Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A6-26-U-3399Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 16,254 machine bolts under NSN 5306-00-639-8810. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside and falls under NAICS code 332721. Delivery is required within 158 days after receipt of order. The procurement is fully competitive and adheres to specific military and federal specifications. It incorporates several technical and quality requirements, including DLA packaging standards, tailored higher-level quality requirements for manufacturers, and specific protocols for inspection, acceptance at origin, and bare item marking. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026.

General Info

DoD seeks 16,254 machine bolts via SDVOSB set-aside; responses due September 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SDVOSBC

Documents

(1)

SPE4A6-26-U-3399.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
JEFFREY BROWN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5306-00-639-8810 Quantity: 16,254 EA Purchase Request: 1000241770QTY: 16254 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3379
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 4,375 machine bolts under NSN 5306-00-151-1417. The contract is designated as a HUBZone set-aside and falls under NAICS code 332721. Delivery is required within 97 days after receipt of order. The agreement incorporates several technical and quality requirements, including DLA packaging standards, inspection and acceptance at origin, and specific physical identification and bare item marking. While covered defense information applies, item unique identification is not required per the service customer. The procurement is fully competitive and adheres to military and federal specifications.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3384
This solicitation is for the procurement of 132 machine bolts under NSN 5306-00-406-8072 for the Department of Defense ASC Commodities Division. The contract is designated as a total small business set-aside under NAICS code 332721. Delivery is required within 43 days after the order is placed. The items are classified as commercial products and must adhere to DLA packaging requirements and technical standards. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Hardware must be manufactured according to the current revision of the applicable military or consensus non-government part standard.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3412
This contract is a solicitation for the procurement of 2,092 machine bolts, identified by NSN 5306008161170 and part number NAS563-35. The item is classified as a commercial critical application item and must be manufactured according to the current revision of the applicable non-government part standard. Delivery is required within 61 days, with FOB, inspection, and acceptance all occurring at the origin. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. While physical identification must follow MIL-STD-130N, item unique identification is not required for this specific order. This is a total small business set-aside under NAICS code 332721.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3351
This contract is for the procurement of 808 machine bolts, identified by NSN 5306000871631 and part number MS16208-12. The items must be manufactured according to the current revision of the NASM16208 and MIL-DTL-1222J standards, with a specific requirement to use MS16208 part numbers rather than superseding them with MS35307. The delivery timeframe is 97 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-130N. Quality assurance will be conducted using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. This is a HUBZone set-aside solicitation issued by the Department of Defense ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-26DB
This solicitation is for the procurement of 62 machine bolts under solicitation number SPE4A6-26-T-26DB for the Department of Defense. Offerors are encouraged to provide quantity ranges to accommodate volatile demands and must certify that they will not provide covered telecommunications equipment. Compliance with domestic material restrictions, including the Berry Amendment and Buy American Act, is mandatory, and any non-domestic materials must be disclosed. The contract requires a delivery timeframe of 81 days after order. All contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additionally, additive manufacturing is prohibited unless specifically authorized. Small business joint ventures must submit specific representations and certifications, and those unable to quote by the deadline should submit a No Bid status with an anticipated quote date via DIBBS.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3361
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 168 machine bolts under NSN 5306-00-156-2347. The contract is a total small business set-aside with a delivery requirement of 74 days after receipt of order. Technical specifications are governed by NASM3-20 Rev-5 and NASM6812, with dimensions and tolerancing adhering to ASME Y14.5. Part marking must comply with MIL-STD-130, although item unique identification is not required per the service customer. The agreement incorporates several critical quality and security mandates, including CMMC Level 2 self-assessment and the handling of covered defense information. Contractors must adhere to DLA packaging requirements and specific quality conformance inspection standards, including inspection and acceptance at origin. Additionally, the release of technical data to foreign-owned or influenced companies requires approval from the Foreign Disclosure Office. All supplies must be produced according to the most current military and industry standards applicable as of the contract effective date.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3354
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-3354, is for the procurement of 7,929 machine bolts identified by NSN 5306-00-097-7307. The contract is designated as a Total Small Business Set-Aside under NAICS code 332721, with a required delivery timeframe of 121 days after order. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging and configuration change management standards. Notably, the contract contains technical data subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory training to access restricted data.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3433
