Modify Transfer Facility NBK Bangor

PROJECT DESCRIPTION This Design-Build Statement of Work (SOW) outlines a critical two-phase renovation and modernization of Facility #6594 (Transfer Facility, Bangor). A critical constraint is that the facility must remain operational and mission-capable between Phase 1 and Phase 2, necessitating strict scheduling, specialized security protocols, and multiple mobilization/demobilization cycles. CONSTRUCTION PHASING REQUIREMENTS Construction phasing requirements include mobilization and demobilization. Mobilization and demobilization require special planning due to the two phases of the project which will require the construction contractor to mobilize and demobilize. Contractor must stop working for extended periods of time for operational reasons requiring mobilizing and demobilizing more than once. The design for Phase 1 and Phase 2 must be completed and approved during Phase 1. A/E must provide all-construction documents for both phases during Phase 1 that clearly identifies the work that must be accomplished during each phase for acceptance by Naval Facilities Engineering Command (NAVFAC) and Strategic Weapons Facility Pacific (SWFPAC). Where appropriate infrastructure such as transformers, switch gear, floor loading, Heating, Ventilation, and Air Conditioning (HVAC) sizing that will be provided in the first phase must be sized and provided to support the operations of Phase 1 and Phase 2. Phase 1 includes everything not in Phase 2. General Description Phase 2: Phase 2 expands upon the efforts from Phase 1 by providing installation of new building equipment. Phase 2 also must include special costs for those items that are inherent in executing the construction project but do not result in physical features for the end-product (e.g., temporary lay-down area for staging construction material). All efforts listed below as part of Phase 2 are planned as stand-alone and will result in a complete and usable facility at the completion of the individual phase. • Disassemble and removal one existing 40-ton bridge crane.(BY Navy Crane Center) • Replace the existing crane and connect to local power supply.(BY Navy Crane Center) • Provide a prefabricated paint booth will be installed in the High Bay area. Connect the paint booth to power, the air dryers and filters at point of use to support life safety and ventilation requirements. All efforts listed above as part of Phase 2 must be planned during Phase 1 as stand-alone and will result in a complete and usable facility at the completion of the individual phase.
Pre-bid meeting (optional): 11-12-2026 12:00 PM (PT)