72--BLANKET,SURVIVAL

BLANKET,SURVIVAL
BLANKET, SURVIVAL
..
CASUALTY BLANKET; LIGHTWEIGHT; WATERPROOF;
ALUMNIZED PLASTIC; WITH METAL EYELET LOCATED
AT EACH CORNER; UNFOLED WIDTH 56.000 IN NOMINAL;
UNFOLDED LENGTH 84.000 IN NOMINAL, BINDING
METHOD TAPED, FINISHED WEIGHT 0.750 POUNDS;
ONE SIDE OLIVE DRAB: SHADE SOURCE FEDERAL
STANDARD 595, SHADE IDENTIFICATION 34087
AND OTHER SIDE SILVER; COLOR PATTERN SOLID<(>,<)>
FOLDED 6 IN WIDE BY 7-3/4 IN LONG BY 2-1/2 IN
THICK AND IN A VACUUM SEALED FINISHED
ITEM BAG.
..
UNIT OF ISSUE: EACH (EA)
..
TWO PRE-AWARD SAMPLES WILL BE REQUIRED
FROM VENDORS WHO HAVE NOT PREVIOUSLY
SUPPLIED THIS ITEM TO THE GOVERNMENT.
IF A VENDOR HAS SUCCESSFULLY SUPPLIED
THIS ITEM TO THE GOVERNMENT THE PRE-AWARD
SAMPLE REQUIREMENT WILL BE WAIVED AND
ONLY A CERTIFICATE OF CONFORMANCE WILL
BE REQUIRED.
.
52.246-15 CERTIFICATE OF CONFORMANCE
.
PRE-AWARD SAMPLES WILL BE EVALUATED
IN ACCORDANCE WITH MIL-B-36964B DATED
27 AUGUST 1973.
..
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPECIFICATION REQUIREMENTS: . SHALL BE IN ACCORDANCE WITH MIL-B-36964B DATED 27 AUGUST 1973, EXCEPT AS FOLLOWS: . PAGES 1 AND 2, PARA. 2.1, UNDER "SPECIFICATIONS FEDERAL" DELETE ALL REFERENCE TO "PPP-B-636"; UNDER "STANDARDS MILITARY" DELETE ALL REFERENCE TO "MIL-STD-129. ADD THE FOLLOWING:
. "OTHER GOVERNMENT
. "MEDICAL MARKING STANDARD NO. 1" . PAGE 2, 2.2, ADD THE FOLLOWING UNDER "ASTM" "D 1974 - STANDARD PRACTICE FOR METHODS OF
. CLOSING, SEALING, AND REINFORCING
. FIBERBOARD SHIPPING CONTAINERS. "D 5118 - STANDARD PRACTICE FOR FABRICATION OF
. FIBERBOARD SHIPPING BOXES." IN PARENTHETICAL NOTE, DELETE ASTM'S ADDRESS AND SUBSTITUTE "ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959".
SPE2DS-27-T-1588
SECTION B
.
PAGE 3:
.
3.1.2 TYPE II, LINE 5, BEFORE "SHADE #34087"
ADD "SHALL APPROXIMATE".
.
ADD NEW PARAGRAPH AS FOLLOWS:
"3.1.3.1 COLOR. THE COLOR OF THE TYPE III
BLANKET SHALL BE SILVER ON ONE SIDE AND FLUOR
ESCENT ORANGE (US ARMY #238 OR #38903 FED-STD
595B) ON ALUMINIZED SIDE. THE
FLUORESCENT ORANGE SIDE SHALL MATCH THE STAND
ARD SAMPLE FOR SHADE AND FLUORESCENCE UNDER
ULTRA-VIOLET LIGHT, WHEN INSPECTED PER 4.3.2.
.
TABLE II-REQUIREMENTS:
A. LINE 3 IN THE "CHARACTERISTICS" COLUMN AFTER
"STRENGTH" ADD "EACH DIRECTIONS".
B. IN THE "REQUIREMENTS" COLUMN LINE 3, CHANGE
"25,000" TO "20,000", AND ADD "1/".
C. ADD NEW FOOTNOTE AS FOLLOWS:
"1/ TENSILE STRENGTH SHALL BE CALCULATED BASED
ON THE THICKNESS OF THE MYLAR FILM."
.
PAGE 4:
TABLE III REQUIREMENTS:
A. LINE 3 IN THE "CHARACTERISTICS" COLUMN AFTER
"STRENGTH" ADD "EACH DIRECTION".
B. IN THE "REQUIREMENTS" COLUMN:
(1) LINE 2: CHANGE "4" TO "3.3".
(2) LINE 3: CHANGE "25,000" TO "20,000".
(3) LINE 7: CHANGE "1300" TO "300".
(4) LINE 8: CHANGE "30" TO "20".
(5) LINE 9: CHANGE "2.0" TO "5.0"
.
PAGE 6:
ADD NEW PARAGRAPH AS FOLLOWS:
"4.3.2 COLOR MATCHING. THE FLUORESCENT ORANGE
SIDE OF THE TYPE III SHALL BE COMPARED TO THE
APPROVED SHADE UNDER ARTIFICIAL DAYLIGHT HAVING
A COLOR TEMPERATURE OF 7500 DEGREES KELVIN. THE
SAME SIDE SHALL BE COMPARED TO THE STANDARD FOR
FLUORESCENCE UNDER ULTRA-VIOLET LIGHT".
