This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BOLT, AUTOMATIC WEAP

Closed

SPE7L3-26-T-123PFederal

Submission Closed07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

10--JURY STRUT ASSEMBLY

Solicitation # SPE7LX-26-U-002F

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of five Jury Strut Assemblies under NSN 1055-01-127-8293. The contract is a total small business set-aside with a delivery requirement of 259 days after order. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Due to the nature of the items, the contract mandates compliance with demilitarization protocols for small arms parts and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # 46600-eRFQ-001981-2027

The Georgia Department of Public Safety, through the Georgia Public Safety Training Center, has issued solicitation 46600-eRFQ-001981-2027 to procure Staccato holsters. This Request for Quotes was posted on September 10, 2026, with a response deadline of September 16, 2026. The contract will run from the date of award through the end of the state's current fiscal year, which concludes on June 30, with the state maintaining four optional one-year renewal terms. Qualified suppliers must submit their responses via the GA@WORK Marketplace, including a completed cost worksheet, tax compliance forms, and a certificate of non-collusion. Evaluation criteria include cost, minimum experience, and a review of business litigation or debarment history over the last five years. Preference is given to businesses domiciled in Georgia. The procurement process also requires the submission of E-Verify forms and adherence to strict prohibitions regarding inmate contact. Kaylee Maynor serves as the primary point of contact for this solicitation.

Department of Public Safety

POSTED

DEADLINE

Manufacture of Mortar Plungers (NSN 1010017148005)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Weapon System Component (NSN 1005-00-714-6365)

POSTED

DEADLINE

Supply of Gun Carriage Assemblies (NSN 1005-01-504-2915)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Manufacturing (Piston, Gun Gas Cylinder)

POSTED

DEADLINE

Supplier of Small Arms Cleaning Pull-Throughs (NSN 1005-01-478-2261)

POSTED

DEADLINE

Supply of 30mm Small Arms Bore Cleaning Brushes

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Resilient Weapon System Mounts (NSN 5342-00-143-0673)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Bracket Assembly (NSN 1005015972362)

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract is for the procurement of 20 units of BOLT, AUTOMATIC WEAPON, identified by NSN 1005-99-848-0609, under solicitation SPE7L3-26-T-123P, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office. Delivery is required 122 days after order placement, with a firm delivery date of December 1, 2026, and all items must be delivered FOB destination to the DLA Distribution New Cumberland Facility in Pennsylvania. The item is classified as a Category I munition under DoDM 4160.28-Vol.3 and is subject to strict demilitarization requirements. Packaging must adhere to ASTM D3951 and take precedence from the DLA Master List of Technical and Quality Requirements, with palletization following RP001 and all marking and labeling conforming to MIL-STD-129, including barcoding and proper unit of issue and quantity per unit pack specifications. The contract mandates compliance with cybersecurity requirements, necessitating a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 standards, along with safeguarding covered defense information as per DFARS 252.204-7012. The supplier must comply with all applicable FAR and DFARS clauses, including those governing equal opportunity, combating human trafficking, employment eligibility verification, and sustainable procurement, as well as special requirements for hazardous material labeling under DFARS 252.223-7001, which requires disclosure and adherence to Hazard Communication Standards or specified alternative federal statutes. Supply chain security is enforced through prohibitions on covered defense telecommunications equipment and services under DFARS 252.204-7018, requiring full disclosure of equipment OEMs and distributors with their UEI and CAGE codes. All payments must be processed via Wide Area WorkFlow (WAWF), and the contractor must have an active SAM registration with accurate size status and socioeconomic certifications, including any joint venture partner information. Inspection and acceptance occur solely at the destination by government personnel, with no tolerance for quantity variance. The solicitation closed on July 31, 2026, and submissions were required through the DIBBS portal, with no formal evaluation factors or contract type explicitly defined, implying a simplified acquisition process under a likely fixed-price structure.

General Info

Procure 20 automatic weapons, deliver FOB destination by Dec 1, 2026, comply with CMMC 2, NIST, DFARS, and MIL-STD-129.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-123P for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 20

Solicitation

Response DeadlineJul 31

Deadline has passed

Submission Closed

07/31/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressUSA

Contacts

KATELYN YOUNG

contact@example.gov

+1 (555) 000-0000

Full Description

BOLT,AUTOMATIC WEAP
BOLT, AUTOMATIC WEAPON.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
,,
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) ,,
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
UTM LIMITED KE396 P/N 01-2010
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528018 0001 EA 20.000
NSN/MATERIAL:1005998480609
DELIVERY (IN DAYS):0122
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7L3-26-T-123P
SECTION B
PR: 7017528018 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/01/2026 Original Required Delivery Date:12/01/2026
SPE7L3-26-T-123P NSN/Part Number: 1005-99-848-0609 Quantity: 20 EA Purchase Request: 7017528018QTY: 20 Delivery: 122 days ADO