Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

BLOOD RECIPIENT SET, IN

Active
SPE2DS-26-T-322MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The blood recipient set for indirect transfusion is a Y-type administration set designed for safe and controlled blood transfusion procedures, featuring two pre-pierced Y-sites, a removable micron filter, and a drip chamber with a blood bulb pump positioned adjacent to the needle adapter. Each set includes roller clamps on both tubing legs, delivers approximately 20 drops per milliliter, and has an overall length of about 80 inches with a tubing inner diameter of 0.120 inches. The product is sterilized and packaged in quantities of 48 units per package, with a required shelf life of 36 months; no more than five months may have elapsed from the date of manufacture to the date of government delivery. All units must be properly sealed in commercial packaging to prevent damage and shipped in suitable exterior containers that ensure safe, low-cost delivery to the designated point of performance, which is Camp Pendleton, 92055-5657. Labeling must conform to Medical Marking Standard No. 1, including the date of manufacture, expiration or retest date, and contract or lot number, replacing all prior references to MIL-STD-129. The acquisition is governed by the solicitation SPE2DS-26-T-322M, with a total quantity of six packages required and a 20-day delivery window. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and packaging must adhere to DLA’s specific procurement standards. The product is classified under NSN 6515-01-128-1407 and NAICS code 339999, and suppliers must clearly state the source and part number being offered. The contract is managed by the Department of Defense’s Medical Supply Chain, with Dorothy Marquis as the primary point of contact. All applicable defense information regulations are in effect, and supplies must be marked according to MMS1A to ensure compliance with modern medical logistics standards.

General Info

Y-type blood transfusion set with micron filter, 36-month shelf life, 48 units per package, delivered to Camp Pendleton by 20-day deadline.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

BOX 555657, CAMP PENDLETON, CA, 92055-5657, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-322M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS

Full Description

Show more
BLOOD RECIPIENT SET,INDIRECT TRANSFUSION
BLOOD RECIPIENT SET,INDIRECT TRANSFUSION
Y-TYPE BLOOD ADMINISTRATION SET;MACROBORE<(>,<)>
2 PIERCING DEVICES,PRE-PIERCED Y SITE<(>,<)>
REMOVABLE MICRON FILTER AND DRIP CHAMBER<(>,<)>
BLOOD BULB PUMP ADJACENT TO NEEDLE ADAPTER;
ROLLER CLAMPS ON EACH TUBING LEG CONNECTED TO
DRIP CHAMBER;APPROX. 20 DROPS PER ML;
APPROX. OVERALL LENGTH:80 IN (203.2 CM);
0.120 IN TUBING ID. STERILIZED. PACKAGE OF 48.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: PACKAGE (48 PER PG OR CASE)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SPE2DS-26-T-322M
SECTION B
1 PG = 48 EA
SHALL HAVE A SHELF LIFE OF 36 MONTHS.
NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1A.
ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-128-1407 Quantity: 6 PG Purchase Request: 7017773350QTY: 6 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339999
New
Federal
FMS Case: ZB-B-WDR_KENYA
Solicitation # ZB-B-WDR_26_KENYA
This Foreign Military Sales (FMS) procurement for Kenya, identified as solicitation ZB-B-WDR_26_KENYA, is a Small Business Set-Aside under NAICS code 339999, requiring vendors to submit technical and pricing proposals exclusively through the Unison Marketplace portal. Vendors must complete all designated green cells in RFQ Attachments 1 and 2, providing precise unit prices and quoting the exact color or pattern specified in Column D, while also submitting detailed technical documentation that clearly demonstrates compliance with each part number’s specifications. Any proposed alternative materials require a side-by-side comparison against the referenced part numbers, with clear identification of compliance points through highlighting, circling, or similar means. Proposals must be single, final submissions with no multiple options, as the Government will evaluate initial submissions without requesting revisions, although it retains the right to seek clarification during evaluation. Technical acceptability is a pass/fail criterion, and award will be made on a Lowest Price Technically Acceptable (LPTA) basis, with the Government reserving the right to make multiple awards to different vendors if no single offeror fulfills all requirements or offers fair and reasonable pricing for all items. All items must be available for pick-up within the continental United States, with a single U.S.-based shipping address required for all deliveries; drop shipments are prohibited, though partial shipments are acceptable. Pricing will be assessed for fairness and reasonableness under FAR 15.404-1, and insufficient data may trigger requests for additional non-certified information. Compliance with the Berry Amendment is mandatory, requiring vendors to affirm that products are manufactured in the United States using domestic materials, and an explicit certification must be provided that no IFF (Identification Friend or Foe) technology is included. Payment and shipping instructions will be issued via Wide Area Workflow (WAWF) at the time of award, and the Government retains full discretion to cancel the solicitation at any time due to lack of funds, with no liability for proposal costs. The submission deadline is 1:00 PM EST on 20 August 2026, with all questions due by 12 August 2026, and only proposals submitted through the Unison Marketplace portal will be considered. Offerors must be registered small businesses under SBA guidelines, and while specific packaging, marking, or preservation standards are not detailed, compliance with the RFQ’s technical and logistical instructions will form the core of acceptability.
Xr W4QS US Army Contracting Agy

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
Federal
FMS Case:ZB-B-VTD_TAIWAN
Solicitation # ZB-B-VTD_26_TAIWAN
This solicitation is a Foreign Military Sales (FMS) case for TAIWAN, issued under the solicitation number ZB-B-VTD_26_TAIWAN by the U.S. Army Contracting Agency, with the Department of Defense as the overseeing agency. It is a Small Business Set-Aside under NAICS code 339999 and requires vendors to submit technical and pricing proposals exclusively through the Unison Marketplace by 1:00 PM EST on 20 August 2026. All proposals must include fully completed green cells in RFQ Attachments 1 and 2, with precise adherence to the color and pattern specified in Column D, and must provide detailed, side-by-side technical comparisons demonstrating how the proposed items meet each specified part number requirement—highlighted or circled for clarity. NSNs are for reference only; compliance is based solely on the part number and color criteria defined in the attachments. The evaluation is conducted under a Lowest Price Technically Acceptable (LPTA) methodology, meaning technical acceptability is assessed first on a pass/fail basis, with award going to the lowest-priced qualified offer. Multiple awards may be made if no single vendor fulfills all requirements, with each award limited to the line items for which a vendor submitted a technically acceptable and lowest-priced proposal. Vendors must submit only one quote per item—with no alternatives or options permitted—and must certify compliance with the Berry Amendment and confirm the absence of IFF technology. All items must be made available for pickup within the continental United States at one designated shipping address, with drop shipments strictly prohibited. The Government may request additional price analysis data under FAR 15.404-1 if deemed necessary but will not request revisions after submission and may ask questions solely to clarify proposals. Award is contingent upon the availability of funds, and the government reserves the right to cancel without penalty. Wide Area Workflow (WAWF) and shipping details will be provided at award time.
Xr W4QS US Army Contracting Agy

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
Federal
FMS Case: TU-B-UDO_TUNISIA
Solicitation # FMS_TU-B-UDO_RFQ
This procurement is a Foreign Military Sales (FMS) case for the Republic of Tunisia, soliciting equipment through a Small Business Set Aside under NAICS code 339999, with awards limited to small businesses only. Vendors must submit a single, unambiguous proposal through the Unison Marketplace portal by 1:00 PM EST on 20 August 2026, fulfilling all instructions in RFQ Attachment 1, including completion of designated green cells and accurate reporting of color and pattern as specified. Technical compliance is mandatory, requiring vendors to provide clear, side-by-side comparisons demonstrating how their proposed products meet each part number specification listed in Column B, with exact matches highlighted or circled. Alternative materials are permitted only if accompanied by a detailed justification that directly aligns with the required specifications. The award will follow the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is a pass/fail criterion and price reasonableness is determined solely through analysis under FAR 15.404-1; no trade-offs between cost and technical merit are allowed. No revisions or multiple options will be accepted, and the Government retains the right to request clarification but will not allow proposal amendments post-submission. All items must be available for pickup within the continental United States, with one designated shipping address per vendor and drop shipments strictly prohibited. Partial shipments are acceptable, and final shipping and invoicing instructions will be provided via Wide Area Workflow (WAWF) at the time of award. The Government may make multiple awards if no single vendor meets all line items, selecting the lowest technically acceptable offeror for each eligible item. Proposal compliance includes mandatory certifications for Berry Amendment adherence and explicit declaration that the items do not include IFF technology. The contract is contingent on available funding, and the government may cancel without liability. All information submitted in the RFQ spreadsheet becomes part of the final award, and submissions received outside the Unison Marketplace will be rejected.
Xr W4QS US Army Contracting Agy

