Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

BLOCK, DRY BATH

Awarded

SPE2DH-26-T-6389Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Medical Supply Chain FSH under the Department of Defense, is for the procurement of eight dry bath blocks under solicitation number SPE2DH-26-T-6389. The specified components are designed for use with digital and touch screen dry baths or block heaters, specifically compatible with manufacturer part 88870008. Each block measures 76x124x39mm and is designed to hold 24 tubes with a 13mm diameter. The contract identifies the item by NSN 6640-01-683-1563 and requires delivery within 20 days after the order is placed. Compliance with DLA master technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies, is mandatory. The response deadline for this federal acquisition is September 8, 2026.

General Info

DoD procurement of eight dry bath blocks, NSN 6640-01-683-1563, due September 8, 2026.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$916

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

AP, USA

Set-Aside

NONE

Awardee

GOVERNMENT SCIENTIFIC SOURCE INC

Award Issued Date

09/15/2026, 12:00:00 AM UTC

Documents

2

SPE2DH-26-T-6389 Request for Quotations

19 pages · rfq

High

SPE2DH-26-V-3152 - Order for Supplies or Services

award

High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedSep 1

Solicitation

AwardedSep 15

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Tina Vu

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DH26V3152 posted on DIBBS. Awardee: GOVERNMENT SCIENTIFIC SOURCE INC (CAGE 0S908) Total Contract Price: $916.00 Award Date: 09-15-2026 Solicitation: SPE2DH-26-T-6389 Line items: - BLOCK, DRY BATH (NSN/Part 6640016831563, PR 7018116557)

Similar Contracts

Same NAICS industry code

Optical Modulator (No Substitutions)

Solicitation # AB484554

Brookhaven National Labor -Doe Contractor

POSTED

about 2 hours ago

DEADLINE

CSS - Upgrading PExA 2.1 to Vial-Based (PExA Cap)

Solicitation # 75N98027Q00044

National Institutes Of Health Olao

POSTED

about 2 hours ago

DEADLINE

Seahorse XF HS Mini Analyzer

Solicitation # TAMHSC-ITB-27-0653

Texas A&M University System Health Science Center is soliciting bids under solicitation number TAMHSC-ITB-27-0653 for the procurement of one Seahorse XF HS Mini Analyzer. The required equipment must include an embedded Windows 10 controller and XF HS Mini cell culture microplates, with the final delivery destination located in Kingsville, Texas. The solicitation was posted on October 28, 2026, and the deadline for responses is November 11, 2026, at 2:00 p.m. CST. All bids must be submitted electronically through the AggieBid portal, as late submissions will not be accepted. The primary point of contact for this procurement is Kristina Kanevsky, and administrative oversight is managed by Texas A&M University Procurement Services in College Station, Texas.

Texas A&M University System Health Science Center

POSTED

about 17 hours ago

DEADLINE

Seahorse XF HS Mini Analyzer with ControllerThis subcontract involves the procurement and delivery of one Seahorse XF HS Mini Analyzer system for prime contractors working on Texas A&M University laboratory projects. The scope of work includes providing the analyzer hardware and integrating an embedded Windows 10 controller to ensure the system is fully functional upon delivery to Kingsville, Texas. All equipment must strictly adhere to the technical specifications provided through the AggieBid portal. The opportunity is managed by Texas A&M University under NAICS code 334516. Interested parties must note the posted date of October 28, 2026, with a response deadline set for November 11, 2026. Detailed solicitation information and submission portals are hosted via the university's designated bidding system.

Texas A&M University

POSTED

about 18 hours ago

DEADLINE

Seahorse XF HS Mini Analyzer

Solicitation # TAMHSC-ITB-27-0653

Texas A&M University has issued an Invitation to Bid under solicitation number TAMHSC-ITB-27-0653 for the procurement of one Seahorse XF HS Mini Analyzer. The required equipment must include an embedded Windows 10 controller and XF HS Mini cell culture microplates. The final product is to be delivered to Kingsville, Texas. The solicitation was posted on October 28, 2026, with a response deadline of November 11, 2026, at 2:00 PM CST. Bids should be submitted electronically through the AggieBid portal, although email and physical delivery to College Station, Texas, are listed as alternate methods. For manual submissions, bidders must use official Texas A&M forms and include a W9. Primary contact for the procurement is Kristina Kanevsky, and general inquiries can be directed to the purchasing department. Detailed technical specifications are hosted within the AggieBid portal.

Texas A&M University

POSTED

about 18 hours ago

DEADLINE

Hydraulic Fluid Contamination Analysis Kit SupplierThis subcontract opportunity is for the supply of six complete hydraulic fluid contamination analysis kits to support prime contractors on DLA Troop Support Medical Supply Chain projects. The supplier is responsible for manufacturing or sourcing kits that strictly adhere to NSN 6630001506486 specifications and comply with DLA Master List of Technical and Quality Requirements RA001, RP001, RQ001, and RQ011. The successful contractor must possess the necessary hydraulic fluid analysis instrumentation to ensure all deliverables meet these technical standards. Managed by the Department of Defense under the Medical Supply Chain FSH, this project is designated as a Total Small Business Set-Aside under NAICS code 334516. Performance will take place in Jacksonville, Florida. Interested parties must submit their responses by the deadline of November 4, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

Supplier of Aircraft Cockpit Lights (NSN 6220016516453)This subcontract involves the manufacture or distribution of 41 specialized aircraft cockpit lighting units for prime contractors supporting DLA Distribution Depot Oklahoma projects. The required components are identified by NSN 6220016516453 and Hoffman Engineering part number 721-1237-1028, with performance taking place at Tinker AFB. The contract is designated as a Total Small Business Set-Aside under NAICS code 334516. All supplied units must strictly adhere to the DLA Master List technical and quality requirements as well as Buy American regulations. The response deadline for this Department of Defense opportunity is November 9, 2026.

POSTED

about 21 hours ago

DEADLINE

Supply of Heat Detectors (NSN 6350017310949)This subcontract involves the procurement and delivery of two heat detector units for prime contractors serving the Defense Logistics Agency. The required hardware is identified by NSN 6350017310949 and Manufacturer Part Number 3001-312 from Meggitt Safety Systems Inc, and must be produced in accordance with Technical Data Package Rev A Gen 1. Performance for this contract will take place in Virginia Beach. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334516. To be eligible, providers must ensure full compliance with NIST SP 800-171 DOD Assessment Requirements. The response deadline for this requirement is November 9, 2026.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Electrode Assembly Fabrication (NSN 6160-01-118-4721)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the fabrication of seven warranted electrode assemblies under NSN 6160-01-118-4721 and Evoqua part number W3T105304. The project involves precision machining of critical application items that must strictly adhere to RA001 technical requirements and RQ017 marking standards for bare items. Quality assurance is governed by MIL-STD-105/ASQ Z1.4 standards to ensure all deliverables meet rigorous military specifications. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 334516. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to provide the necessary manufacturing capabilities to support these DLA supply contract requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Supply of Borescope Kits (NSN 6650-01-590-6625)This subcontract involves the procurement or manufacture of six Borescope Kits meeting NSN 6650-01-590-6625 specifications for prime contractors supporting Department of Defense supply contracts. The supplier must adhere to the DLA Master List of Technical and Quality Requirements (RA001) and strictly ensure that no unauthorized additive manufacturing processes are utilized during production. The contract is designated as a Total Small Business Set-Aside under NAICS code 334516. All compliant kits are to be delivered to the DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. The response deadline for this requirement is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

GAGE, WING FOLD JURY

Solicitation # SPE8E5-27-T-0357

Solicitation SPE8E5-27-T-0357 is a federal procurement issued by the DLA Troop Support Construction and Equipment office for one Wing Fold Jury Gage, identified by NSN 5220-00-922-6223 and Northrop Grumman part number 123GT10191. The requirement is not a small business set-aside. The original required delivery date is October 26, 2026, with a delivery window of five days after the award. The item must be shipped via the fastest traceable means to the DLA Receiving Officer at Naval Base Coronado in San Diego, California, with FOB terms set to destination. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and the use of the Wide Area Workflow system for electronic invoicing and payment. Inspection and acceptance will occur at the destination point. All quotes must be submitted through the DIBBS portal.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 21 hours ago

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0316

Solicitation SPE2DH-27-T-0316, issued by the DLA Troop Support Medical Supply Chain FSH, is for the procurement of one package of Draeger Carbon Dioxide 100/A-P measuring tubes (NSN 6630-12-189-3126). These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases within a range of 100 to 3000 parts per million for one liter of air. Each package contains 10 units. The required delivery timeframe is 20 days after order, with the destination for delivery and inspection being the USS ST LOUIS LCS 19. The contract mandates strict adherence to medical packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Items must be delivered in sealed unit containers and commercial exterior shipping containers. A critical shelf-life requirement of 24 months applies, with a stipulation that no more than three months may have elapsed from the date of manufacture to the date of government delivery. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The award is subject to various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material labeling standards.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Concession Services – Tracy, CA

Solicitation # NAFUA1-26-R-0003

The Defense Logistics Agency is soliciting proposals under solicitation NAFUA1-26-R-0003 for cafeteria and mobile food truck services at the Defense Distribution Depot San Joaquin in Tracy, California. This is a revenue-generating concessionaire contract where the contractor provides all labor, management, and equipment to operate two cafeterias in Building 100 and Building 16, a mobile food truck, and general catering services for over 1,200 personnel. In exchange for operating these facilities, the contractor will pay the Nonappropriated Fund Instrumentality either a monthly concessionaire fee or a percentage of gross sales, whichever is greater. The period of performance consists of a two-year base period from December 30, 2026, to December 29, 2028, with eight subsequent one-year option periods. Proposals are due by November 2, 2026, at 3:00 PM EST and must be submitted in two separate volumes covering commission percentages, financial capabilities, and operational plans. Award selection is based on the best overall value, with primary emphasis placed on the feasibility of the business plan, relevant past performance, and menu innovation. Contractors must adhere to strict food safety and packaging standards, including compliance with Tri-Service Food Code and Army Regulations, and ensure all food handlers are inoculated against Hepatitis A. Eligible offerors must maintain active registration in the System for Award Management and provide a unique entity identifier.

Food Service Contractors

POSTED

about 2 hours ago

DEADLINE

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Identification Marker SupplierThis subcontract involves the supply of seven identification markers, NSN 7690-01-693-4155, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected supplier is responsible for the fabrication and assembly of these markers in strict accordance with TDP Rev A Gen 1 and REFERENCE QAP 13873. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-2073-1E along with RP001 DLA Packaging Requirements for packaging. Additionally, the provider must provide valid manufacturer and distributor codes to fulfill the requirements of this Department of Defense procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 21 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 21 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS