Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Benchtop Environmental Temperature/Humidity Chamber

Active
1232SA26Q0868Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Agriculture, Agricultural Research Service, Aeronautical and Food Processing Division is soliciting quotations for a Benchtop Environmental Temperature/Humidity Chamber under solicitation number 1232SA26Q0868, issued as a combined synopsis and solicitation in accordance with FAR Part 12. This is a total small business set-aside under the North American Industry Classification System code 332510, with a small business size standard of 750 employees, and only responsible small business concerns are eligible to submit quotes. The requirement is for a single commercial item designed to provide precise environmental control for testing and research purposes, and no separate written solicitation will be issued. All responses must be submitted by the deadline of August 7, 2026, at 9:00 p.m. Eastern Time, following the format and requirements outlined in the RFQ. The contract is being managed by the USDA ARS AFM APD office located in Beltsville, Maryland, with Jessica Pacheco serving as the primary point of contact for inquiries, reachable via email at jessica.pacheco@usda.gov. The place of performance has not been specified beyond the agency’s location, and quotations will be evaluated based on commercial item pricing, technical acceptability, and small business compliance. Interested parties must submit their responses through the SAM.gov portal by the specified deadline, as this announcement serves as the sole solicitation document and no further procurement actions will be issued.

General Info

USDA seeks small business quote for benchtop environmental chamber by August 7, 2026, via SAM.gov.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

MD

Set-Aside

SBA

Documents

(3)

SF-1449_1232SA26Q0868.pdf

PDF

Attachment+1-+Technical+Specifications.pdf

PDF

Attachment+2-+Terms+and+Conditions.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Agriculture → USDA Ars Afm Apd
Contacts1 person available
OfficeBELTSVILLE, MD, 20705, USA
Organization / Agency
Department Of Agriculture → USDA Ars Afm Apd
View Agency Profile
Office AddressBELTSVILLE, MD, 20705, USA
Contacts
Jessica Pacheco

Full Description

Show more

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12.  This announcement constitutes the only solicitation.  Quotations are being requested and a separate written solicitation will not be issued. 



Solicitation number 1232SA26Q0868 is issued as a Request for Quotation (RFQ) for a Benchtop Environmental Temperature/Humidity Chamber.



This acquisition  is set-aside for small business concerns.  The applicable North American Industry Classification Standard Code is 332510.  The small business size standard is 750.  This acquisition is a Total Small Business Set-Aside.  All responsible sources may submit a quotation which will be considered by the agency. 

