item falls under NAICS code 334416, classifying it within the electronic component manufacturing sector, and must meet all relevant defense-grade quality and testing requirements. Bidding is open under a solicitation process with a posted date of August 4, 2026, and responses must be submitted no later than August 17, 2026. The contract does not include a set-aside designation, meaning it is open to all eligible contractors without restrictions based on business size or socioeconomic status. There is no designated point of contact listed, and all inquiries should be directed through the official DIBBS platform using the provided uiLink. The capacitor must be fully compliant with applicable military standards for performance, environmental resilience, and packaging to ensure seamless integration into critical systems.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 483212
New
DIBBS
Expedited International Freight and Logistics (FOB Origin to Japan)
Inland Water Passenger Transportation

POSTED

1 day ago

DEADLINE

in 12 days
View Details