Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BLOCK, CABLE INSERT

Active
SPE4A7-26-T-605XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a BLOCK, CABLE INSERT with NSN 5975-01-386-6568 and part number RM120 from ROXTEC INC, with a quantity of 7 units priced at $7.00 each, totaling $49.00. Delivery is required within 229 days of contract award, with FOB origin terms, and inspection and acceptance to occur at the destination. The items must be packaged and labeled in strict accordance with MIL-STD-129, and packaging must comply with either ASTM D3951 for non-hazardous materials or FED-STD-313 and TQ requirement IP025 if hazardous, with all DLA Master List technical and quality requirements taking precedence. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Palletization must meet RP001 packaging standards, and the unit of issue is PR. All markings and identification must adhere to government specifications including physical identification of bare items and removal of government identifiers from non-accepted supplies. The delivery must be shipped to the designated receiving warehouse in Tracy, California, with a required ship date of March 28, 2027, matching the original delivery date. Transportation guidance is governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-605X, issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 10, 2026. The NAICS code is 335999, indicating other electrical equipment and component manufacturing. The point of contact is Renee Bynum, and all contractual obligations, including packaging, labeling, inspection, and delivery, are binding and must conform to DLA mandates without deviation unless explicitly permitted in writing. Quantity variance is strictly zero percent, and no substitutions or deviations are allowed without approval.

General Info

7 RM120 cable inserts at $7 each, delivered to Tracy, CA by March 28, 2027, per MIL-STD-129 and DLA requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-605X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Renee Bynum
contact@example.gov

Full Description

Show more
BLOCK,CABLE INSERT
BLOCK,CABLE INSERT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ROXTEC INC 1B3L6 P/N RM120
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697438 0001 PR 7.000
NSN/MATERIAL:5975013866568
DELIVERY (IN DAYS):0229
DELIVER FOB: ORIGIN
SPE4A7-26-T-605X
SECTION B
PR: 7017697438 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/28/2027 Original Required Delivery Date:03/28/2027
SPE4A7-26-T-605X NSN/Part Number: 5975-01-386-6568 Quantity: 7 PR Purchase Request: 7017697438QTY: 7 Delivery: 229 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, DOME
Solicitation # SPE8E7-26-T-3451
The contract pertains to the procurement of 10 units of LIGHT,DOME with NSN 6220-01-706-9275 under solicitation SPE8E7-26-T-3451, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in full compliance with DLA packaging requirements, specifically RP001, and labeled per MIL-STD-129. If not classified as hazardous under FED-STD-313, it must be commercially packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. The packaging must adhere to specified Unit of Issue and Quantity per Unit Pack, with palletization following DLA guidelines. The delivery destination is FB5682 at Cargo Movement Element Building 1029 in Aviano, Italy, with transportation governed by DLAD procedural notes C19 and C20. The contract includes strict quantity variance limits of zero percent, meaning no over or under shipment is permitted. All documentation, including technical and quality requirements referenced by R or I numbers, is governed by the DLA Master List, with revision control tied to the solicitation issue date. The item is identified by multiple revision levels of technical data packages referencing drawing numbers 78286 and 78550-02801, and must be marked and traceable as specified. The point of contact is Kelly Mitchell, and the order is tied to project ACV TP 3 with government-only identifiers for tracking and disposition.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, COCKPIT, AIRCR
Solicitation # SPE4A6-26-T-11FR
This contract pertains to the procurement of a commercial off-the-shelf (COTS) item identified as LIGHT, COCKPIT, AIRCR with part number OX43721-02 and NSN 6220016778099, for a single unit to be delivered within 20 days under the solicitation SPE4A6-26-T-11FR. The item is classified as a critical application item and requires strict adherence to multiple technical and quality standards, including DLA’s Master List of Technical and Quality Requirements, FAA airworthiness approval, and specific marking and packaging directives such as MIL-STD-2073-1E and MIL-STD-129. The supplier must comply with DLA packaging and preservation standards, apply the fragile marking code, and ensure palletization in accordance with DLA procurement guidelines. Traceability documentation must be retained in alignment with DLAD Procurement Note C03 from August 2016, and all delivery must be shipped via traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination, with zero non-conformances required for acceptance unless otherwise stipulated, and sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan. The item is subject to FAA-specific certification and marking requirements, including a Certificate of Airworthiness and Conformance, and configuration changes are governed by formal engineering change proposal and variance procedures. The delivery destination is Edwards Air Force Base, California, with all documentation and compliance responsibilities placed squarely on the contractor.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4534