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
ROLLER RETAINER, GEA
Solicitation # SPE4A7-26-Q-0945
The contract pertains to the procurement of 23 units of a roller retainer identified by NSN 1615-01-090-5922, under solicitation SPE4A7-26-Q-0945, with a required delivery date 171 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. The item involves controlled technical data subject to export regulations under either ITAR or EAR, restricting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce. This includes U.S. companies and their foreign subsidiaries, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. Packaging must comply with DLA procurement standards, inspection and acceptance occur at origin, and non-accepted supplies must have all government identification removed. The solicitation was posted on July 31, 2026, with responses due by August 7, 2026, under the Department of Defense’s Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
PLUG ASSEMBLY, SEALING
Solicitation # SPE7L1-26-Q-1417
The contract is for the procurement of four plug assemblies for sealing, identified by NSN 5340-01-324-8500, under solicitation SPE7L1-26-Q-1417, with a response deadline of August 7, 2026, and a required delivery within 202 days after award. The item is governed by DLA packaging and technical requirements incorporated through the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Offerors must comply with MIL-STD-130N for identification marking of U.S. military property and source control drawing requirements; only approved sources may supply the item, and non-approved offerors must obtain OEM source approval and submit documentation with their proposal. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and be approved by DLA to access controlled data. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All submissions must adhere to strict data handling protocols, and proprietary information must be safeguarded against unauthorized use or dissemination.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-Q-0156
The contract pertains to the procurement of 43 units of a cargo tie-down device for vehicles, identified by NSN 3990-01-317-6965, under solicitation SPE8EF-26-Q-0156. Deliveries are required within 60 days after award, with firm fixed pricing and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the items must be packaged in compliance with ASTM D3951, though DLA’s Master List of Technical and Quality Requirements take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 guidelines. The unit of issue is each, and shipment is FOB origin. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Technical data is not currently available for competitive procurement due to proprietary or insufficient documentation, and casting or forging may be involved, requiring potential support through DLA’s Casting and Forging Assistance program. The contract specifies delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20. The item is sourced from authorized manufacturers including New England Manufacturing Group and Sikorsky Aircraft Corporation, both referencing part number 70217-01003-173. The contract includes provisions for Covered Defense Information and mandates full compliance with all DLA technical and quality requirements referenced by R or I numbers from the DLA Master List. Pricing, delivery, and packaging terms are strictly defined with no flexibility, and all government identification must be removed from non-accepted supplies. The point of contact for inquiries is Sharon Forde, and the solicitation’s response deadline is August 7, 2026, with an award anticipated shortly thereafter, leading to a required ship date of July 21, 2026. The Department of Defense is the contracting agency, and the procurement falls under federal acquisition protocols.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-854Y
This contract, issued under solicitation SPE7L1-26-T-854Y by the Department of Defense’s Land Supply Chain, seeks delivery of one unit of a CAP, FILLER OPENING (NSN 5340016312496) at a unit price of $1.00, with delivery required within 20 days after order to the Japan Air Self Defense Force at 2-3 Inariyama, Sayama Shi, Saitamaken 350-1394, Japan. The delivery term is FOB ORIGIN, meaning the contractor is responsible for proper packaging, preservation, and marking to meet MIL-STD-2073-1E and MIL-STD-129 standards prior to inspection and acceptance at the contractor’s facility. Packaging must follow DLA Packaging Requirements for Procurement (RP001), with palletization, preservation method 10 (cleaning and drying only), and no special marking required. All shipments must be labeled and barcoded in compliance with MIL-STD-129, and freight must be handled by K.LINE LOGISTICS LTD through TPS AVIATION INC in Hayward, CA. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements, including RA001, RC001, RQ011, and RD003 clauses governing source approval, documentation, and covered defense information. Mercury or mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have shockproof construction and a secondary containment per NAVSEA 5100-003D. The contractor must comply with FAR and DFARS clauses covering equal opportunity, anti-trafficking, employment verification, sustainable products, hazardous materials labeling, cybersecurity safeguards under NIST SP 800-171, and the prohibition of covered telecommunications equipment from designated foreign vendors. Invoicing must be submitted electronically via WAWF, and all payments are subject to the terms outlined in the resulting award. The contract is awarded on a fixed-price basis with zero variance permitted in quantity, and acceptance occurs at the origin. Representations regarding small business status, UEI, and CAGE codes are required but not completed in this solicitation document. The contracting officer’s representative is Kristina Derry, and the solicitation closed for response on August 5, 2026, with
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A7-26-T-592H