.
.
PAGE 9:
6.3 SAMPLE. DELETE ENTIRELY AND SUBSTITUTE:
"FOR ACCESS TO SAMPLE FLUORESCENT ORANGE U.S.
ARMY 238, PIECE NO. 6667, ADDRESS THE PROCURING
ACTIVITY ISSUING THE INVITATION FOR BID".
.
.
PAGES 7 AND 8, DELETE "SECTION 5. PREPARATION
FOR DELIVERY" ENTIRELY AND SBUSTITUTE THE
FOLLOWING:
.
"5. PACKAGING
.
"5.1 PRESERVATION. PRESERVATION SHALL BE
MILITARY, AS SPECIFIED (SEE 6.2).
.
"5.1.1 UNIT. EACH (EA). ONE BLANKET, AS
SPECIFIED, CONSTITUTES ONE UNIT.
.
"5.1.1.1 TYPE I. EACH TYPE I BLANKET SHALL BE
NEATLY FOLDED TO 6" X 7-3/4" X 2-1/2" AND SHALL
BE SUPPLIED IN A SUITABLE SEALED CLEAR
POLYEHTYLENE BAG. EACH PACKAGED BLANKET SHALL
BE SUPPLIED IN A BOX OF APPROPRIATE SIZE
CONFORMING TO PPP-B-566. CLOSURE SHALL BE AS
SPE2DS-27-T-1588
SECTION B
SPECIFIED IN THE BOX SPECIFICATION.
.
"5.1.1.2 TYPE II AND TYPE III. EACH TYPE II
AND TYPE III BLANKET SHALL BE PLEAT-FOLDED AND
ROLLED TO 2-3/4" X 4-1/2" X 1-3/4" AND SHALL BE
SUPPLIED IN A SUITABLE SEALED CLEAR POLYETHYLENE
BAG. EACH PACKAGED BLANKET SHALL BE SUPPLIED IN
A BOX OF APPROPRIATE SIZE CONFORMING TO
PPP-B-566. CLOSURE SHALL BE AS SPECIFIED IN THE
BOX SPECIFICATION.
.
"5.1.2 INTERMEDIATE PACKAGE. TWELVE UNITS OF
ONE TYPE ONLY SHALL BE PACKAGED IN A BOX
CONFORMING TO ASTM D 5118, TYPE CF, CLASS
WEATHER-RESISTANT. CLOSURE SHALL BE AS
SPECIFIED IN ASTM D 1974, CLOSURE METHOD 1D.
INTERMEDIATE PACKAGE SHALL BE WEATHER-RESISTANT
AS SPECIFIED IN ASTM D 1974.
.
"5.2 PACKING. PACKING SHALL BE LEVEL B, AS
SPECIFIED (SEE 6.2).
.
"5.2.1 LEVEL B.
.
"5.2.1.1 TYPE I. FOUR INTERMEDIATE PACKAGES
(48 UNITS) SHALL BE PACKED IN AN EXTERIOR
CONTAINER DESIGNED FOR A TYPE 2 LOAD AND
CONFORMING TO ASTM D 5118, CLASS DOMESTIC.
CLOSURE SHALL BE AS SPECIFIED IN ASTM D 1974,
CLOSURE METHOD 1E.
.
"5.2.1.2 TYPE II AND TYPE III. TWELVE
INTERMEDIATE PACKAGES (144 UNITS) SHALL BE
PACKED IN AN EXTERIOR CONTAINER DESIGNED FOR A
TYPE 2 LOAD AND CONFORMING TO ASTM D 5118,
CLASS DOMESTIC. CLOSURE SHALL BE AS SPECIFIED
IN ASTM D 1974, CLOSURE METHOD 1E.
.
"5.2.2 PACKING VARIATION PERMITTED. IF THE
REQUIRED NUMBER OF UNITS TO BE SHIPPED IS LESS
THAN THE NUMBER OF UNITS SPECIIFED TO BE OVER
PACKED IN AN EXTERIOR CONTAINER, SUCH UNITS
SHALL BE PACKED IN AN EXTERIOR CONTAINER OF
SUITABLE SIZE AND DESIGN, ACCEPTABLE TO A COMMON
CARRIER, WHICH WILL INSURE SAFE DELIVERY TO
DESTINATION.
.
"5.2.3 UNITIZED LOADS. MATERIAL SHALL BE
UNITIZED AS SPECIFIED IN THE CONTRACT OR ORDER.
.
"5.3 MARKING. EACH UNIT CONTAINER, INTERMEDIATE
PACKAGE, EXTERIOR CONTAINER AND UNITIZED LOAD
SHALL BE MARKED AS SPECIFIED IN MEDICAL MARKING
STANDARD NO. 1."
.
7210-00-935-6666/6667 31 DECEMBER 2001
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
SPE2DS-27-T-1588
SECTION B
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 7210-00-935-6665 Quantity: 4,000 EA Purchase Request: 7018912073QTY: 4000 Delivery: 141 days ADO