BOLT, SHEAR

The contract is a Request for Quotations for 394 units of a BOLT, SHEAR with NSN 5306-00-080-0138, designated as a special high strength fastener critical to the Department of Defense Aviation Community. The part must conform to the MS21250-10014 configuration per DWG NASM21250 Rev 2 and DWG 2004154485 Rev E, with applicable notes 1 and 3, and meet all referenced technical data and standards, including compliance with either a military or consensus non-government part standard. Manufacturing, testing, and inspection must follow stringent quality requirements including 100% magnetic particle inspection of the manufacturing lot and stress durability testing per NASM1312-5 using the elongation, external loading, or strain gage method—torque loading is prohibited—with samples loaded to 75–80% of actual ultimate tensile strength and held for 72 hours. Thread dimensional conformance for Class 3A and 3B threads must be verified per System 22 of FED-STD-H28/20, and sampling follows MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan with zero non-conformances required for acceptance unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All items are subject to origin inspection and acceptance as mandated by FAR 52.246-2, with quality conformance enforced through DLA’s Master List of Technical and Quality Requirements, including RQ001, RQ006, RQ009, RQ011, and RQ017, which govern tailored higher-level quality controls, inspection and acceptance at origin, removal of government identification from non-accepted items, and bare item marking in accordance with MIL-STD-130N Paragraph 4.1.b(2), in addition to manufacturer logos and material identifiers. Packaging and labeling must adhere to ASTM D3951 and MIL-STD-129, with palletization complying with DLA Packaging Requirements RP001. Delivery is due within 33 days after receipt of