This contract specifies the procurement of 13 battery chargers under NSN 6130-01-681-7918 with a total quantity of 13 units to be delivered FOB destination within 131 days, by December 23, 2026. The product is identified as the NOCO Company model GB500 with part number 54095, and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. Packaging and palletization must adhere to DLA packaging requirements, with no quantity variance permitted. Inspection and acceptance occur at the destination, and all items must be marked according to specified protocols, including the use of special marking codes and compliance with hazardous materials shipping procedures. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampling unless otherwise stated. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. The contract includes detailed shipping instructions to the DLA Distribution facility in New Cumberland, Pennsylvania, and references applicable DLA procedural notes for transportation. All requirements are tied to the solicitation number SPE7L7-26-T-4534 and subject to DLA’s official unit of issue guidelines.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
DIRECTIONAL LIGHT, V
Solicitation # SPE4A6-26-T-11CS
The contract pertains to the procurement of 14 units of Directional Light, V, identified by NSN 6220-14-564-9580 and part numbers F1600 P/N 0009741028 and F6416 P/N 2BA 003 014-117, under solicitation SPE4A6-26-T-11CS. The unit price is $14.00 per unit, totaling $196.00, with a strict quantity variance of plus or minus 0 percent. Delivery is required within 144 days from contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E, including specific packaging methods, materials, and container codes, with marking required per MIL-STD-129 and a fragile special marking code. Palletization must comply with DLA Packaging Requirements for Procurement. The delivery address is DLA Distribution at DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a need ship date set for January 2, 2027. Documentation for source approval is mandatory, and covered defense information applies. The contract is managed by the ASC Commodities Division under the Department of Defense, with primary point of contact Thanh Hue Nguyen.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHA
Solicitation # SPE7L7-26-T-4537
This contract pertains to the procurement of 13 units of a commercial off-the-shelf battery charger adapter, identified by part number BTA-70100-148 and NSN 6130-01-706-9251, manufactured by BREN-TRONICS DEFENSE LLC. The item is classified as COTS with adequate catalog data available for evaluation, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede any conflicting standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified in the contract, and attribute classifications must adhere to predefined verification levels or AQLs. All packaging must conform to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 packaging requirements, and all items must be properly marked and labeled per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity of 13 units must be delivered within 115 days of contract award, with no variance permitted in quantity. The sole delivery point is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, as specified in the parcel post and freight shipping addresses. The unit of issue is each (EA), and the total contract value is based on a unit price of $13.00 per item. The procurement follows DoD unit of issue standards and is subject to DLA procedural notes C19 and C20 regarding transportation. The solicitation was issued under SPE7L7-26-T-4537 with a response deadline of August 13, 2026, and the required ship date is December 7, 2026, with the coverage of Covered Defense Information potentially applying per RD003.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4541
The contract pertains to the procurement of six battery chargers with the NSN 6130-01-696-7699 and part number GCMCUH manufactured by GETAC INC, under solicitation SPE7L7-26-T-4541. The delivery is required in 196 days, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit price is $6.00 per unit, totaling $36.00, with no quantity variance allowed. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Marking and identification of the bare item and packaging must meet all DLA specifications, and the unit of issue is each (EA). Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the required ship date coincides with the original delivery deadline of February 26, 2027.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE7M2-26-Q-0705
