Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

BEARING, WASHER, THRU

Awarded
SPE4A6-26-T-151PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE4A626P8314 to ARGO TURBOSERVE CORPORATION with a CAGE code of 7Y333 for a total price of $43,301.52, with an award date of July 17, 2026, under Solicitation SPE4A6-26-T-151P. The contract pertains to the procurement of a single line item: BEARING, WASHER, THRU, identified by NSN 3120013799789 and PR 7014629642, with no specified quantity or unit price broken out in the documentation. Performance is to occur at the contractor’s location in Virginia Beach, Virginia, and the award appears to have been made on a lowest-priced technically acceptable basis due to the low dollar value and absence of technical evaluation criteria in the available records. The contract includes the mandatory clause FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, which was implemented via Deviation 2026-00040 and incorporated into the contract through Modification P00001, requiring the contractor to prohibit discriminatory DEI practices, flow the clause down to all applicable subcontracts, report violations by subcontractors, and comply with government requests for records. No other technical specifications, inspection criteria, packaging standards, or quality control requirements are detailed in the provided documentation, nor are any military standards such as MIL-STD-129 or MIL-STD-2073 referenced. The contracting officer is Dean Allen, reachable via CARL.ALLEN@DLA.MIL, with no designated COR or COTR identified. Payment office details, accounting data (AAC, TAS, ACRN), invoicing method, and delivery schedule remain unspecified; the contract does not include option periods, security clearance requirements, key personnel designations, or organizational conflict of interest provisions. The contractor must affirmatively comply with DEI-related reporting obligations and maintain compliance as a condition of contract performance, but no socioeconomic certifications, size status representations, or other affirmative claims were submitted or documented. The contract is executed under administrative modification procedures and is subject to standard DLA acquisition flow and oversight, though critical logistical and compliance details may reside in unprovided supplemental documentation.

General Info

ARGO TURBOSERVE to supply bearing NSN 3120013799789 for $43,301.52 under DLA contract awarded July 17, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$43,301.52

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

Argo Turboserve CorporationView Profile

Award Issued Date

Documents

(1)

SPE4A626P8314_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
DLA award SPE4A626P8314 posted on DIBBS. Awardee: ARGO TURBOSERVE CORPORATION (CAGE 7Y333) Total Contract Price: $43,301.52 Award Date: 07-17-2026 Solicitation: SPE4A6-26-T-151P Line items: - BEARING, WASHER, THRU (NSN/Part 3120013799789, PR 7014629642)

