BEQ BB200-BB300 Area Paint & Flooring Repairs

This contract, titled BEQ BB200-BB300 Area Paint & Flooring Repairs and identified by solicitation number N4008526R9064, is a combined fixed-price construction solicitation issued by NAVFACSYSCOM Mid-Atlantic under the Department of Defense, with a total small business set-aside under NAICS code 236220, limiting eligible bidders to only general MACC contractors listed on the General Requirements cover page. Work is to be performed exclusively at Marine Corps Base Camp Lejeune, North Carolina, focusing on paint and resilient flooring repairs in designated buildings, with all activities required to be carried out in phases according to an approved construction schedule. Proposals must be submitted by August 17, 2026, and the contractor is obligated to adhere to strict specifications for materials, including painting and flooring products delivered in original sealed containers with specific labeling requirements for manufacturer details, batch numbers, project identification, and handling instructions. Paints must be in containers no larger than five gallons, and all hazardous materials must be stored between 40 and 95 degrees Fahrenheit, off the ground, under cover, with adequate ventilation and segregated from VOC-absorbing materials. The contract mandates rigorous compliance with federal and military health, safety, and environmental standards, requiring an Emergency Response Plan meeting EM 385-1-1 and OSHA 29 CFR 1910.120 and 1926.65, a Site Safety and Health Officer with at least one year of experience, and personnel certified through 40-hour initial and 8-hour supervisor training. All hazardous waste must be properly labeled with the words “HAZARDOUS WASTE,” the appropriate hazard indicator, accumulation start date, and container count as required by EPA and NCDEQ, and must comply with DOT storage standards. Quality control is governed by a submitted plan due within 15 days of award, including a personnel matrix identifying responsibility for the three phases of control and testing, with all laboratory test results stamped clearly as “CONFORMS” or “DOES NOT CONFORM.” Daily production and quality control reports must be submitted by 10:00 AM the next working day, accompanied by monthly submittals including certified payrolls, safety self-evaluations, solid waste disposal reports, and a monthly exposure report, failure of which may result in a 10% voucher retention. The contractor must