This contract specifies the procurement of electrical insulation sleeving identified by NSN 5970-00-954-1624, with a total quantity of 25,530 feet to be delivered within 150 days after award. The product must comply with the SAE AS23053C Revision C standard dated November 1, 2023, and its specified part number M23053/5-107-0, which governs its technical design and performance. It is classified as a commercial item and a critical application item, requiring strict adherence to all referenced specifications without deviation. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds except in narrow, predefined applications such as batteries, fluorescent lamps, sensors, or weapon systems, and mandates shock-proof design with secondary containment for portable devices containing mercury in compliance with NAVSEA 5100-003D. Ozone-depleting chemicals are strictly forbidden, and any substitute chemicals must be submitted for approval unless explicitly authorized. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization governed by DLA’s packaging requirements. Inspection and acceptance both occur at destination, with a zero-tolerance quality control standard mandating zero non-conformances in the sample lot under MIL-STD-1916, ASQ H1331, or an equivalent zero-based sampling plan. Attributes not otherwise defined are treated as major with a specified AQL of 1.0. The items are not required to have Item Unique Identification as per DFARS 252.211-7003(c)(1)(i), though other quality provisions including Qualified Products Lists, Configuration Change Management, and the removal of government identification from rejected supplies remain enforceable. Covered defense information may apply, and all technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List. The contract is issued under solicitation SPE7M2-26-Q-0705 by the Department of Defense’s Nuclear Reactor Program, with delivery destined to Tinker AFB.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4533
The contract is for the procurement of 78 units of a charger and battery with NSN 6130-01-706-1846 under solicitation SPE7L7-26-T-4533, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 52 days of award, with FOB origin terms, and inspection and acceptance will occur at the destination. The unit of issue is each (EA), with a fixed quantity and zero variance allowed. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 packaging guidelines, with all items marked and labeled accordingly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned corresponding verification levels. Physical identification of individual items must adhere to RQ017 requirements. The delivery destination is DLA Distribution at 2083 Normandy Drive, New Cumberland, PA, with a required ship date of October 5, 2026. Payment is set at $78.00 per unit, totaling $6,084.00, and the procurement is subject to all applicable DLA transportation and logistics directives including DLAD PROC NOTES C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M1-26-T-245D
The contract specifies the procurement of one starter motor with NSN 6110-01-108-4340 and part number 177B5462G1S2, supplied by WARD LEONARD CT LLC, under solicitation SPE7M1-26-T-245D. Delivery is required within 158 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. The item is designated as a critical application item, and all packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. The unit of issue is each, and the delivery must be shock-proof with mercury containment standards strictly enforced, permitting mercury only in specific functional components like batteries, sensors, or instruments as defined by NAVSEA, requiring secondary containment for portable fluorescent lamps and instruments per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling for this procurement. The original required delivery date is August 10, 2027, though an earlier ship date of January 19, 2027, is requested. Transportation and shipping details are governed by DLA procedural notes, and the contract is subject to federal acquisition regulations under the NAICS code 335999, with Michael Reese as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4539
The contract specifies the procurement of sealed lead acid battery chargers under NSN 6130-01-564-9082, with a total quantity of four units distributed across three CLINs: one unit each for two destinations and two units for a third, all scheduled for delivery within 20 days of contract award. The items are commercial off-the-shelf products with no tolerance for quantity variance, delivered FOB origin, and subject to inspection and acceptance at the destination. Strict packaging standards are mandated, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA packaging requirements for palletization, with special labeling indicating Type I shelf life status. The batteries have a non-extendable 12-month shelf life and must adhere to DLA’s technical and quality requirements as defined in the DLA Master List, with sampling governed by MIL-STD-1916 or equivalent zero-based plans requiring zero non-conformances. All items must be shipped via traceable means, prohibiting parcel post, and are subject to Defense Information protection requirements. The contract, issued under solicitation SPE7L7-26-T-4539, is a total small business set-aside with a response deadline in August 2026 and required delivery dates falling between July and August 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-11FD