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-325A
The product is an abdominal pad composed of multiple layers including absorbent fibers backed by a nonabsorbent fiber layer, covered with gauze or nonwoven fabric, with an alternative construction using cellulose wadding backed by nonabsorbent cotton and similarly covered. Each unit is packaged in a case of 144 pads and must maintain a shelf life of 36 months from manufacture, with no more than six months elapsed between manufacture and delivery to the government. All containers must be clearly marked with the lot or control number and the date of manufacture, prefixed with MFD. The item is identified by NSN 6510-01-271-7671 with a purchase quantity of six cases and a delivery requirement of 63 days after order award. The solicitation number is SPE2DS-26-T-325A, issued on August 9, 2026, with proposals due by August 17, 2026, under NAICS code 339112 for medical device manufacturing. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance occurring at APO ZIP 96260-5479 and primary point of contact Anh Lam via email and phone. The procurement follows DLA packaging requirements and incorporates technical and quality standards listed in the DLA Master List, with applicable revisions governed by the solicitation or amendment date. Government identification must be removed from any nonaccepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTURE
Solicitation # SPE2DS-26-T-323F
The contract is for the procurement of acupuncture needles specified as silver plated spiral wound handle, 0.35mm diameter by 75mm length, manufactured from sterile, disposable stainless steel and identified by the NSN 6515-01-673-6604, with a unit of issue of one box containing 100 needles. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, which must be reviewed in its version effective on the solicitation issue date or award date, depending on the acquisition type. Packaging must comply with DLA packaging standards, and government identification must be removed from any supplies not accepted. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-323F, was posted on August 9, 2026, with a response deadline of August 17, 2026, and is categorized under NAICS code 339112 for medical equipment manufacturing. It is a federal procurement under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with performance delivery set for Hampton, Virginia, 23665-2040. The single purchase request calls for one box, with delivery required within 20 days of award. Primary point of contact is Dorothy Marquis at the provided email and phone number, and all bids must be submitted through the DIBBS portal prior to the deadline. Covered defense information may apply, and compliance with all applicable technical, quality, and packaging provisions is mandatory for acceptance.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIA, SALMONEL
Solicitation # SPE2DS-26-T-322Z
This contract pertains to the procurement of Culture Media, specifically Salmonella Shigella Agar and Xylose Lysine Deoxycholate Agar, identified by NSN 6550-01-358-3835 and manufacturer part number R02140 from REMEL INC. The items are classified as Type I (Code A) with a strict non-extendable shelf-life of one month and require refrigeration between 2 and 8 degrees Celsius throughout storage and transport. The product is regulated by the FDA and must be supplied with full disclosure of the source and part number. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers designed to prevent damage, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. Delivery is required FOB destination within 20 days, and the packaging must adhere to MIL-STD-2073-1E standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract falls under a federal solicitation with NAICS code 621410 managed by the Department of Defense’s Medical Supply Chain. Covered Defense Information may apply, and bidder information must be submitted to the product specialist via EBS for FDA confirmation prior to award.
Family Planning Centers

