Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, WASHER, THRUST

Active
SPE4A6-26-T-20XSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Defense Logistics Agency involves the procurement of 28 thrust washer bearings under NSN 3120-01-517-4902. The contract is issued by the ASC Commodities Division of the Department of Defense, with a delivery requirement of 168 days after the delivery order date. Key compliance mandates include Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and strict adherence to physical identification and bare item marking protocols. While Item Unique Identification is waived per the service customer's request, the procurement is subject to specific DLA packaging and tailored higher-level quality requirements, including inspection and acceptance at the origin. The contract carries significant regulatory weight regarding data security and international trade. Covered defense information is applicable, and the technical data associated with this item is subject to export controls under either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Consequently, contractors must possess approved US/Canada Joint Certification Program certification and complete required training to access and handle export-controlled technical data. All technical and quality requirements are governed by the DLA Master List, with specific provisions for the handling of non-accepted supplies and the removal of government identification.

General Info

DLA procurement of 28 thrust washer bearings requiring CMMC Level 2 and export compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

213113 - Support Activities for Coal MiningView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-20XS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Stephanie Cruz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,WASHER,THRUST
BEARING, WASHER, THRUST
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-01-517-4902 Quantity: 28 EA Purchase Request: 7017916793QTY: 28 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L3-26-T-206T
This contract is for the procurement of one mounting bracket, identified by NSN 5340-01-523-1678, under solicitation number SPE7L3-26-T-206T. The item must be delivered within five days of order to Joint Base Lewis McChord, Washington. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, the removal of government identification from non-accepted supplies, and the prohibition of Class I ozone-depleting chemicals. The contractor must adhere to specific technical data packages and Army drawings, utilizing DCSC drawing 16236 CS-2300-0001 for chemical agent resistant coatings where applicable. Quality assurance involves inspection and acceptance at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies specialty metal requirements per DFARS regulations and requires marking and labeling in accordance with MIL-STD-129.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

in 13 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-18FR
Solicitation SPE4A6-26-T-18FR is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 48 sleeve bearings. The required items are identified by NSN 3120013681691 and RIX Industries part number A181-B7609. This is a small business set-aside under NAICS code 213113. The items are designated as critical application items and must be delivered within 171 days after the order is placed, with shipping terms set as FOB Origin. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems. Key requirements include physical identification and bare item marking per RQ017, and a prohibition on the intentional addition of mercury or mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. All quotes must be submitted via the DIBBS portal, and payment will be processed electronically through the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-951H
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of 42 retaining straps under NSN 5340-01-187-8830. The contract is identified as a commercial item procurement with a delivery requirement of 218 days after the order is placed. Performance is located in New Cumberland, Pennsylvania, and the request is managed under solicitation number SPE7L1-26-T-951H. The supplier must adhere to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. While the provided technical data may be incomplete, the delivered items must meet all cited technical data and part number requirements. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and specifies that certain data may be proprietary.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
SHAFT ASSEMBLY, FLEXIBL
Solicitation # SPE4A6-26-T-17LK
Solicitation SPE4A6-26-T-17LK is a request for quotations issued by the Department of Defense, ASC Commodities Division, for the procurement of 161 flexible shaft assemblies under NSN 6680007320561. The requirement is designated as a critical application item and must comply with MIL-DTL-10215P Revision P. Offerors must provide components from sources listed on the applicable Qualified Products List (QPL) or Qualified Manufacturers List (QML). The contract specifies a delivery timeframe of 171 days with terms set as FOB Origin, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement includes strict quality and packaging mandates, requiring adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Additionally, the solicitation explicitly excludes any items produced using additive manufacturing. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and electronic invoicing must be processed through the Wide Area Workflow (WAWF) system.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-22AE
This contract is for the procurement of 658 units of straight, headless pins, identified by NSN 5315-01-163-0703 and part number MS9390-800. The items are classified as critical application items and must adhere to SAE AS9390 Revision D and the DLA Master List of Technical and Quality Requirements. Delivery is required within 163 days, with a need ship date of February 12, 2027, and a final required delivery date of August 17, 2027. The contract specifies that inspection and acceptance will occur at the destination, while delivery is FOB Origin. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A7-26-T-687Q
This contract is for the procurement of 17 straight Headle pins, identified by NSN 5315-01-472-9592 and part number MS20253-3-0512L. The items must adhere to the SAE AS20253 Revision B standard and are designated as critical application items. Delivery is required within 20 days after the order, with a required delivery date of August 27, 2026. The shipment is FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract specifies that covered defense information may apply and mandates strict adherence to DLA packaging and palletization requirements for procurement.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
DIBBS
CLAMP, BLOCK
Solicitation # SPE7L1-26-T-990N
This solicitation, identified by number SPE7L1-26-T-990N, is issued by the Department of Defense Land Supply Chain for the procurement of one block clamp, part number 5340-01-369-7227. The contract requires adherence to specific DLA packaging requirements and incorporates technical and quality standards as defined in the DLA Master List. A critical environmental and safety mandate prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this contract, with specific exceptions for functional mercury used in batteries, sensors, or weapon systems as specified by NAVSEA. Any portable instruments containing mercury must be shockproof and feature a secondary containment boundary. The procurement is categorized under NAICS code 213113, with a delivery requirement of 20 days after delivery order. Interested parties must submit responses by the deadline of August 31, 2026. The place of performance is designated as FPO, and the primary point of contact for inquiries regarding this solicitation is Michael Nordahl. All technical revisions applicable to the acquisition will be governed by the version of the master list in effect on the solicitation or award date, depending on whether the acquisition is classified as simplified or large.
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
