Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Blind Rivet Nut Manufacturing and Supply

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and delivery of 10,000 plain blind rivet nuts designated by NSN 5310-00-934-0222, constructed from cadmium-plated steel and fully compliant with applicable military specifications. These components are critical for aerospace and defense applications where structural integrity and corrosion resistance are essential, and the requirement is issued under a subcontract arrangement by the Department of Defense through the Aviation Supply Chain ESOC Buys office. All delivered items must meet stringent quality and performance standards established for military-grade fasteners, with no deviations permitted in material, finish, or dimensional tolerances. The solicitation was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and is managed through the DIBBS system under the NAICS code 332722, which governs screw, nut, and bolt manufacturing. The place of performance is not specified, indicating flexibility in production location provided all contractual and regulatory requirements are met. While no set-aside designation is provided, the procurement is exclusively for subcontractors capable of fulfilling the technical and volume demands of this defense-related supply requirement. All bids must align with the defined specification and be submitted via the official DIBBS portal before the deadline to be considered.

General Info

Manufacture and deliver 10,000 cadmium-plated steel rivet nuts to military specs by August 10, 2026, via DIBBS for defense use.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 10,000 plain blind rivet nuts (NSN: 5310-00-934-0222) in cadmium-plated steel, compliant with military specifications.

Similar Contracts

Same NAICS industry code

First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305000667327)The contract pertains to the supply of 977 standardized machine screws identified by NSN 5305000667327, with all items required to meet military-specific packaging, marking, and inspection standards to ensure compatibility and reliability in defense applications. The order is issued under a subcontract arrangement by the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 332722, which classifies the manufacturing of screws, nuts, and bolts. Although the solicitation number and point of contact are not provided, the contract was posted on August 3, 2026, and the place of performance and office address details remain unspecified. The goods must adhere strictly to military specifications for quality assurance and logistical integration, and the procurement is managed through the DIBBS platform under contract number SPE7M226V4554. The requirement reflects a targeted, low-volume acquisition critical to sustaining military equipment readiness.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-11KT

The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-607H

This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-X800

The contract solicitation SPE4A6-26-R-X800 outlines the procurement of 271 machine bolts, NSN 5306-01-564-3371, designated as a Critical Safety Item under Navy identification, requiring stringent quality and traceability controls. The items must be manufactured in compliance with SAE AS9100 quality standards and referenced engineering drawings, with mandatory correction of a weight discrepancy on part number 70400-38159 for MP-35N material. Inspection and acceptance occur at origin, with sampling protocols governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified. Critical attributes are assigned verification levels VII, IV, and II (AQLs 0.1, 1.0, 4.0), while unspecified attributes are treated as major. First Article Testing is required, with government inspection and testing responsibilities clearly defined. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with each unit packed to include lot and serial numbers, contractor and manufacturer CAGE codes, and part number; special marking is not required. Palletization follows DLA Packaging Requirements RP001. The contract includes cybersecurity compliance under CMMC Level 2 self-assessment and mandates defense information handling under RD002. The delivery schedule requires full delivery in 476 days ADO, with separate line items for government test units requiring delivery in 210 and 296 days. All pricing is firm fixed price with zero variance allowed. The contract incorporates FAR clauses for changes, subcontracting, ethics, whistleblower protections, quality assurance, and first article testing, while DFARS clauses address counterfeit part avoidance, electronic sourcing, and safeguarding of controlled unclassified information. Invoicing must be submitted electronically via WAWF, and the estimated contract value ceiling is $350,000, though specific unit prices remain unspecified. The item is destined for Fleet Readiness Center East in Cherry Point, NC, and the contract is subject to DPAS priority rating. Waivers and deviations require formal approval from the DSC Contracting Officer, and all supplies must be traceable through DART for airworthiness parts.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE7L1-26-T-906Y

The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-T-11KG

The contract is for a single plain hexagonal nut with NSN 5310-01-719-0720, to be delivered within 20 days of award under solicitation SPE4A6-26-T-11KG, with a response deadline of August 11, 2026. The item is subject to multiple technical and compliance requirements including CMMC Level 2 certification for the supplier, adherence to DLA packaging standards, and mandatory removal of government identification from non-accepted supplies. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting its disclosure or transfer to foreign persons anywhere in the world, including foreign nationals employed by U.S. firms; DFARS 252.225-7048 governs this restriction. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The procurement falls under NAICS code 332722 and is managed by the Department of Defense’s ASC Commodities Division, with performance to occur in Mechanicsburg, Pennsylvania. All requirements referenced by R or I numbers are derived from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