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339113
New
DIBBS
LITTER, RIGID, SEA-AIR, M
Solicitation # SPE2DS-26-T-324M
The contract calls for the procurement of two rigid sea-air medical evacuation litters, designated by NSN 6530-01-187-0104, with a delivery requirement within 20 days after award. Each litter measures 80 inches in length and 16.5 inches in width, constructed with a stainless steel or corrosion-resistant metal frame and a special cloth stretcher, designed to be folded in half, hoisted vertically or horizontally, backpacked, and carried without hands, enabling transport into confined spaces. The litters must be orange in color and include a urethane-coated carrying case. Mercury or mercury-containing compounds are strictly prohibited unless used in functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Bidders are required to provide the source and part number of the litters being offered. The solicitation, issued under SPE2DS-26-T-324M with a response deadline of August 17, 2026, is managed by the Department of Defense’s Medical Supply Chain, with the place of performance in Jacksonville and primary point of contact Lisa Thomas-Wright.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334510
New
DIBBS
CONNECTOR, SURGICAL
Solicitation # SPE2DS-26-T-325F
The contract pertains to the procurement of a surgical connector made from corrosion-resistant metal, specifically a Diamond O2 quick connector with a DISE male fitting and check valve, designed for use with oxygen tubing. Each unit is sold individually, with a total order quantity of ten units identified by the NSN 6515-01-457-0271 and required for delivery within five days of award. The item falls under the NAICS code 334510 and is part of a federal solicitation issued by the Department of Defense’s Medical Supply Chain, with performance located in San Antonio, Texas. All units must be packaged in sealed commercial containers that protect against damage and meet the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Shipping containers must ensure safe delivery via common carrier at the lowest feasible rate, and all packaging must comply with DLA packaging requirements. The product is subject to Defense Information that may be controlled, and technical and quality compliance standards referenced as R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders are required to specify the source and part number being offered, and the solicitation’s response deadline is August 17, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327992
New
DIBBS
DENTAL KIT, EMERGENCY
Solicitation # SPE2DS-26-T-325D
The DENTAL KIT, EMERGENCY is a standardized medical supply containing a dental exam mirror, dental stick, toothbrush, toothpaste, dental floss, cotton-tipped applicators, oil of cloves, temporary cavity filling material, aspirin, and a gauze pad, all packaged as a single unit for immediate use. The kit must be delivered to the government within two months of manufacture and is subject to strict shelf-life requirements as a TYPE I (CODE H) item with a non-extendable 12-month shelf life. The product is regulated by the FDA, and bidders must provide the manufacturer name, part number, and source details, with the specified part number being 700014 from MYHRE'S EXPLORATION PRODUCTS, INC. All packaging must comply with commercial standards and MIL-STD-2073-1E, and items must be marked in accordance with Medical Marking Standard No. 1, ensuring protection from damage and safe transport via common carrier to the delivery point at Travis Air Force Base, California. The unit of issue is each (EA), with a contract quantity of one unit, delivery due within 20 days FOB destination, and no variance allowed in quantity. The solicitation falls under NAICS code 327992 and is governed by DLA technical and quality requirements referenced in the DLA Master List, with the contracting official required to submit an FDA referral through EBS including all manufacturer and bidder details.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339112
New
DIBBS
CEMENT, ORTHOPEDIC SURG
Solicitation # SPE2DS-26-T-325Z
The contract specifies the procurement of a radiopaque orthopedic surgical cement set, supplied as a unit of issue containing ten each of sterile powder and liquid monomer components. Each set includes a 40-gram sterile powder mixture of polymethyl methacrylate, methyl methacrylate styrene copolymer, and barium, along with a 20-milliliter sterile liquid monomer ampule. The product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and delivery to the government. All packaging must meet commercial standards, with each unit sealed in a protective container to prevent damage and shipped in suitable exterior containers optimized for safe, low-cost delivery to the specified point in Williamsburg, Virginia. Markings on all containers must include the lot or control number and date of manufacture preceded by “MFD” and conform to Medical Marking Standard No. 1, which replaces MIL-STD-129. The material is classified as hazardous, requiring compliance with 49 CFR and ICAO regulations for transport, and a current Material Safety Data Sheet (MSDS) must accompany each shipment and be submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6515-01-153-5275, the solicitation number is SPE2DS-26-T-325Z, and delivery is required within five days after delivery order.
Surgical and Medical Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details