Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-03CHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 25 BOLT, SHEAR units, identified by NSN 5306015834912 and part number NAS1956-26, manufactured in compliance with the current revision of the non-government standard NAS1953THRUNAS1970 Revision 7 dated 01/30/2015 and referenced in NAS9925. All threads classified as 3A and 3B must be gaged in accordance with SAE AS8879 or MIL-S-7742 for safety-critical applications, excluding self-locking nuts and threads smaller than .190 inches internal or .138 inches external diameter. The item is classified as a critical application and must meet tailored higher-level quality requirements, with inspection and acceptance occurring at the origin using a zero-based sampling plan consistent with MIL-STD-1916 or ASQ H1331, Table 1, where critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Identification marking must conform to MIL-STD-130N in addition to manufacturer logos, lot numbers, and material markings, and packaging must adhere to MIL-STD-2073-1E with Level B packaging, using designated preservation methods and containers. Marking for shipment must comply with MIL-STD-129, with no special markings required. The delivery is FOB origin, with a 20-day lead time from the required delivery date of July 8, 2026, and zero variance in quantity. The recipient is located in Mumbai, India, and the freight forwarder is Hawkeye Tracking, Inc., with the contract subject to DLA packaging and quality directives, and all hardware must be produced to the current revision of the part standard as of the solicitation date.

General Info

Procure 25 shear bolts NSN 5306-01-583-4912 by July 13, 2026, via DLA through DIBBS for DoD use.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-03CH DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Sommer Yates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT, SHEAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ALL CLASS 3A AND 3B THREADS SHALL BE GAGED
I/A/W CATEGORY 1 PER SAE AS8879 OR "SAFETY
CRITICAL THREADS" PER MIL-S-7742 UNLESS
OTHERWISE SPECIFIED. THE ABOVE EXCLUDES
SELF-LOCKING NUTS AND INTERNAL THREADS SMALLER
THAN .190 DIA. AND EXTERNAL THREADS SMALLER
THAN .138 DIA.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
SPE4A6-26-T-03CH
SECTION B
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1953THRUNAS1970 REVISION NR 7 DTD 01/30/2015 PART PIECE NUMBER: NAS1956-26
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NAS9925 REVISION NR DTD 07/31/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017390065 0001 EA 25.000
NSN/MATERIAL:5306015834912
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
PIN00R
HAWKEYE TRACKING, INC
47995 PINE HILL RUN ROAD
SPE4A6-26-T-03CH
SECTION B
PR: 7017390065 PRLI: 0001 CONT’D
POC: WILLIAM WOODS (240) 317-5269
LEXINGTON PARK, MD 20653
US
FREIGHT SHIPPING ADDRESS:
PINH00
THE COMMANDING OFFICER INS TUNIR
C O THE MATERIAL SUPERINTENDENT
MATERIAL ORGANIZATION
GHATKOPAR WEST MUMBAI 400
IN
MARKFOR
PINH00
THE COMMANDING OFFICER INS TUNIR
C O THE MATERIAL SUPERINTENDENT
MATERIAL ORGANIZATION
GHATKOPAR WEST MUMBAI 400
IN
M/F: (TCN) PINH5461668021
RDD:
PROJ: TP 2
SUPP ADD: PARGBD SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:07/08/2026
SPE4A6-26-T-03CH NSN/Part Number: 5306-01-583-4912 Quantity: 25 EA Purchase Request: 7017390065QTY: 25 Delivery: 20 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract pertains to the procurement of close tolerance screws identified by NSN 5305-01-064-4692 and part number C7985-3-3, with a total quantity of 3,354 units. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards unless otherwise specified. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes are subject to the most rigorous verification levels. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization conforming to DLA’s RP001 standards, and all marking and labeling must include proper government identification where applicable. The screws are designated as a critical application item, and documentation for source approval is required due to proprietary or insufficient data for competitive procurement. Delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and full compliance with DLA packaging and shipping directives including DLAD Proc Note C19 and C20 is mandatory. The required delivery date is January 13, 2027, with a 183-day lead time from contract award. The contracting office is the ASC Commodities Division under the Department of Defense, and all communications and submissions must reference the solicitation number SPE4A6-26-T-02TQ.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREWThe contract pertains to the procurement of 90 units of screw part number 1217B4210-61, identified by NSN 5305-01-259-3240, under solicitation SPE4A6-26-T-05TG, with a delivery deadline of 169 days after contract award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. The item must comply with strict packaging, handling, and inspection standards, including mandatory use of MIL-STD-1916 or equivalent zero-based sampling plans, with defined verification levels and AQLs for critical, major, and minor attributes. Any unspecified attributes are treated as major unless otherwise stated, and inspection methods may be chosen by the manufacturer unless contractually restricted. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the screw or any associated hardware, except for functional uses in specified items such as batteries, fluorescent lamps, sensors, weapon systems, or chemically regulated reagents as defined by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Technical data associated with the item is subject to export controls under ITAR or EAR, with disclosure to foreign persons—regardless of location—requiring prior authorization. Access is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal DLA approval. The point of contact for the solicitation is Bernice Adams, and performance is designated to Tracy, California, with the solicitation closing on July 21, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SIThe contract pertains to the procurement of a self-locking nut with a single ball seat and double design, identified by NSN 5310-00-815-2294 and part number ST3M468C5M, with an estimated quantity of 762 units. This is a simplified indefinite-delivery contract issued under the Small Business Set-Aside program under NAICS code 332722, with a maximum contract value of $350,000 and a guaranteed minimum quantity of 114 units. The item is classified as a commercial item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. Compliance with MIL-STD-1916, ASQ H1331, or an equivalent zero-based sampling plan is mandatory for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. All packaging must adhere to ASTM D3951 unless superseded by DLA requirements, and must be marked and labeled per MIL-STD-129 with palletization conforming to DLA Packaging Requirements for Procurement. Delivery is FOB origin with a 127-day timeline after order placement, and acceptance occurs at the destination. The contractor must ensure mercury or mercury compounds are not intentionally added to the product except in specific exemptions such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must be shockproof with a secondary containment boundary. Cybersecurity requirements necessitate a CMMC Level 2 self-assessment, and safeguarding of covered defense information is governed by DFARS 252.204-7012. All hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard, with hazard warning labels and Material Safety Data Sheets submitted before award. The contractor is subject to numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering employment equity, trafficking in persons, employment eligibility verification, whistleblower rights, cybersecurity reporting, prohibition of covered telecommunications equipment, and sustainable product compliance. Payment must be processed through the Wide Area WorkFlow system with proper documentation tailored to the line item type
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANEThe contract is for the procurement of 39 units of a screw assembly, panel, identified by NSN 5305-01-527-9845, under solicitation SPE4A6-26-T-02WL issued by the DLA Aviation, ASC Commodities Division, Department of Defense. Delivery is mandated within 161 days ADO with a required ship date of December 22, 2026, and the item must be delivered FOB Origin to the destination address in New Cumberland, Pennsylvania. The unit of issue is each (EA), with no variance permitted in quantity. Inspection and acceptance occur at the destination, and the contractor must comply with stringent quality control standards including sampling in accordance with MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based sampling plan, where critical, major, and minor attributes are governed by AQL levels of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Zero non-conformances are required in sample lots if MIL-STD-105/ASQ Z1.4 is used, unless otherwise directed. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including RT001 for measuring and test equipment, RC001 for source approval documentation, RP001 for DLA packaging standards, and RQ011 for removal of government identification from rejected supplies. Palletization and packaging must adhere to RP001 and MIL-STD-129, superseding ASTM D3951. The item is designated as a critical application and must be marked in accordance with RQ017, with identified part numbers linked to Square Deal Machining, Inc. and Lockheed Martin Corporation. Cybersecurity requirements mandate compliance with NIST SP 800-171 under DFARS 252.240-7997, with approved deviations in effect. The Buy American Act and Berry Amendment apply, restricting foreign material sourcing, and the contractor must submit Safety Data Sheets for any hazardous materials as a mandatory pass/fail criterion before award. Invoicing and payment must be processed through WAWF with a combined receiving report and invoice, and contractors must maintain active SAM registration and provide accurate socioeconomic representations. The contract prohibits internal confidentiality agreements, requires whistleblower protections, and en
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANEThe contract pertains to the procurement of 99 units of a screw assembly panel with part number 79717005-002, supplied by SQUARE DEAL MACHINING, INC. under CAGE code 6QQA3, and is designated by NSN 5305-01-527-8890. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging guidelines under RP001, with all items marked and labeled appropriately. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The delivery is FOB origin with a 49-day lead time, and inspection and acceptance occur at destination. The required ship date is May 24, 2026, with no quantity variance permitted. All packaging must be palletized per DLA requirements and shipped to the designated DLA distribution facility in New Cumberland, PA. The unit price is $99.00 per ea, totaling $9,801.00, and the contract is issued under solicitation SPE4A6-26-T-05SH by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details