This contract is for the procurement of 53 electrical contact brushes identified by NSN 5977-01-369-1592 and part number 10456458, supplied by Wiggins Lift Co Inc and Delco Remy America Inc. The item is classified as a critical application item with strict compliance requirements, including adherence to DLA packaging standards MIL-STD-2073-1E and marking standards MIL-STD-129, with no special marking required. The product must be delivered FOB origin within 152 days by January 10, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, PA. The contract prohibits the intentional use of mercury or mercury compounds in the product or any direct contact with it, except for specific permitted uses such as batteries, fluorescent lamps, sensors, and weapon systems, with portable mercury-containing devices requiring a secondary containment barrier per NAVSEA 5100-003D. Mercury is also strictly forbidden in preservation, packaging, and labeling. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition type. The contract is issued under solicitation SPE4A6-26-T-11FD, with a purchase request number 7017696389, and is subject to DLA transportation and freight protocols.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A7-26-T-606A
This contract specifies the procurement of five terminal lugs with NSN 5940-01-008-6727 under solicitation SPE4A7-26-T-606A, which is a total small business set-aside with a NAICS code of 335931. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. All items require physical identification or bare part marking in accordance with specified guidelines. Sampling and inspection follow MIL-STD-1916 or an approved zero-based equivalent, with verification levels and AQLs assigned based on attribute criticality unless otherwise stated. Zero non-conformances are required for acceptance unless the contract specifies otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. DFARS 252.225-7048 applies, and covered defense information is protected under RD003. The contracting office is the Department of Defense, specifically ASC Supplier Operations AE and AF Division, with Jessica Gentry as the primary point of contact.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-605C
The contract specifies the procurement of a spacer sleeve identified by NSN 5365-01-721-8998 and part number 92510A236, with a quantity of 14 units to be delivered within 10 days FOB origin. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the product is source-controlled, meaning it must be manufactured and tested using limited rights data accessible only to approved vendors with traceability to authorized sources. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances mandated unless otherwise stated. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The item must be palletized according to DLA packaging guidelines and shipped to the delivery address at US Army SSA Powidz AB in Poland. The contract prohibits government provision of proprietary technical data and requires vendors to demonstrate access to approved manufacturing sources. Delivery is subject to zero variance, inspection and acceptance occur at the destination, and transportation rules follow DLA procedural notes. The solicitation expires August 10, 2026, with an original required delivery date of July 31, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
PLATE, IMAGING, RADIATIO
Solicitation # SPE4A7-26-T-606M
The contract pertains to the procurement of 10 units of a radiation imaging plate, identified by NSN 6635-01-606-4999, under solicitation SPE4A7-26-T-606M, with a required delivery date of October 18, 2026, and a final delivery window of 170 days. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date. Hazardous material restrictions are strictly enforced: mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, fluorescent lamps, sensors, or specified reagents, and any permitted mercury-containing portable lamps or instruments must be shockproof with a secondary containment boundary as defined by NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and DLA Packaging Requirements, with marking adhering to MIL-STD-129 and no special marking required. Sampling and inspection protocols mandate zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The item is to be delivered FOB origin to a designated DLA receiving point in Tracy, California, with no quantity variance permitted. The contract enforces full compliance with DLA transportation procedures and requires adherence to standardized unit of issue and packaging codes, with all documentation and marking aligned to federal military and procurement standards.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A7-26-T-605E
This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-605N
The contract specifies the procurement of a Terminal Board identified by NSN 5940-01-128-2240 and part number ST5M1379-006A, with an approved quantity of 148 units at a unit price of $148.00, resulting in a total contract value of $21,904. The item is classified as a critical application component, with approved suppliers including The Boeing Company, Trico Manufacturing Inc., RMB Miniature Bearings Inc., and Stroco Manufacturing Inc. Deliveries are required FOB origin, with inspection and acceptance occurring at the destination, and all units must be delivered within 154 days of contract award, with the original required delivery date set for January 12, 2027. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, with DLA requirements taking precedence. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. All packaging and palletization must comply with DLA’s RP001 requirements, and items must be marked in compliance with RQ017 for physical identification. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract includes mandatory documentation for source approval, removal of government identifiers from non-accepted items, and all requirements are governed by the DLA Master List revision in effect on the solicitation date.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
GENERATOR, OXYGEN-NI
Solicitation # SPE4A7-26-T-605B
The contract pertains to the procurement of one Oxygen-NI Generator, identified by NSN 3655-01-680-9902 and part number HPCF-K02-0110-GG, manufactured by South-Tek Systems, LLC, with technical and quality requirements aligned to the DLA Master List and referenced engineering drawing NR 5B5M3 11B4550216 Revision A dated January 28, 2022. The item must adhere to stringent specification controls, including configuration change management through Engineering Change Proposals, and is subject to Covered Defense Information protocols. Quality assurance protocols mandate sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 03-03 Method 50, while palletization follows DLA-specific requirements. The generator is to be delivered FOB origin within 20 days, with no variance permitted in quantity, and inspection and acceptance occur at the destination location. Delivery is directed to the 1st Armored Division Sustainment Brigade at Fort Bliss, Texas, with shipment required via traceable means—parcel post is prohibited. The contract is issued under solicitation SPE4A7-26-T-605B, a Total Small Business Set-Aside under NAICS code 333998, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026. The purchase request number is 7017659301, and the unit of issue is each. The item is designated for government use with assigned codes including IPD 12, DIC A0A, and tracking identifiers such as TCN W8001Z62030574 and RDD 218. Supplier compliance with all technical and quality requirements referenced in the DLA Master List is contractually binding, and any deviations require formal variance requests.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ARMOR, SUPPLEMENTAL,
Solicitation # SPE4A7-26-T-606G
The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333618
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A7-26-T-605M
The contract pertains to the procurement of a pressure transmitter, identified by NSN 6620-00-974-6488 and part numbers 209-060-602-11 from Bell Textron Inc. and 381065-007 from Simmonds Precision Products Inc., with a required quantity of four units. Delivery must be completed within 20 days of contract award, shipped FOB origin, and subject to zero variance in quantity. Inspection and acceptance both occur at the origin, with packaging strictly following MIL-STD-2073-1E and marking in accordance with MIL-STD-129, including the special code for delicate instrument handling. Packaging and palletization must comply with DLA’s standardized requirements, and the item is classified as a critical application item. The contract incorporates technical and quality standards referenced from the DLA Master List, and sampling procedures must align with MIL-STD-1916 or a zero-defect comparable plan unless otherwise stated. A Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required, reflecting heightened cybersecurity obligations. All government identification must be removed from non-accepted supplies, and physical identification of bare items is mandated. The delivery destination is the Taiwan Army’s Zuoying Ammunition Sub-Depot in Kaohsiung, with no alternative freight forwarders permitted without adherence to specific DLA procedural notes. The solicitation was issued under SPE4A7-26-T-605M with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD ASSEMBLY, TURNL
Solicitation # SPE4A7-26-T-605K
The contract is for the procurement of 20 units of a STUD ASSEMBLY, TURNLOCK FASTENER with part number ET223AA3-12C and NSN 5325-01-473-2537, sourced from AVIBANK MFG. INC. located in North Hollywood, CA. All items must comply with MIL-STD-130N dated 16 Nov 2012 for identification marking of U.S. military property and adhere to DLA packaging requirements as outlined in RP001. Technical and quality standards referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The contract mandates the removal of government identification from non-accepted supplies as per RQ011. Delivery is required within 238 days after contract award, with the place of performance designated as Tracy, CA, 95304-5000. The solicitation number is SPE4A7-26-T-605K, issued on August 2, 2026, with responses due by August 10, 2026, under NAICS code 332722, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Naron Sanderlin reachable at naron.sanderlin@dla.mil or 4457374458.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CONTROL, INFRARED SE
Solicitation # SPE4A7-26-T-606E
The contract pertains to the procurement of two units of Control, Infrared SE with NSN 5850-01-595-9396 under solicitation SPE4A7-26-T-606E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of contract award, shipped FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization adhering to DLA’s packaging standards. The item must be shipped using the fastest traceable means and is explicitly excluded from parcel post delivery; the freight shipping address is in San Diego, California, with a designated hazmat receiving location. The required delivery date is July 27, 2026, and the solicitation response deadline was August 10, 2026, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Special marking is not required, and the unit of issue is each, priced at $2.00 per unit for a total of $4.00. Government-specific identifiers such as IPD, DIC, and ADV codes are included for internal use.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details