Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOOT ASSY, AUXILIARY

Active
SPE4A7-26-R-XB00Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense through the ASC Supplier OE and AF Division, is for the procurement of an auxiliary boot assembly, identified by NSN 1650-01-132-0794. The requirement is structured as an Indefinite Delivery Contract with a five year base period and a total contract value not to exceed 350,000 dollars. The estimated annual demand is 160 units, with delivery orders ranging from a minimum of 40 to a maximum of 160 units, and a required delivery timeframe of 125 days after receipt of order. This opportunity is designated as a total small business set aside. The contract is subject to stringent technical and quality standards, including CMMC Level 2 certification and adherence to the DLA master list of technical and quality requirements. Strict export controls apply under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export control training to access technical data. Additional requirements include specific DLA packaging standards, inspection and acceptance at origin, and compliance with MIL-STD-1916 for sampling and MIL-STD-129 for marking. Quotes for this solicitation are due by September 18, 2026.

General Info

DoD small business contract for auxiliary boot assemblies, max $350,000 over five years.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(2)

PID 1650-01-132-0794 - Boot Assembly, Auxiliary

PDF•specifications

SPE47-26-R-XB00 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Marian Edwards
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOOT ASSEMBLY, AUXILIARY. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1650-01-132-0794 Quantity: 1 EA Delivery: 125 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
54--TANK,LIQUID STORAGE
Solicitation # SPE8ED-26-T-1391
Contract SPE8ED-26-T-1391 is a solicitation issued by the Department of Defense via DLA Troop Support for the procurement of two liquid storage tanks. Each tank must have a 5 gallon capacity with dimensions of 10 3/4 inches in internal diameter and 14 11/16 inches in length. The items are identified by NSN 5430-01-486-2869 and part number 377-03203-000 from Johnson Controls Navy Systems, LLC. This is designated as a critical application item with a required delivery date of March 19, 2025, and a delivery window of 20 days after order. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking. It prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Shipping is designated as FOB Origin with destination inspection and acceptance, specifically destined for the USS MAHAN DDG 72. All shipments must be sent via the fastest traceable means, and the use of parcel post is explicitly prohibited.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
54--TANK,LIQUID STORAGE
Solicitation # SPE8ED-26-Q-0682
This solicitation, issued by the Department of Defense through DLA Troop Support under solicitation number SPE8ED-26-Q-0682, is for the procurement of 23 liquid storage tanks, identified by NSN 5430-01-696-1376. The contract requires a delivery timeline of 140 days after the order is placed. Quotations must be submitted via the DIBBS system by the deadline of September 21, 2026. Compliance requirements are stringent, as the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Prospective contractors must be CMMC Level 2 certified and possess an approved US/Canada Joint Certification Program certification to access technical data. Additionally, contractors must complete the required DLA training and questionnaires regarding the handling of export-controlled technical data to be eligible for distribution.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
SLED
Custom PVC Police Placards and Flags Supply
Orlando Police Department