DIBBS
CHAIN AND PIN ASSEMBLY
Solicitation # SPE4A6-26-T-21AH
This contract, identified by solicitation number SPE4A6-26-T-21AH, is for the procurement of a single Chain and Pin Assembly, part number 50375-157, under NSN 5315-01-625-2996. The acquisition is managed by the ASC Commodities Division of the Department of Defense and requires delivery to Joint Base Lewis McChord, WA. The required delivery timeframe is 20 days, with the shipment designated as FOB Origin and inspection and acceptance occurring at the destination. The agreement incorporates strict technical and quality requirements, including adherence to DLA packaging standards and specific marking protocols under MIL-STD-129. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with defined verification levels for critical, major, and minor attributes. Packaging must comply with MIL-STD-2073-1E, and the shipment must be sent via the fastest traceable means, explicitly excluding the use of Parcel Post.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 213113
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-26-T-983A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two retaining straps under part number 5340-01-477-4056. The contract requires delivery within five days after receipt of the order, with performance located in Conneaut Lake, Pennsylvania. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the supplier must adhere to MIL-STD-130N for the identification marking of U.S. military property and comply with regulations regarding the removal of government identification from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
SLED
Soil Vapor Well InstallationThe City of Pittsburg seeks a subcontractor to install soil vapor wells to assess potential vapor intrusion risks and collect soil vapor samples for laboratory analysis. This effort is focused on evaluating subsurface vapor migration that could impact indoor air quality, typically in areas with historical industrial activity or contamination concerns. The work involves precise drilling and installation of monitoring wells designed to capture representative vapor samples from various depths, following industry-standard protocols to ensure data reliability and regulatory compliance. The contract is open to qualified vendors with experience in environmental site assessment and vapor intrusion investigations, and responses must be submitted by September 11, 2026. Performance of the work is required within the city limits of Pittsburg, California, with the zip code 94565, under the NAICS code 213113 for support activities for mining.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details
NAICS: 213113
SLED
Deeper-Zone Groundwater Monitoring Well InstallationThe contract involves drilling and installing deeper monitoring wells in Pittsburg, California, specifically to evaluate the vertical extent of groundwater contamination, with a focus on perchloroethylene (PCE). The work is critical for understanding how deeply and widely the contaminant has migrated below the surface, informing remediation strategies and long-term environmental management. This subcontract is part of an ongoing remediation effort by the City of Pittsburg and requires specialized drilling expertise to reach deeper aquifers without compromising the integrity of existing monitoring systems. The opportunity is open for response until September 11, 2026, with a posted date of August 4, 2026, and is classified under the NAICS code 213113 for drillers of oil and gas wells, indicating the technical nature of the drilling operations required. Performance of the work is strictly limited to the Pittsburg area with a zip code of 94565, and the project demands adherence to environmental standards and precise well construction protocols to ensure accurate data collection. There is no set-aside designation, and the contract does not specify a point of contact, requiring potential bidders to use the provided online link for further details and submission procedures.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details
NAICS: 213113
SLED
Shallow-Zone Groundwater Monitoring Well InstallationThe City of Pittsburg is soliciting a subcontract to install monitoring wells in shallow aquifers to support groundwater sampling for petroleum-hydrocarbon contamination analysis. The project requires the deployment of properly constructed wells to access and collect representative samples from near-surface groundwater zones, ensuring accurate detection and assessment of hydrocarbon pollutants. Work must be performed within the city limits of Pittsburg, California, with a zip code of 94565, and must adhere to industry standards for well construction, sampling protocols, and environmental compliance. The solicitation was posted on August 4, 2026, and requires responses to be submitted no later than September 11, 2026, at 9:00 PM. This procurement is classified under NAICS code 213113, which pertains to support activities for mining, indicating a focus on field-based environmental monitoring services. All contractors must be prepared to meet technical and regulatory requirements for groundwater sampling and well installation in this specific geographic area.
City of Pittsburg

