This Solicitation opportunity from Department Of Defense was posted on May 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BOLT, SHEAR

Awarded

SPE4A6-26-T-37W0Federal

Submission Closed05/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Screw Thread Insert (NSN 5325-01-647-8996)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of a screw thread insert meeting NSN 5325-01-647-8996 specifications. The contractor is responsible for delivering one unit, ensuring that packaging adheres to MIL-STD-2073-1E Preservation Method 33 and marking complies with MIL-STD-129. Performance will take place at Camp Pendleton, California. The contract mandates strict adherence to domestic sourcing requirements per the Buy American Act and the Berry Amendment. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. Responses to this solicitation are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-14-51-4157-6)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machine Bolt Fabrication (NSN 5306015554678)This subcontract involves the fabrication of 609 specialized machine bolts under NSN 5306015554678 for the DLA Weapons Support ASC Commodities Division. All units must be produced according to Basic Drawing 19207 12419091 Revision C using precision machining equipment, with a strict prohibition on additive manufacturing. The contractor is required to ensure all materials are compliant with the Buy American Act and the Berry Amendment, and finished products must be packaged in accordance with MIL-STD-2073-1E. To be eligible, the provider must maintain CMMC Level 2 compliance and hold either an ISO 9001 or SAE AS9003 quality system certification. The project falls under NAICS code 332722 and will be performed in New Cumberland. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Hexagon Nuts (NSN 5310-01-723-0284)This subcontract involves the manufacture or sourcing of 50 inspected self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The hardware must strictly adhere to NSN 5310017230284, Basic Drawing NR 53711 8508014, and Part Piece Number 820-8508014-8-06A. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The contractor is required to follow specific military standards for quality assurance and logistics, including sampling per MIL-STD-1916 or ASQ H1331, and marking and packaging according to MIL-STD-129 and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with DFARS 252.225-7001. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310009143234)This subcontract involves the procurement of 2,000 flat washers, identified as NSN 5310009143234 and Part S8157N8-010, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with the DLA Master List of Technical and Quality Requirements. Delivery is required FOB Origin to Hill AFB, and the use of additive manufacturing is strictly prohibited. Compliance is mandatory across several critical standards, including MIL-STD-130N, MIL-STD-129, and ASTM D3951 for packaging. Additionally, the supplier must meet CMMC Level 2 cybersecurity requirements and adhere to the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Flat Washers (NSN 5310-01-723-4415)This subcontract involves the manufacture of 202 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 5310-01-723-4415, Goodrich Corporation part number 80-835, and TDP Rev A Gen 1 specifications. Production requires the use of precision machining or stamping equipment and materials that comply with the Buy American Act. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, with a strict prohibition on the use of hexavalent chromium. The final deliverable consists of 202 finished and inspected washers. The project is managed under NAICS code 332722 for the Department of Defense, with performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Pin-Rivet Collars (NSN 5320-01-177-3224)This subcontract involves the fabrication and supply of 869 Pin-Rivet Collars for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce the units according to NSN 5320-01-177-3224 technical specifications and adhere to DLA master list quality standards RA001, RC001, RP001, RQ011, and RQ017. Due to the nature of the components, the use of precision machining equipment is required, and all materials must comply with the Buy American Act. The completed units are to be delivered FOB Origin to the DLA Distribution Depot located at Tinker AFB, Oklahoma. This procurement falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract specifies the procurement of shear bolts meeting the military standard NAS6203 through NAS6220, Revision 13 dated 12/31/2024, with part number NAS6203-4 and NSN 5306-01-056-3194. All threads must conform to Class 3A and 3B dimensional standards as defined by System 22 of Fed-Std-H28/20, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. The items are designated as critical application hardware and require full compliance with the DLA Master List of Technical and Quality Requirements referenced by R numbers, including quality conformance inspection at origin, tailored higher-level contract quality requirements, and physical identification marking per MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer logos and material identifiers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise directed, and attributes are classified with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor respectively. A Certificate of Quality Compliance is required and must be submitted as specified in CDRL-COQC-26033. The hardware must be manufactured to the current revision of the referenced standard with no exceptions for past revisions beyond the solicitation date. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, all while adhering to the precedence of DLA standards over any general commercial standard. The total quantity ordered is 3,678 units, with delivery due within 74 days from origin under FOB origin terms, and the shipment must be delivered to DLA Distribution San Diego by the original required delivery date of January 1, 2027. The contract includes strict zero variance in quantity and requires all labeling, marking, and documentation to align precisely with DoD and DLA directives.

General Info

Procurement of 3,678 shear bolts meeting military standards, strict quality, delivery by January 1, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

Contract Value

$845.94

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Awardee

BOEING DISTRIBUTION SERVICES X, INC.

Award Issued Date

05/21/2026, 12:00:00 AM UTC

Documents

SPE4A6-26-T-37W0.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedApr 28

Solicitation

Deadline changedMay 6

Response deadline changed from May 6, 2026 to May 11, 2026.

AwardedMay 21

Contract was awarded

Submission Closed

05/11/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Tyler Greene

contact@example.gov

+1 (555) 000-0000

Full Description

BOLT,SHEAR
BOLT, SHEAR
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
SPE4A6-26-T-37W0
SECTION B
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD NAS6203 THRU NAS6220
REVISION NR 13 DTD 12/31/2024
PART PIECE NUMBER: P/N NAS6203-4
IAW REFERENCE QAP 13873 QAP-EQ003
REVISION NR D DTD 02/09/2023
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 CDRL-COQC-26033
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 13873 EI-010563194
REVISION NR DTD 03/26/2026
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016475155 0001 EA 3,678.000
NSN/MATERIAL:5306010563194
DELIVERY (IN DAYS):0074
DELIVER FOB: ORIGIN
SPE4A6-26-T-37W0
SECTION B
PR: 7016475155 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:07/20/2026 Original Required Delivery Date:01/01/2027
SPE4A6-26-T-37W0 NSN/Part Number: 5306-01-056-3194 Quantity: 3,678 EA Purchase Request: 7016475155QTY: 3678 Delivery: 74 days ADO