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
Federal
31--CB ROTATING ASSY
Solicitation # SPRMM126QKG47
The contract is for the sole-source procurement of 16 units of the CB ROTATING ASSY (NSN 1H-3120-014828716, P/N 4D09668-004) from Northrop Grumman Systems Corporation (CAGE 90099), the only approved source of supply, as determined by market research showing it is uneconomical to acquire technical data rights or reverse engineer the part. The acquisition is conducted under FAR 6.302-1, with no competition planned, although responsible sources may submit capability statements within 45 days of the presolicitation notice for the government’s consideration. The item is not being acquired under FAR Part 12 despite commercial item inquiries, indicating non-commercial technical specifications apply. Deliveries are to be split between two DLA distribution centers: W25G1U in New Cumberland, PA, and W62G2T in Tracy, CA. Packaging, preservation, and marking must comply with applicable military standards such as MIL-STD-129 and MIL-STD-2073, though exact details are to be obtained from DODSSP or ASSIST-Online. The government will conduct inspection and acceptance, with FOB Origin and origin-based inspection under consideration, and no formal COR or COTR is identified, with Jennifer Elliott of DLA Mechanicsburg serving as the primary point of contact. The solicitation, SPRMM126QKG47, is a small business set-aside with no specific contract type listed, and vendors are requested to indicate their ability to provide cost or pricing data, commercial warranties, and willingness to accept up to four option years. All responses must be submitted electronically by September 21, 2026, to the specified email, with PDF being the preferred format, and no formal contract clauses or line-item pricing details are provided in the documentation.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
Federal
LOWER BEARING ASSY
Solicitation # N0010426QYA7K
This contract is for the manufacture and delivery of the Lower Bearing Assembly #1, a specialized component for use on U.S. Navy submarines, under a 100% small business set-aside solicitation identified as N0010426QYA7K. The requirement demands strict adherence to specific engineering drawings and a comprehensive set of technical standards including MIL-STD-973, MIL-STD-130N, MIL-STD-2035A, ISO 9001, ISO/IEC 17025, and multiple NAVSEA technical publications. The contractor must implement a robust quality inspection system, submit and obtain prior government approval for detailed test plans, welding procedures, nondestructive testing protocols, and first article inspection reports. All production units require 100% dimensional and nondestructive inspection, including visual and liquid penetrant testing of welds, thread inspections to ASME B1.3 systems, and certification of material composition through mill reports. Each component is subject to permanent marking per MIL-STD-130 with traceability by heat, lot, batch, and serial number. The contract requires full documentation of objective quality evidence for all materials and processes, including certified mill data, weld rod certifications, heat treatment records, material compliance certificates, and welder and inspector qualification records. Mercury contamination is strictly prohibited, and any use of mercury or mercury-bearing materials requires explicit written approval from the Procurement Contracting Officer with detailed protective measures and warning labeling. All deliveries must be accompanied by a Mercury Exclusion Certification. The contract uses FOB destination terms, requires electronic submission of invoices and receiving reports through WAWF/IRAPT, and sets a 1-year warranty after delivery with a 45-day defect discovery window. The Naval Surface Warfare Center, Philadelphia Division (NSWCPD), serves as the accepting activity with DODACC N64498 and is responsible for reviewing and approving all contractual data items, technical submissions, and final inspections. The government reserves the right to inspect at any point during manufacturing, and contract compliance is mandatory throughout the supply chain, including subcontractors. The solicitation closes on July 30, 2026, with evaluation based on balanced consideration of price and non-price factors such as delivery lead time and verified past performance.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 332991
New
Federal
BEARING,ROLLER,NEEDLE
Solicitation # SPE4A626Q1293
The U.S. Department of Defense, through DLA Aviation, is conducting market research under solicitation number SPE4A626Q1293 to identify potential sources for the Needle Roller Bearing identified by NSN 3110-00-455-6188, with approved CAGE codes for RBC Bearings Incorporated, Leonardo Spa Helicopters Division, and Industrial Tectonics Bearings. This is a sources-sought notice, not a formal solicitation or procurement action, and is intended to gather information on manufacturers capable of supplying the item, which is classified as commercial and will be acquired under FAR 13.5 procedures. Respondents are requested to submit manufacturer details including CAGE codes, part numbers, production locations, and points of contact voluntarily, with no formal proposals or pricing required at this stage. The notice does not commit the government to award a contract, nor does it contain evaluation criteria, contract clauses, or binding terms. The requested item is specified with a QCC of QCJ, requires Contractor First Article Testing, and has a projected delivery timeline of 350 days after receipt of order. All supply must originate from approved manufacturers and be delivered FOB Origin with inspection and acceptance also occurring at origin, with first destination transportation applying. The solicitation is open to surplus dealers, small business dealers, and distributors who can provide either government surplus material with a completed DLAD 52.211-9000 certificate or adequate traceability documentation. Responses must be submitted via email to Matthew Diefes at matthew.diefes@dla.mil by August 26, 2026, with no formal submission portal or structured format required. The contracting office is located in Richmond, Virginia, with no specified contract value, invoicing procedures, packaging requirements, or COTR/COR assigned since this action is purely for market research purposes under FAR 12 and 13.5, and no formal competitive award will result from this notice.
DLA Aviation

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 332991
New
Federal
BALL, SCREW ASSEMBLY
Solicitation # SPMYM326Q8023
This solicitation, identified as SPMYM326Q8023, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information posted exclusively on SAM.gov. The requirement is for two Ball, Screw Assemblies, specifically OEM part number B15125C Rev-D manufactured by Beaver Aerospace & Defense Inc., furnished as a fully machined and assembled unit in compliance with proprietary technical data. This is a sole-source procurement due to the proprietary nature of the drawing and OEM status, and quotations from any other manufacturer will be rejected outright. Offerors must be registered and active in SAM.gov, possess a valid CAGE code, and submit complete responses via email to sam.j.aiguier.civ@us.navy.mil and DLA-KME-QUOTATIONS@DLA.MIL by the deadline of July 28, 2026, at 12:00 PM EST. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with technical acceptability determined by strict adherence to specifications, including the requirement for quality certifications, test results, and supply chain traceability documentation. Responsibility screening will be conducted through PPIRS and FAR 9.104 criteria. All respondents must complete and include with their offer the signed Security Agreement for Protection of Naval Nuclear Propulsion Information and DD Form 2345 to obtain proprietary drawings. Proposals must include pricing, FOB Destination terms, business size under NAICS 332991, and payment preference between Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). If GCPC is selected, a receiving report must be submitted via WAWF. Offerors not the original manufacturer must disclose the manufacturer’s name, location, and business size. The contract incorporates a comprehensive array of FAR, DFARS, DLAD, and local clauses related to cybersecurity (including NIST SP 800-171 and DFARS 252.204-7012), prohibitions on covered telecommunications equipment, trafficking in persons, labor standards, environmental controls, Buy American restrictions, and export control requirements. Items must be delivered to Kittery, Maine, by September 28, 2026, with inspection and acceptance occurring at destination per QA-4 terms and constructive acceptance extended to 45 calendar days. Packaging must conform to
DLA Maritime - Portsmouth

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency