This Solicitation opportunity from Department Of Defense was posted on July 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BLOOD RECIPIENT SET, IN
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The blood recipient set for indirect transfusion is a Y-type administration set designed for medical use, featuring two pre-pierced Y-sites, a removable micron filter with a drip chamber, and a blood bulb pump positioned adjacent to the needle adapter. Each set includes roller clamps on both tubing legs connected to the drip chamber, with a drop rate of approximately 20 drops per milliliter and an overall length of about 80 inches. The tubing has an inner diameter of 0.120 inches and is sterilized. Units are packaged in quantities of 48 per package, with each unit requiring proper sealing in a protective container to prevent damage or breakage. Commercial packaging standards apply, and exterior shipping containers must ensure safe, cost-effective delivery to the specified point of delivery using common carriers, with export packaging when necessary. All units must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear labels indicating the date of manufacture, expiration or retest date, contract number, and lot number. The product must have a shelf life of 36 months, with no more than five months elapsed from the date of manufacture to the date of delivery to the government. Packaging and labeling must conform to the latest revision of MMS1A. The NSN is 6515-01-128-1407, and the solicitation number is SPE2DS-26-T-276N, with a delivery requirement of 20 days after order award. Bidder submissions must include the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract applies to all medical acquisitions with full compliance mandated for government procurement.
General Info
Agency
NAICS
Place of Performance
BLDG 1509 WEST 6TH STREET, FORT STEWART, GA, 31314-5185, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
BLOOD RECIPIENT SET,INDIRECT TRANSFUSION
Y-TYPE BLOOD ADMINISTRATION SET;MACROBORE<(>,<)>
2 PIERCING DEVICES,PRE-PIERCED Y SITE<(>,<)>
REMOVABLE MICRON FILTER AND DRIP CHAMBER<(>,<)>
BLOOD BULB PUMP ADJACENT TO NEEDLE ADAPTER;
ROLLER CLAMPS ON EACH TUBING LEG CONNECTED TO
DRIP CHAMBER;APPROX. 20 DROPS PER ML;
APPROX. OVERALL LENGTH:80 IN (203.2 CM);
0.120 IN TUBING ID. STERILIZED. PACKAGE OF 48.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: PACKAGE (48 PER PG OR CASE)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DS-26-T-276N
SECTION B
1 PG = 48 EA
SHALL HAVE A SHELF LIFE OF 36 MONTHS.
NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-128-1407 Quantity: 1 PG Purchase Request: 7017630641QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS