Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-02USFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 46 units of a shear bolt, identified by NSN 5306-01-182-5151 and part number PBF1394-4L12, manufactured by SPS Technologies LLC, under solicitation SPE4A6-26-T-02US. This is classified as a commercial item with critical application requirements and is subject to all DLA Master List of Technical and Quality Requirements that supersede other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise stated, with attribute verification levels specified for critical, major, and minor characteristics. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirements, and all materials must be marked per government specifications. The item is subject to removal of government identification if not accepted and may involve covered defense information. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is December 2, 2026, with a 141-day lead time. The sole delivery point is DLA Distribution San Joaquin in Tracy, California, and shipping must comply with DLA transport procedures. The contracted unit price is $46.00 per unit, totaling $2,116.00, and the contract was issued with a response deadline of July 16, 2026, under the NAICS code 332722 for the Department of Defense's ASC Commodities Division.

General Info

Defense Logistics Agency seeks 46 shear bolts by July 13, 2026, via solicitation SPE4A6-26-T-02US.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-02US Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Latoya Anderson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT,SHEAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SEE AMPL FOR SOURCES OF SUPPLY
CRITICAL APPLICATION ITEM
SPS Technologies, LLC DBA 80539 P/N 73142-4L12 SPS TECHNOLOGIES LLC 27624 P/N PBF1394-4L12
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017384823 0001 EA 46.000
SPE4A6-26-T-02US
SECTION B
PR: 7017384823 PRLI: 0001 CONT’D
NSN/MATERIAL:5306011825151
DELIVERY (IN DAYS):0141
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/02/2026 Original Required Delivery Date:12/02/2026
SPE4A6-26-T-02US NSN/Part Number: 5306-01-182-5151 Quantity: 46 EA Purchase Request: 7017384823QTY: 46 Delivery: 141 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
PARTS KIT, FASTENERThis contract covers the supply of a Parts Kit, Fastener with NSN/Part Number 1560-01-699-3344, for a quantity of 17 units, under solicitation SPE4A7-26-Q-0813. Delivery is required within 300 days of award, and the item is subject to strict export control regulations under either ITAR or EAR due to the presence of controlled technical data, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to this data is restricted to contractors approved by the Defense Logistics Agency who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have passed the DLA questionnaire. The supplier must also comply with CMMC Level 2 cybersecurity requirements as a certified third-party assessment organization and adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Physical identification and bare item marking are required, and non-accepted supplies must have all government identification removed. Inspection and acceptance must occur at the origin, and the contract includes stringent controls on the handling and dissemination of technical data as governed by DFARS 252.225-7048. The contracting activity is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with Latrice Brown listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 1,317 units of a hexagon cap screw identified by NSN 5305-01-519-8733 under solicitation SPE4A6-26-T-05PE, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions allowed only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier in compliance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract mandates adherence to MIL-STD-1916 or an equivalent zero-based sampling plan, with undefined attributes treated as major; inspection must result in zero non-conformances unless otherwise stipulated. All Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Items must be marked per MIL-STD-130N, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate either a CMMC Level 2 self-assessment or certification by a C3PAO. Packaging, identification, and quality assurance are subject to DLA-specific directives including RD002, RQ001, RQ011, and RQ017. The contracting office is the ASC Commodities Division under the Department of Defense, with performance taking place in New Cumberland, PA, and primary contact information provided for administrative correspondence.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, COMPRESThis contract is for the procurement of 124 helical compression springs with NSN 5360015960957 and part number H05352M, supplied by OPW Fueling Components Inc. Division 81718. The item is designated as a critical application component, requiring strict compliance with source control drawing requirements; only approved sources may supply the item, and non-approved offerors must submit a Source Approval Request along with technical documentation or proof of prior approval directly to DLA. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standard including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for specific functional applications listed in NAVSEA guidelines, and mandates secondary containment for any portable devices containing mercury. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at destination, and the required delivery date is February 3, 2027, with a need ship date of January 5, 2027. The unit of issue is each, and all packaging details must align with the contract’s specified QUP and DLA standards. The item is to be delivered to Industries of the Blind Inc. in Greensboro, NC, and transportation is subject to DLAD Procurement Notes C19 and C20. The solicitation was issued under SPE7L1-26-T-829F and closed for responses on July 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
PLUNGER, DETENTThe contract is for a single plunger, detent part identified by NSN 5340015960956 and vendor part number H00960RB, with a required delivery of one unit within 20 days of contract award. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to DLA standards, including MIL-STD-129 labeling, ASTM D3951 for non-hazardous materials, or TQ requirement IP025 if classified as hazardous under FED-STD-313, with palletization following RP001. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur at the delivery point. The item must be shipped via the fastest traceable method using RDD 777 and cannot be sent via parcel post; the destination is USS MARINETTE (LCS 25) at FPO AA 34088. The original required delivery date is June 30, 2026, and the solicitation was issued under contract number SPE7L3-26-T-116J with a response deadline of July 24, 2026. All shipments must reference the provided TCN and project codes, and government use identifiers must be applied as specified.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe item specified is a screw, cap, socket head, with a corresponding assembled washer, identified by NSN 5305-01-197-0416, with a quantity of one unit requested under purchase request 7017386460. Delivery is required within 20 days after date of order. This procurement is governed by solicitation SPE4A6-26-T-05NX, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of July 21, 2026. The NAICS code 332722 indicates the classification for screw, bolt, and nut manufacturing. The place of performance is FPO, ZIP 96667, and primary contact is Myonka Boyd, reachable via phone and email provided. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including those located within the United States, without prior authorization from the Department of State or Commerce. Export control obligations extend to U.S. companies and their foreign subsidiaries, and apply equally to foreign national employees. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. DFARS 252.225-7048 governs compliance with these restrictions.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details