NUT, SELF-LOCKING, SL

Solicitation # SPE4A0-26-T-4149

The contract is for the procurement of two self-locking, slotted hexagon nuts designated by NSN 5310-00-047-2394 and part number MS21225-6, supplied in accordance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The nuts are classified as a critical application item and must conform to the non-government standards NASM21225 Rev 3, NASM25027 Rev 1, and MIL-DTL-32258. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with strict acceptance criteria—zero non-conformances required unless otherwise specified—where critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adheres to DLA packaging guidelines. The items must be delivered within five days FOB origin to the Naval Air Station North Island in San Diego, California, with no variance allowed in quantity. Shipping must be conducted via traceable freight, not parcel post, using the provided freight address and contact information. The contract number is SPE4A0-26-T-4149, the required delivery date is December 8, 2025, and the supplier is obligated to meet all government quality and identification requirements, including removal of government identifiers from non-accepted supplies and physical marking of the bare item.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-T-11JY

The contract pertains to the procurement of a single plain hexagon nut with NSN 5310-01-675-4516 under solicitation SPE4A6-26-T-11JY, with a delivery requirement of 20 days after delivery order. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, which must be accessed online and applied per the revision in effect on the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in the sample unless otherwise stated. The item is subject to cybersecurity maturity model certification level 2 requirements, and the contractor must be a certified C3PAO. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export control training, and approved DLA questionnaire responses. The place of performance is Mechanicburg, PA, and primary point of contact is Myonka Boyd of the ASC Commodities Division, Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

NUT, SELF-LOCKING, HE

Solicitation # SPE7LX-26-U-9152

The contract is for 5,827 self-locking hexagonal nuts with NSN 5310-01-657-3289, sourced under solicitation SPE7LX-26-U-9152, which is a Total Small Business Set-Aside for NAICS code 332722. Delivery is required within 57 days on a FOB origin basis with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. Packaging must adhere to RP001 DLA Packaging Requirements, with palletization specifically controlled under those guidelines. The unit of issue is each, and the contract specifies a total price based on a unit price with the quantity provided. Documentation for source approval, configuration changes, and variance requests must follow the referenced DLA processes including RC001, RQ002, and the requirement for a Request for Variance when deviations are proposed. The item is flagged as a Critical Application Item, and DLA direct delivery within the Continental U.S. is confirmed. The point of contact for inquiries is Theodore Misiolek at the Department of Defense’s Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-11JV

The contract pertains to the procurement of two flat washers with NSN 5310-01-669-1413, issued under solicitation SPE4A6-26-T-11JV by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days to the Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including MIL-STD-129 marking standards without special markings. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Attributes are to be classified with verification levels or AQLs as defined, and the manufacturer may choose attribute or variable inspection methods. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all items must be marked per MIL-STD-130N in addition to manufacturer details. The unit of issue is each, and shipment must be sent by the fastest traceable means, excluding parcel post. The supplier, Fastenal Company, is identified by part number 1133207, and the delivery must be completed no later than July 28, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

SUPPORT ASSEMBLY, BE

Solicitation # SPE4A0-26-T-4148

This contract is for the procurement of four units of the SUPPORT ASSEMBLY BEARING, identified by NSN 4310-01-253-5997 and part number 0-109-010-07, supplied by Honeywell International Inc. and Vericor Power Systems LLC. Delivery is required within five days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods defined, including preservative treatment, wrapping, cushioning, and palletization per DLA requirements. The item is classified as a critical application and requires physical identification marking. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise stated, and unspecified attributes are treated as major. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date. The contractor must comply with CMMC Level 2 self-assessment and adhere to DLA’s cybersecurity and documentation protocols. The item is destined for the Japanese Maritime Self-Defense Force Supply Depot in Yokosuka, Japan, shipped via Seamodal Transport Corporation, and the contract is issued under solicitation SPE4A0-26-T-4148 with a required delivery date of March 21, 2023.