This contract is for the procurement of 148 machine bolts, identified as NSN 5306008071213 and part number MS35307-329. The items are classified as critical application commercial items and must be manufactured according to the current revision of the applicable part standard. Delivery is required within 158 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict quality and technical compliance, including adherence to DLA packaging requirements and MIL-STD-130N for physical identification. A First Article Test report, including dimensional inspection and material chemical analysis, must be submitted to DLA Troop Support for approval. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3382
This contract is for the procurement of 890 machine bolts, identified by NSN 5306005435568 and part number MS16208-47. The items are classified as critical application items and must adhere to technical specifications including MIL-DTL-1222J, reference drawing 53711 T9074-AS-GIB-010/271, and NASM16208. Delivery is required within 125 days, with both inspection and acceptance occurring at the origin. The agreement mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. This is a total small business set-aside solicitation issued by the Department of Defense ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-25YY
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 342 machine bolts under NSN 5306-00-274-2119. The contract requires delivery within 171 days after receipt of order and is being procured as a fully competitive acquisition based on military or federal specifications. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, tailored higher level quality requirements, and inspection and acceptance at the origin. Additionally, the contract mandates compliance with Covered Defense Information and CMMC Level 2 Self-Assessment. While physical identification and bare item marking are required, Item Unique Identification is not necessary for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-26AT
This solicitation is for the procurement of machine bolts, specifically part number 5306-00-211-8173, with a quantity of 23 units and a delivery requirement of 154 days after receipt of order. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must certify that they will not provide covered telecommunications equipment or services. The contract requires strict adherence to domestic material restrictions, including the Berry Amendment and the Buy American Act, with mandatory disclosure for any non-domestic materials used. Prospective bidders must use the DIBBS system for quotes and are advised to submit a no bid status if they anticipate a delay in quoting to keep the buyer informed. Additionally, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer. Small business joint ventures are required to submit specific representations and certifications regarding their business status as part of their offer.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-25MH
This solicitation is for the procurement of 68 machine bolts under contract SPE4A6-26-T-25MH, with a delivery requirement of 213 days after order. The opportunity is a total small business set-aside and requires offerors to certify that they will not provide covered telecommunications equipment or services. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act. Key administrative requirements include the mandatory registration via the Account Management and Provisioning System for Vendor Shipment Module access and the prohibition of additive manufacturing processes unless specifically authorized. Small business joint ventures must provide specific representations and certifications. If an offeror cannot quote by the closing date, they are instructed to submit a No Bid response with an anticipated quote date to maintain communication with the buyer.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BF
This contract is for the procurement of blind rivets, specifically part number NAS1921B05-03 under NSN 5320001652084. The total quantity requested is 14,171 units, split between two delivery locations: 4,121 units to DLA Distribution San Diego and 10,050 units to DLA Distribution Warner Robins. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable military or non-government part standards. Delivery is required within 99 days, with specific need ship dates in May and July 2026 and a final required delivery date of March 2, 2027. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, SPRING
Solicitation # SPEA46-26-U-3352
This contract is for the procurement of 1,117 spring pins, identified by NSN 5315-00-004-3134 and part number NAS561S3-12. The order is a total small business set-aside under the Department of Defense, ASC Commodities Division, with a delivery requirement of 71 days after the order is placed. Delivery and inspection are set as FOB Origin, and the items are classified as critical application items. The supplier must adhere to strict quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with RP001 and MIL-STD-2073-1E. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where specifically authorized for functional components.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-26AF
This contract is for the procurement of 20 feet of electrical insulation sleeving, identified as NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a commercial critical application item and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturers List or Qualified Products List. It has a 12-month extendable shelf life and must adhere to SAE AS23053/1 standards. The agreement specifies a delivery timeframe of 20 days and requires compliance with DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-25ZJ
This contract is for the procurement of 6,977 blind rivets, identified as a critical application commercial item under NSN 5320010903166. The items must be manufactured in accordance with the current revisions of non-government standards NAS9305 and NAS1686. Quality assurance requires sampling based on MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The delivery is set for 171 days after order, with a required delivery date of April 5, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING HALF SET, SLEEV