The contract specifies the procurement of five headless straight pins with NSN 5315-01-068-6447, to be delivered FOB destination to the Trident Refit Facility in Kings Bay, Georgia, within 20 calendar days after award. The item must conform to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements and is governed by military standards including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and current revision of part standard 709-4789050 TDP Rev A. Packaging must use clean/dry preservation methods without specified materials, and items require permanent physical marking per RQ017 to meet IUID standards. The solicitation applies strict export control under ITAR and EAR regulations, restricting technical data disclosure to entities approved by DLA under the US/Canada Joint Certification Program and trained in handling controlled data. Cybersecurity mandates include CMMC Level 2 certification and NIST SP 800-171 compliance for protecting Covered Defense Information. All shipments must comply with DLA packaging requirements and include appropriate hazard labeling under 29 CFR 1910.1200 and MIL-STD-129. Inspection at destination follows MIL-STD-1916 sampling criteria with AQL levels of 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Invoicing must be processed through WAWF, and contractors must provide UEI and CAGE codes, along with small business and socioeconomic certifications if applicable. The contract includes clauses on combating trafficking, employment eligibility verification, sustainable products, supplier payment acceleration, and unenforceable obligations, with a deviation 2026-00038 applied to multiple FAR clauses. The solicitation number is SPE4A7-26-T-592H, with responses due by August 5, 2026, via DIBBS, and the contract type remains unspecified pending completion by the contracting officer.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-582L
The contract is for the procurement of 68 units of SPACER, SLEEVE under solicitation SPE4A7-26-T-582L, with a delivery requirement of 270 days after delivery order issuance, targeting an original delivery date of April 25, 2027. The place of performance is DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL, 36201-4199, with FOB destination terms but acceptance occurring at origin. Packaging must adhere to MIL-STD-2073-1E with supplemental instructions to use Box EC and bag BS within unit containers, and palletization must comply with DLA Packaging Requirements RP001. Preservation specifications include Method 42 (CLNG/DRY:1), preservation material 09, wrap material GH, and cushion/dunnage material GT with thickness A. Marking and labeling must follow MIL-STD-129, with special attention to hazardous materials requiring compliance with 29 CFR 1910.1200 and radioactive materials needing specific labeling if activity exceeds 0.002 microcuries per gram or 0.01 microcuries per item. Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization from the Department of State or Commerce, and access is restricted to contractors with approved JCP certification, training completion, and DLA authorization. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with quality requirements referencing ISO 9001:2015, MIL-STD-1916, and MIL-STD-105/ASQ Z1.4, requiring zero non-conformances unless otherwise specified. The contractor must comply with cybersecurity mandates including 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, 252.240-7997 for NIST SP 800-171 assessments, and 52.240-93 for safeguarding contractor information systems. Invoicing must be submitted electronically through WAWF using invoice 2in1 or cost voucher formats. Contract clauses include mandatory provisions on combating human trafficking, employment eligibility verification, sustainable products, hazardous material
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, DOOR, VEHICUL
Solicitation # SPE7L4-26-T-5719
The contract solicitation SPE7L4-26-T-5719 is for the procurement of 68 units of a vehicular door handle (NSN 2540-01-564-0386) at a unit price of $68.00, for a total value of $4,624.00. Delivery is required within 331 days after award, with FOB origin terms and destination inspection and acceptance. The item must be packaged and labeled per MIL-STD-129, with palletization following DLA’s RP001 requirements; if hazardous under FED-STD-313, packaging adherence to TQ Requirement IP025 is mandatory, otherwise commercial packaging per ASTM D3951 applies with precedence given to the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval. All shipping must be addressed to DLA Distribution Red River in Texarkana, Texas, and invoicing must be conducted electronically through WAWF. The contract includes federal acquisition regulation clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, NIST SP 800-171 compliance, transportation by sea, and prohibitions on unauthorized obligations. Offerors must comply with representations regarding small business status, UEI and CAGE codes, and disclosure of covered defense telecommunications equipment if applicable. The solicitation imposes no variance in quantity (plus or minus 0%), requires full compliance with all referenced standards, and mandates electronic submission via DIBBS by the deadline of July 31, 2026. The contract type has not been finalized, and no options or extended performance periods are currently defined beyond the base delivery schedule.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-09LW
The contract is for the procurement of a quick-release pin, part number 5315012458877, under solicitation SPE4A6-26-T-09LW, issued by the Department of Defense’s ASC Commodities Division. The item is designated as a critical application item with a required quantity of 263 units, delivered FOB origin with a delivery timeline of 162 days after award, and a need ship date of January 10, 2027, though the original required delivery date is March 27, 2027. Inspection and acceptance occur at the destination facility, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951, but adherence to the DLA Master List of Technical and Quality Requirements takes precedence, including specific mandates under RP001 for palletization and RQ017 for bare item marking. All packaging and labeling must follow MIL-STD-129 with 2D Data Matrix barcodes, and hazardous material labeling must conform to OSHA’s Hazard Communication Standard. The unit of issue is each, with no quantity variance permitted. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses addressing labor equity, human trafficking prevention, employment eligibility, sustainable products, hazardous material identification, cybersecurity safeguards, export control, payment processing via WAWF, and prohibition of certain foreign equipment. Offerors must hold a Unique Entity Identifier and CAGE code, and if representing as a small business, must certify eligibility under applicable socioeconomic programs such as HUBZone, SDVOSB, or WOSB. Affirmative responses regarding provision of covered defense telecommunications equipment require detailed disclosures. All submissions must be completed electronically through the DLA Internet Bid Board System (DIBBS) by August 5, 2026, with technical and quality requirements identified by R or I numbers sourced from the DLA Master List. No formal evaluation factors or basis of award are disclosed, but compliance with technical, quality, packaging, and regulatory standards is strictly required, and pricing is structured as a fixed-price arrangement under the terms of FAR 52.216-1. Payment instructions mandate use of the Wide Area WorkFlow system with invoice 2in1 or combined receiving report formats.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