Air and Gas Compressor Manufacturing

POSTED

about 11 hours ago

DEADLINE

JACK ASSY, AIRCRAFT,

Solicitation # SPE4A0-26-T-4147

This contract is for the procurement of one aircraft jack assembly identified by NSN 4920-01-585-6731, with a required delivery within five days of award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless an amendment supersedes it. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. Physical identification of the bare item is mandatory, and sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with specified attributes assigned verification levels or AQLs accordingly. Cybersecurity requirements are limited to DFARS 252.211-7003(c)(1)(i) as item unique identification is waived by the service customer, though covered defense information and cybersecurity standards remain in effect. Technical data associated with the item is subject to export controls under ITAR or EAR, and access is restricted to contractors approved under the US/Canada Joint Certification Program who have completed required DLA training and documentation. Distribution is tightly controlled to ensure compliance with DFARS 252.225-7048, including restrictions on disclosure to foreign nationals regardless of location. The solicitation, issued under SPE4A0-26-T-4147, has a response deadline of August 11, 2026, and performance is to be delivered to Norfolk, Virginia, with primary point of contact for inquiries being Danita Davis of the Department of Defense’s Aviation Supply Chain ESO Buy unit.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A0-26-T-4146

This contract specifies the supply of a single cable assembly with NSN 6150-01-657-8373 and part number CB 26D/125-00, under solicitation SPE4A0-26-T-4146, for delivery to the USS CARL M. LEVIN (DDG 120) at FPO AP 96692-1100. The item must be delivered within five days, FOB destination, with no quantity variance allowed, and is subject to inspection and acceptance at the delivery point. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking unless explicitly exempted for specific functional components like batteries or instruments, which must meet additional containment and shock-proof criteria per NAVSEA 5100-003D. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. The contract mandates adherence to DLA packaging and palletization guidelines, with special marking code 00 indicating no additional requirements. The delivery is part of a vessel shipment coordinated through DLA procedures, with the original required delivery date set for July 30, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Packaging, Marking, and Logistics Support (Optional Subcontract)The contract requires full compliance with MIL-STD-2073-1E standards for the packaging, preservation, and labeling of a bus conductor, ensuring all materials are properly protected, documented, and traceable throughout shipment. This includes the application of barcoding for inventory control, accurate hazard labeling in accordance with federal regulations, and strict adherence to DLA RP001 requirements for logistics and documentation integrity. All processes must support end-to-end traceability from packing through delivery, with attention to environmental conditions, material compatibility, and security protocols during handling and transport. Performance is required at Fort Campbell, Kentucky, with a response deadline of August 10, 2026, and the solicitation is categorized under NAICS code 493190 for other transportation support activities. The contracting entity is the Aviation Supply Chain ESOC Buys unit within the Department of Defense, indicating the work supports critical military logistics operations. This is an optional subcontract opportunity, meaning the selection of vendors will be at the discretion of the prime contractor, and submissions must meet all technical, regulatory, and procedural specifications outlined in the standards referenced.

Other Warehousing and Storage

POSTED

DEADLINE

Supply of Military Bus Conductor (Electrical Power Distribution Component)The contract requires the procurement and delivery of a single Bus Conductor identified by NSN 6150-01-534-9207 and part number 70550-01401-106, specifically engineered to meet military specifications for electrical power distribution systems. Full compliance with all technical standards, including performance, materials, and manufacturing tolerances, is mandatory, along with strict adherence to packaging, labeling, and marking requirements dictated by defense protocols. The item must be delivered to Fort Campbell, Tennessee, with the ZIP code 42223-0000 serving as the official place of performance. This is a subcontract under the NAICS code 335313, issued by the Department of Defense’s Aviation Supply Chain ESOC Buys division, and is not subject to any set-aside classification. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, providing suppliers a limited window to submit proposals. All deliveries must be completed in full compliance with the specified technical and logistical criteria to ensure integration into military power distribution networks.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation and assessment of NIST SP 800-171 security controls to safeguard Covered Defense Information and ensure compliance with DFARS cyber incident reporting obligations. All submitted solutions must align with the specified cybersecurity framework to protect sensitive data handled under Department of Defense contracts, with a focus on meeting rigorous technical and procedural standards. The work is scoped as a subcontract and must be fully executed by the stated deadline, with performance taking place at Fort Drum, New York, at the ZIP code 13602-5000. This solicitation is categorized under NAICS code 541512, indicating a focus on computer systems design and related services, and is issued under the Aviation Supply Chain ESOC Buys organization within the Department of Defense. The contract posting date is August 2, 2026, with responses due by August 10, 2026. All proposers must demonstrate proven capability in deploying and validating NIST 800-171 controls, maintaining audit readiness, and responding to cyber incidents in accordance with federal defense regulations. Compliance is mandatory and will be rigorously assessed as part of contract award and performance evaluation.