POSTED

22 days ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-22RT
This contract is a solicitation for the procurement of 100 retaining rings under NSN 5325-00-944-8277. The requirement specifies several approved part numbers from Smalley Steel Ring Co, Spirolox Inc, and Hamilton Sundstrand Corporation. The delivery is required within 5 days after receipt of order, with FOB origin for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-130N for identification and MIL-STD-129 for marking. Logistics involve G&B Packing Company as the freight forwarder, with the final destination being the Government of Israel Ministry of Defense. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-22UY
This contract is for the procurement of 25 plain slotted hexagon nuts, identified by part number MS9364-16 and NSN 5310009436609. The items must adhere to SAE AS9364 standards with a thread class of 3B and are designated as critical application items. The hardware must be manufactured according to the current revision of the part standard, though previously manufactured stock meeting the then-current revision is acceptable. The agreement specifies a delivery timeframe of five days with FOB origin for both inspection and acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by specific DLA master list requirements, including tailored higher level quality requirements and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The final shipment is destined for the UH-60M Main Warehouse in Australia via a designated freight forwarder.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-22RB
This contract, solicitation number SPE4A6-26-T-22RB, is for the procurement of six blind rivets under NSN 5320-01-290-9684 for the Department of Defense ASC Commodities Division. The delivery requirement is set for 112 days after receipt of order, with the place of performance located at Hill AFB. The procurement is subject to specific DLA packaging, marking, and documentation requirements, including source approval requests and configuration change management. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, with specific AQLs assigned for critical, major, and minor attributes. While item unique identification is not required, the contract contains strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
Solicitation SPE4A6-26-T-17LV is a fixed-price request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 267 self-locking hexagon nuts under NSN 5310-00-982-5064. The items are to be delivered to DLA Distribution Jacksonville with a required delivery date of March 28, 2027, and a delivery period of 171 days. The procurement is fully competitive and requires hardware to be manufactured according to the current revision of the applicable part standard. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance are designated at the destination per FAR 52.246-2, though some provisions reference origin acceptance. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and identification marking must follow MIL-STD-130N. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on the use of mercury or mercury-containing compounds. Offerors must comply with the Buy American Act and Berry Amendment, providing disclosure for any non-domestic materials. The government will not evaluate offers utilizing additive manufacturing. Payment and receiving reports must be processed electronically via Wide Area WorkFlow. A price evaluation preference is available for certified HUBZone small businesses. Quotations were due by August 24, 2026, to the point of contact, Erin Edwards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
Solicitation SPE4A6-26-T-17YR is a request for quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 4,428 shear bolts, specifically part number NAS6604-5 under NSN 5306011308993. The items must be manufactured in accordance with the current revisions of NAS6603 through NAS6620 and NAS4002. Quality assurance requires that all Class 3A and 3B threads be inspected for dimensional conformance per System 22 of FED-STD-H28/20, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of February 23, 2027. Shipping is FOB Origin, with the destination for inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, while palletization must follow RP001. The contract incorporates various FAR and DFARS clauses, including restrictions on the use of additive manufacturing and a price evaluation preference for certified HUBZone small businesses. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
Solicitation SPE4A6-26-T-16SB is a Firm Fixed Price request for quotations issued by the Defense Logistics Agency's ASC Commodities Division for the procurement of three structural aluminum plates (NSN 1560-01-723-7586). The delivery is required within 198 days of the solicitation date, with the place of performance and delivery designated as the DDSP New Cumberland facility in Pennsylvania. The contract is governed by the DLA Master Solicitation Revision 05 and requires adherence to specific technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Compliance requirements include CMMC Level 2 cybersecurity standards, NIST SP 800-171, and electronic invoicing via the Wide Area Workflow system. Inspection and acceptance will occur at the destination, with quality assurance based on MIL-STD-1916 and ASME Y14.5M standards. Quotations must be submitted electronically through the DLA Internet Bid Board System by August 21, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A6-26-T-17YY
Solicitation SPE4A6-26-T-17YY is a total small business set-aside request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of nine dial indicating differential pressure gages, identified by NSN 6685-01-073-8428. The requirement specifies a delivery timeframe of 171 days after order, with an original required delivery date of January 14, 2027, and a need ship date of February 12, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking governed by MIL-STD-129. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Key material restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required and shock-proofed per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation is governed by NAICS code 334519 and incorporates various FAR and DFARS clauses, including cybersecurity reporting under DFARS 252.204-7012 and Buy American Act compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSION
Solicitation # SPE4A6-26-T-17MB
Solicitation SPE4A6-26-T-17MB is a Request for Quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 11 units of spring tension washers, identified by NSN 5310-01-445-1502. The delivery is set for 171 days after award, with a required delivery date of December 11, 2026, and a need ship date of February 12, 2027. Shipping is FOB Destination to DLA Distribution San Joaquin in Tracy, California. The procurement is not a small business set-aside and falls under NAICS code 332722. Notably, there is no approved technical data package available for this item as the data is either proprietary or insufficient for competitive procurement. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Preservation must follow ASTM D3951, and the use of mercury or mercury compounds in preservation, packaging, and marking is strictly prohibited. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, targeting zero non-conformances. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XV
Solicitation SPE4A6-26-T-17XV is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 103 blind rivets, identified by NSN 5320010422897. The items are critical application components that must be manufactured according to the current revisions of part standards NAS9310 and NAS1687. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of March 19, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must meet SAE AS9003 or ISO 9001 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance policy for sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. The solicitation is open to small businesses, with a specific price evaluation preference for certified HUBZone concerns.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17KC
Solicitation SPE4A6-26-T-17KC is a fixed-price request for quotations issued by the Defense Logistics Agency Aviation, ASC Commodities Division, for the procurement of 156 turnlock fastener studs under National Stock Number 5325-00-728-8500. The contract is managed under the First Destination Transportation program with delivery required within 84 days after receipt of the order, shipping FOB Origin to DLA Distribution Cherry Point, North Carolina. The procurement is categorized under NAICS code 332510 and requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific sampling plans based on MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and MIL-STD-129, with specific requirements for bare item marking and hazardous material labeling. Security and compliance obligations include CMMC Level 2 certification, NIST SP 800-171 assessment requirements, and strict export controls under ITAR and EAR. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors are encouraged to provide quantity ranges due to demand volatility and must comply with the Buy American Act and Berry Amendment.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-16UR
Solicitation SPE4A6-26-T-16UR is a request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 1,100 flat washers under NSN 5310-00-235-3544. The contract requires delivery to DLA Distribution San Diego, California, with a delivery timeframe of 107 days after receipt of order and shipping terms set as FOB Destination. The procurement is managed through the DLA Internet Bid Board System (DIBBS) and utilizes Wide Area WorkFlow (WAWF) for electronic invoicing. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key compliance mandates include the prohibition of intentionally added mercury, adherence to export control regulations (ITAR/EAR) via JCP certification, and the removal of government identification from non-accepted supplies. Inspection and acceptance are conducted by the government at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-22QV
This contract is for the procurement of 255 self-locking plate nuts, identified as NSN 5310015971830 and part number M45913/1-010CS3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Delivery is required within 249 days, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Identification marking must comply with MIL-STD-130N and MIL-STD-129, while packaging and palletization must follow MIL-STD-2073-1E and DLA requirement RP001. The contract specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details