NAICS: 561720
New
Federal
Janitorial Services – Edinburg, TX
Solicitation # 1232SA26Q1088
The solicitation 1232SA26Q1088 is a Request for Quotation for janitorial services at 22675 N Morrefield Rd, Edinburg, TX, issued under FAR Part 12 as a combined synopsis and solicitation with no separate written document to follow. The contract spans a base year and four option years, each for one full year of janitorial services, with all pricing submitted per year. Despite the North American Industry Classification System code 561720 indicating cleaning services and a small business size standard of $22 million, the acquisition is designated as a Total Small Business Set-Aside, meaning only small businesses are eligible to respond. Although the title and requirement section incorrectly reference landscaping services, the actual scope of work, pricing structure, and attachments clearly pertain solely to janitorial services. All responsible small business concerns may submit quotations, which must be received by August 13, 2026, at 7:00 p.m. PST. A site visit is available upon request and must be scheduled before August 7, 2026, by contacting Brian Fien at Brian.Fien@usda.gov. The solicitation includes three required attachments: Terms and Conditions, Statement of Work, and Wage Determination, all accessible via the online posting. The contracting office is located in Beltsville, Maryland, under the U.S. Department of Agriculture, and all communications should be directed to the primary point of contact listed.
Janitorial Services

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333111
New
Federal
Mapping Guidance Yield Monitor System
Solicitation # 1232SA26Q01132
The U.S. Department of Agriculture’s Agricultural Research Service is soliciting quotations for a Mapping Guidance Yield Monitor System under solicitation number 1232SA26Q01132, issued as a combined synopsis and request for quotation in accordance with FAR Part 12. This acquisition is a total small business set-aside under NAICS code 333111 with a small business size standard of 1,250 employees, open to all responsible small business concerns. Quotations must include a firm fixed price offer on company letterhead, with the place of manufacture listed for every item, completed SF-1449 form with all contract line items fully priced, a valid Sam.gov Unique Entity ID, and a capability statement with technical documentation demonstrating full compliance with all performance requirements outlined in Attachment 2 – Specifications. All parts must be new, approved, and meet form, fit, and function requirements; alternate parts are permitted only if pre-approved and fully conforming. Quotes must be submitted via email to Elizabeth Calhoun at Elizabeth.Calhoun@usda.gov no later than 9:00 AM PT on August 14, 2026, with the solicitation title and number clearly stated in the email subject line. Questions must be submitted by 2:00 PM PT on August 7, 2026, using the same subject line requirement. The government reserves the right to award without discussions and will reject any quotation that fails to provide all required elements in full compliance with the solicitation. Performance is expected to occur in Akron, Colorado, with the contracting office located in Beltsville, Maryland. No separate written solicitation will be issued, and failure to adhere strictly to submission requirements will result in automatic rejection.
Farm Machinery and Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237130
New
Federal
Solar Construction on New Building
Solicitation # 1232SA26Q0880
This contract solicitation, identified as 1232SA26Q0880, is a combined synopsis and solicitation issued under FAR Part 12 for the installation of a new solar array on the rooftop of an existing building at the Southwest Watershed Research Center in Tucson, Arizona. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 237130, with a small business size standard of $45 million, and is open only to responsible small business concerns. The solicitation is an RFQ and no separate written solicitation will be issued; all quotations must be submitted by the deadline of August 7, 2026. The work includes electrical installations for a 12.47 kV primary and 208V/120V secondary system, final connections to the existing transformer, patching and repair of the roof membrane, and full project management. The performance period is set at 200 calendar days from the Notice to Proceed. All proposals must comply with numerous mandatory contract clauses, including labor standards under the Davis-Bacon Act, whistleblower protections, anti-trafficking requirements, and security protocols for information systems. Offerors must submit a fully completed SF 1442, a summary cover letter with SAM UEI and Tax ID, an acknowledgement of all amendments, and all specified attachments, including the Statement of Work, project specifications, PV drawings, pricing schedule, and wage determination. Failure to provide any required document renders the offer non-responsive. The award will be made using a Lowest Priced Technically Acceptable methodology, where technical acceptability and past performance serve as pass/fail gates. Acceptability depends on meeting all specifications, safety standards including EM 385-1-1, material handling and labeling requirements, and submission of a Site Specific Safety Plan approved by the Government. Contractors must provide an on-site superintendent with five years of relevant experience and a certified Site Safety and Health Officer, maintain workforce integrity, adhere to Buy American requirements, and comply with prevailing wage rates as specified. Performance and Payment Bonds are required, along with specific insurance coverage. Invoices must include detailed information including TIN, SAM UEI, contract number, and deliverables, and submission must follow a dual process: an original and copy to the Contracting Officer and COR, followed by electronic submission through the Treasury’s IPP portal. Inspection and acceptance follow a multi-stage process with formal notifications, required attendance by contractor representatives
Power and Communication Line and Related Structures Construction