Solicitation # SPE4A6-26-T-25ZB
This contract is for the procurement of 619 units of bearing half sets, sleeve, identified by NSN 3120-00-843-6994. The unit of issue is defined as two half sleeves per each unit. The delivery is required within 171 days, with a need ship date of March 1, 2027, and delivery is set as FOB Origin with inspection and acceptance occurring at the destination. The items are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and the prohibition of mercury or mercury-containing compounds in the hardware and packaging. It specifies that each sleeve must be wrapped in neutral paper to prevent damage. The items are designated as critical application items and must comply with specific part numbers from approved manufacturers such as Oshkosh Defense, Rolls-Royce Solutions America, Penske Power Systems, and Federal-Mogul Corporation.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SPLIN
Solicitation # SPE4A6-26-T-26BX
This contract is for the procurement of 5,359 self-locking spline nuts under NSN 5310010540004. The items are identified as commercial products, with specific part numbers associated with Huck International, Inc. and Fastener Technology Corp. Delivery is required within 46 days after the order, with a final required delivery date of May 28, 2027, shipping FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information standards. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract is designated as a HUBZone set-aside under NAICS code 332722 and is managed by the Department of Defense ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-26AK
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of four straight, headless steel pins measuring 1.25 inches in length and 0.5 inches in diameter. Identified by NSN 5315-00-058-9956, the items are being procured under a fully competitive process in accordance with military and federal specifications. Delivery is required within 20 days after the order is placed. The contract is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. It also notes that covered defense information potentially applies to this acquisition. Interested parties must respond by September 10, 2026, under solicitation number SPE4A6-26-T-26AK.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
RETAINER, TURNLOCK F
Solicitation # SPE4A6-26-T-26AZ
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock fastener ejector spring retainers, identified by NSN 5325-00-291-9360. The contract requires delivery within 256 days after order and is categorized under NAICS code 332119. Performance is designated for New Cumberland, Pennsylvania. The agreement includes stringent security and quality mandates, including CMMC Level 2 certification for third-party assessment and compliance with ITAR and EAR export controls. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD training to access technical data. Additionally, the contract adheres to DLA packaging requirements, physical identification marking, and specific higher level quality requirements as outlined in the DLA master list.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-26BW
This contract is for the procurement of 164 close tolerance screws, identified by NSN 5305-01-539-5971. The order is designated as a critical application item and lists several approved manufacturers and part numbers, including those from Fastener Innovation Technology, The Boeing Company, and Howmet Global Fastening Systems. Delivery is required within 171 days, with a need date of March 1, 2027, and shipment is to be delivered FOB origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Quality assurance involves inspection and acceptance at the origin, with a zero percent quantity variance allowed. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements for procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3393
This contract is for the procurement of 238 machine bolts, identified by NSN 5306006379158 and part number AN101127. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the applicable part standards, specifically referencing AN101101 through AN101200 and SAE AS7452. Delivery is required within 15 days after receipt of the order, with FOB and inspection/acceptance points set at the origin. Quality assurance is governed by SAE AS9100 and specific gauging requirements for Class 3A and 3B threads per FED-STD-H28/20. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA requirement RP001. Physical identification must adhere to MIL-STD-130N, although Item Unique Identification is not required by the customer.
Nonferrous Forging

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BU
This solicitation is for the procurement of 20 blind rivets under contract number SPE4A6-26-T-26BU for the Department of Defense ASC Commodities Division. The items are identified as critical application commercial hardware and must adhere to non-government standards NAS1674 and NAS1675. All hardware manufactured from the date of solicitation must comply with the current revision of these part standards. The contract mandates strict quality and sampling protocols, requiring adherence to MIL-STD-1916 or ASQ H1331 with a zero-based sampling plan. Delivery is required within five days after receipt of order, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-U-3414
This contract is for the procurement of 473 socket head cap screws made from a nickel copper alloy, class B, with dimensions of 0.050-13UNC-3A X 1.000 inch. The items are identified as commercial products and are designated as critical application items. The procurement is governed by specific gauging requirements for class 3A and 3B threads and must adhere to the current revision of the applicable part standards. Key requirements include strict compliance with DLA packaging and marking standards, specifically MIL-STD-130N and MIL-STD-129. The contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, and a Certificate of Quality Compliance is required. Delivery is expected within 92 days, with inspection and acceptance occurring at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details