This Solicitation opportunity from Department Of Defense was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BOL T, SHEAR
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract involves the procurement of four units of a bolt shear identified by the National Stock Number 5306-00-927-4181 and part number NAS654V20, manufactured in accordance with the applicable non-government standards NAS653 through NAS658, with the latest revision dates referenced. All hardware must conform to the current revision of the relevant part standards and meet strict quality and technical requirements as detailed by the Defense Logistics Agency (DLA) Master List of Technical and Quality Requirements. Sampling and inspection processes follow MIL-STD-1916 or ASQ H1331, with critical attributes subject to rigorous verification levels, ensuring compliance with detailed gauging requirements for threads. Identification markings must comply with MIL-STD-130N standards, alongside mandated manufacturer markings. Packaging must adhere to ASTM D3951 standards but with precedence given to DLA master list requirements, including marking and labeling in line with MIL-STD-129. Palletization should meet the DLA's RP001 requirements. The contract stipulates FOB origin delivery within five days, with inspection and acceptance at the origin point. Shipments are to be sent to specified government logistics facilities including locations in Beltsville, MD, and San Diego, CA, via the fastest traceable means, explicitly excluding parcel post. The contract is managed by the Department of Defense's Aviation Supply Chain organization under solicitation SPE4A1-26-T-1992, with the response deadline on May 15, 2026, and delivery expectation by May 4, 2026. The primary point of contact for this procurement is Jade Stringfield from DLA.
General Info
Agency
NAICS
Place of Performance
7000 MUIRKIRK MEADOWS DR, STE 100, BELTSVILLE, MD, 20705-6351, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
BOLT SHEAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
REVIEW CRITICAL APPLICATION
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
SPE4A1-26-T-1992
SECTION B
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
IAW BASIC NON GOVT STD NAS653 THRU 658
REVISION NR 11 DTD 02/29/2016
PART PIECE NUMBER: STD P/N NAS654V20
IAW REFERENCE NON GOVT STD NAS621
REVISION NR 14 DTD 05/31/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016568990 0001 EA 4.000
NSN/MATERIAL:5306009274181
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
UY9008
ASRC FEDERAL FACILITIES LOGISTICS
7000 MUIRKIRK MEADOWS DR, STE 100
BELTSVILLE MD 20705-6351
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE4A1-26-T-1992
SECTION B
PR: 7016568990 PRLI: 0001 CONT’D
UY9008
ASRC FEDERAL FACILITIES LOGISTICS
FRC-SOUTHWEST/PEB NAS NORTH ISLAND
BUILDING 1454, DOOR 10
SAN DIEGO CA 92135
US
M/F: (TCN) UY900861181498
RDD: 777
PROJ: FSW TP 1
SUPP ADD: N65888 SIG: B
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: G00 ADV: 2L FC: GC
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE4A1-26-T-1992 NSN/Part Number: 5306-00-927-4181 Quantity: 4 EA Purchase Request: 7016568990QTY: 4 Delivery: 5 days ADO