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
Federal
Whole Genome Sequencing from Rainbow Trout blood samples
Solicitation # 1232SA26Q115
This solicitation, numbered 1232SA26Q1115, is a combined synopsis and request for quotation issued under FAR Part 12 for the whole genome sequencing of rainbow trout blood samples, set aside exclusively for small businesses with a size standard of $19 million under NAICS code 541380. All responsible small businesses may submit quotations, but compliance with all submission requirements is mandatory and strictly enforced. Offerors must provide a firm fixed price quote on company letterhead, including all costs such as shipping, the place of manufacture, and a validity period of at least 60 days after submission, along with a fully completed SF-1449 form with all contract line items priced, a current Sam.gov Unique Entity ID, and a capability statement or technical documentation proving the ability to meet or exceed all specified technical requirements. Failure to submit any of these elements by the deadline will result in automatic rejection without further interaction. Quotes must be emailed by 9:00 AM CST on August 14, 2026, to Katelyn Nelson at katelyn.nelson@usda.gov, with the exact solicitation title and number as the subject line. Questions must also be directed to the same point of contact, using the correct subject line format, and must be received no later than 9:00 AM CST on August 5, 2026. The government intends to award the contract without negotiations but reserves the right to hold discussions if necessary. Performance of the work will occur in Kearneysville, West Virginia, and the awarding agency is the USDA Agricultural Research Service located in Beltsville, Maryland.
Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
Federal
Chiller Contactors and Control Panel Supply Parts (Manhattan, KS)
Solicitation # 1232SA26Q1180
The U.S. Department of Agriculture, through its Agricultural Research Service office in Beltsville, Maryland, is soliciting quotations for Chiller Contactors and Control Panel Supply Parts under solicitation number 1232SA26Q1180, which is issued as a combined synopsis and solicitation in accordance with FAR Part 12. This is an unrestricted commercial item acquisition not set aside for small businesses, with the North American Industry Classification System code 335999, and the small business size standard is set at 600 employees. All responsible vendors may submit a quotation, and no separate written solicitation will be issued. The parts required are for use at a facility in Manhattan, Kansas, with a delivery address of 66502, and must meet the specified brand name or equal requirements. Quotations must be submitted by the deadline of August 6, 2026, at 4:00 p.m. Eastern Time, with the solicitation posted on July 31, 2026. Primary point of contact for inquiries is Spencer Hamilton, reachable at spencer.hamilton@usda.gov. The procurement is open to any qualified source capable of supplying the required components, and awards will be made based on responsiveness, responsibility, and compliance with the technical and commercial terms outlined in the RFQ. The full solicitation details and submission guidance are accessible via the provided SAM.gov workspace link.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
Federal
S-300 Mini Spray Dryer
Solicitation # 1232SA26Q0929
The U.S. Department of Agriculture, Agricultural Research Service, is seeking quotes for an S-300 Mini Spray Dryer under solicitation number 1232SA26Q0929, which is issued as a combined synopsis and solicitation in accordance with FAR Part 12. This acquisition is entirely set aside for small businesses, with a North American Industry Classification System code of 334516 and a small business size standard of 1,000 employees. All responsible small business concerns are invited to submit quotations, provided they are actively registered in the System for Award Management (SAM.gov) at the time of submission and award. The requirement mandates detailed technical specifications demonstrating the vendor’s ability to supply the exact equipment as specified; generic responses that merely confirm availability without comparative detail will be disqualified. Quotes must be submitted electronically by 4:00 p.m. Central Standard Time on Friday, August 14, 2026, to lynn.hults@usda.gov, with no faxed or hard-copy submissions accepted. Questions must be submitted no later than 3:00 p.m. Central Standard Time on Tuesday, August 11, 2026. Payment will be processed through the Department of the Treasury’s Invoice Processing Platform. The place of performance is Beltsville, Maryland, and the sole point of contact for the solicitation is Lynn Hults.
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333111
New
Federal
1232SA26Q1190 – Combination Synopsis/Solicitation for a Seed Counting Carousel USDA-ARS-MWD Ames IA
Solicitation # 1232SA26Q1190
The U.S. Department of Agriculture’s Agricultural Research Service is soliciting quotations for a seed counting carousel to support maize breeding research conducted across Iowa under the Germplasm Enhancement of Maize Project. The equipment must be compatible with existing planting equipment and is intended for counting yield trial entries during field operations. This solicitation, identified as 1232SA26Q1190, is issued as a combined synopsis and solicitation under FAR Part 12, meaning no separate written solicitation will be issued and responses must be submitted by the deadline of August 17, 2026. The acquisition is exclusively set aside for small businesses, with the NAICS code 333111 and a size standard of 1,250 employees, and all responsible small business concerns are eligible to respond. The requirement is subject to the Buy American Act, and compliance with FAR clauses 52.225-1 and 52.225-2 is mandatory. Failure to submit a completed Buy American Certificate will disqualify a quotation from consideration. The contract's place of performance is in Ames, Iowa, while the issuing office is located in Beltsville, Maryland. All inquiries should be directed to Theodore Blume at the provided email address. Responses must be received by the specified deadline to be considered for award.
Farm Machinery and Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 16 days
View Details