Computer Systems Design Services

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires comprehensive in-process and final inspection of terminal lugs in accordance with AQL sampling standards, specifying stringent acceptance criteria: critical defects at 0.1, major defects at 1.0, and minor defects at 4.0. All inspections must be conducted with full documentation and reporting to ensure compliance with Defense Logistics Agency requirements, emphasizing traceability and adherence to military-quality specifications. The work is to be performed at Fort Drum, New York, with a response deadline of August 10, 2026, and is solicited as a subcontract under NAICS code 541380, aligning with specialized engineering and technical services. The oversight authority is the Aviation Supply Chain ESOC Buys under the Department of Defense, ensuring all deliverables meet federal defense quality and procurement standards.

Testing Laboratories and Services

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires full compliance with military standards for the packaging, labeling, palletization, and documentation of terminal lugs, adhering strictly to DLA and MIL-STD specifications. All deliverables must meet rigorous defense logistics requirements to ensure readiness, traceability, and compatibility within military supply chains. The work is designated as a subcontract under NAICS code 493190 and is specifically tied to performance at Fort Drum, New York, with a zip code of 13602-5000. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with no set-aside type specified. The contracting activity falls under the Department of Defense, specifically the Aviation Supply Chain ESOC Buys organization, indicating this is part of a larger defense logistics initiative supporting aviation component readiness. All documentation and physical handling must align with federal military protocols to facilitate seamless integration into defense distribution networks.

Other Warehousing and Storage

POSTED

DEADLINE

Terminal Lug Manufacturing and SupplyThe contract requires the manufacture and supply of 49 military-spec terminal lugs designated by NSN 5940-01-432-7765, with full adherence to Defense Logistics Agency technical specifications, packaging protocols, labeling requirements, and quality assurance standards. All units must meet exacting defense-grade performance and durability criteria to ensure operational reliability in military environments. The work is to be performed under a subcontract arrangement, with the place of performance designated as Fort Drum, New York, at ZIP code 13602-5000. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with the NAICS code 335931 indicating the industry classification for other electrical equipment and component manufacturing. The contracting activity falls under the Department of Defense through the Aviation Supply Chain ESOC Buys office, and all deliverables must align with DLA’s rigorous compliance frameworks to qualify for acceptance and payment.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Transportation and Logistics for Military ShipmentsThe contract requires the arrangement and management of transportation for military supplies via sea or land, strictly adhering to Department of Defense and Defense Logistics Agency shipping standards. All logistics operations must comply with established military protocols to ensure secure, timely, and accurate delivery of essential materials across global operational theaters. The work is classified as a subcontract under NAICS code 488510, indicating specialized freight transportation support services, and is managed by the Aviation Supply Chain ESOC Buys division within the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, creating a tight eight-day window for interested parties to submit proposals. The contract does not specify a set-aside designation or target small business categories, and no particular place of performance or point of contact is identified in the provided data. Potential bidders must reference the official DIBBS portal link to access full requirements and submission guidelines, ensuring alignment with all procedural and compliance expectations outlined by the contracting office.

Freight Transportation Arrangement

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract requires the performance of quality conformance inspections in strict accordance with MIL-STD-1916 or ASQ H1331 standards, with an absolute mandate for zero non-conformances across all inspected items. The scope includes systematic sampling procedures and comprehensive documentation to ensure full traceability and compliance. All work must be executed to the highest standards of precision, as any deviation will be considered a failure. The opportunity is structured as a subcontract under NAICS code 541330, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys division. Proposals must be submitted by the deadline of August 10, 2026, with the solicitation posted on August 2, 2026. The place of performance and point of contact details are not specified, and no set-aside provisions apply. Interested parties must respond through the official DIBBS portal using the provided solicitation number.

Engineering Services

POSTED

DEADLINE