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly Supply (NSN 4720014467715)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
MIL-SPEC Waterproof Packaging for Rubber Components
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
Synthetic Rubber O-Ring Supply (NSN 5331002882378)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
Supply of Cork and Rubber Sheet (NSN 5330-01-287-0495)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
Supply of Nonmetallic Hose Assemblies (NSN 4720014966446)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
Supply of Specialized Gaskets (NSN 5330-01-662-1584)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
RUBBER STOCK MOLDING, U
Solicitation # SPE7M2-26-T-6810
This fixed-price solicitation, issued by the DLA Land and Maritime Nuclear Reactor Program, seeks quotes for 11 kits of uncured rubber stock molding, specifically Dow Silicones Corporation part number RTV-4130-J. Each kit must consist of a 4 kg pail of silicone base and a 400 g bottle of curing agent. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 223 days, with a need ship date of May 3, 2027, and a final required delivery date of May 4, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will take place. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and labels compliant with OSHA's Hazard Communication Standard and 29 CFR 1910.1200 prior to award. Packaging must follow MIL-STD-2073-1E and RP001, with marking conducted per MIL-STD-129, including special marking code 33 for shelf life. Additionally, the supplier must ensure that no mercury or Class I ozone-depleting chemicals are intentionally added to the supplies. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
BELT, V
Solicitation # SPE7L5-26-T-5434
Solicitation SPE7L5-26-T-5434 is a Request for Quotations issued by DLA Land and Maritime, Land Supplier Opns Engines, for the procurement of four V-belts for John Deere tractors, identified by part number UC14244 and NSN 3030-01-733-6882. The procurement falls under NAICS code 326299. Quotations were due by September 21, 2026, with submissions encouraged via the DIBBS system. The original required delivery date is February 23, 2027, with a need ship date of March 9, 2027. Delivery is set as FOB Origin, with the destination and points of inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract incorporates several technical and quality requirements, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. It strictly prohibits the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are in effect, including the Buy American and Balance of Payments Program, the Berry Amendment, and various FAR and DFARS sections regarding equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 326299
New
DIBBS
RING BUOY, LIFESAVIN
Solicitation # SPE86-26-T-4394
Solicitation SPE8E6-26-T-4394 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of lifesaving ring buoys. The requirement consists of two line items, each for 5 units, totaling 10 units of NSN 4220016977643. The items are identified as commercial and must be delivered FOB Destination to the Defense Distribution Center in Yokosuka, Japan, or the Commander Fleet Act Yokosuka, with a delivery window of 20 days after award and an original required delivery date of January 23, 2026. The contract mandates strict adherence to quality and safety standards, including a total prohibition of asbestos and a restriction on the intentional addition of mercury. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must comply with the Buy American Act and Berry Amendment, utilize the Wide Area WorkFlow system for invoicing, and submit quotes via the DIBBS portal.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
Supply of Flexible Couplings (NSN 1660-00-560-4009)
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Supply of Plain Hexagon Nuts (NSN 5310-00-282-5658)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336412
New
DIBBS
Supply of Ferrule, Exciter-Rec
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Flat Washers (NSN 5310-00-995-1197)
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A7-26-R-XB13
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of one machine screw, identified by NSN 5305-01-150-6354. The contract requires delivery within 191 days after the order is placed. Technical and quality standards are governed by the DLA Master List, with specific mandates for source approval documentation, packaging, and the removal of government identification from non-accepted supplies. The contract contains strict security and legal requirements regarding covered defense information and export controls under ITAR and EAR regulations. Access to technical data is restricted to approved DLA contractors who possess a US/Canada Joint Certification Program certification and have completed mandatory export-control training. All technical data is subject to DFARS 252.225-7048, prohibiting unauthorized export or disclosure to foreign nationals.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A7-26-R-XB12
This contract is a solicitation for the procurement of one hexagon head cap screw, identified as a commercial item under NSN 5305-00-914-6130. The procurement is managed by the Department of Defense ASC Supplier OE and AF Division with a delivery requirement of 116 days after receipt of order. The item must be manufactured according to the current revision of the applicable military or consensus non-government part standard, with part numbering following ASME B18.2.1-1996. Quality assurance is strictly governed by DLA packaging and technical requirements, including critical item source inspection and specific gauging for Class 3A and 3B threads per FED-STD-H28/20. Sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, and identification marking must comply with MIL-STD-130N.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is a request for an Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of flexible couplings, identified as NSN 1660-00-560-4009. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. This item is designated as a Critical Application Item, with approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. The required delivery schedule is 365 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including source approval requests and tailored higher-level quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must complete a CMMC Level 2 self-assessment and comply with DFARS regulations regarding covered defense information and the Buy American program. Item Unique Identification is not required per the service customer's request. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A7-26-R-XB06
This procurement contract, solicitation number SPE4A7-26-R-XB06, is for the supply of one socket head cap screw (NSN 5305-00-472-3881) for the Department of Defense. The item is classified as a commercial product with a required delivery timeframe of 92 days after order. The contract mandates strict adherence to DLA packaging requirements, physical identification and bare item marking, and quality conformance inspections, including the submission of a Certificate of Quality Compliance. Sampling methods must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The contract includes significant security and regulatory compliance requirements. The provider must meet CMMC Level 2 certification and adhere to regulations regarding Covered Defense Information and the export control of technical data under ITAR and EAR. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA training. Additionally, the contract requires compliance with configuration change management and specific documentation for source approval requests.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
FERRULE, EXCITER-REC
Solicitation # SPE4A7-26-R-XB05
Solicitation SPE4A7-26-R-XB05 is a total small business set-aside for an Indefinite Delivery Contract (IDC) to procure the Ferrule, Exciter-Rec (NSN 2995-01-087-4164). The contract features a five-year base period with firm-fixed-price terms, an estimated annual demand of 280 units, and a guaranteed minimum of 70 units, with a total value not to exceed 350,000 dollars. Delivery is required within 115 days after receipt of order on an FOB Destination basis. Award will be based on a comparative assessment of price and non-price factors, with significant weight placed on past performance and SPRS assessments. The procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to maintain an approved US/Canada Joint Certification Program certification. Technical requirements include adherence to MIL-STD-1916 or ASQ H1331 for sampling, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Additionally, contractors must comply with CMMC Level 2 self-assessment requirements via the SPRS and utilize the Wide Area WorkFlow system for all invoicing and payment requests. Inspection and acceptance are conducted at source.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A7-26-R-XB08
This solicitation is for the procurement of one plain hexagon nut, identified as NSN 5310-00-282-5658, with a delivery requirement of 77 days after receipt of order. The contract is issued by the Department of Defense ASC Supplier Oper AE and AF Div and is classified as a commercial item. It mandates strict adherence to DLA packaging requirements and technical quality standards, including specific protocols for the removal of government identification from non-accepted supplies and physical item marking. Quality assurance is governed by sampling methods according to MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned for critical, major, and minor attributes. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases as defined by NAVSEA. Documentation requirements for source approval requests must also be met to ensure compliance with all technical and quality specifications.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
INDICATOR, BYPASS
Solicitation # SPE4A7-26-R-0755
This contract is a firm fixed price solicitation for one bypass indicator, part number TD221MF0DCY5, manufactured by Pall Aeropower Corporation. The item is designated as an Air Force Critical Safety Item and a GE PBL item, requiring strict adherence to specific drawings and quality assurance provisions. Because the technical data package is proprietary and not provided by the government, only vendors with existing access to the data or traceability to approved sources are eligible to quote. The contract mandates high-level quality standards, including SAE AS9100 compliance and CMMC Level 2 certification for third-party assessment organizations. Inspection and acceptance will occur at the origin, with delivery required within 308 days after order. Packaging and marking must comply with MIL-STD-129 and DLA procurement requirements, and any requests for waivers or deviations must be approved by the DSC contracting officer.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A7-26-R-XB07
This contract solicitation, identified as SPE4A7-26-R-XB07, is issued by the Department of Defense DLA Aviation for the procurement of machine screws under NSN 5305-01-127-7577. The item is classified as a critical application commercial item with a specific part number CA21170-3-11 from Howmet Global Fastening Systems Inc. The procurement is structured as a firm fixed price agreement with a delivery requirement of 35 days after order. The solicitation seeks an indefinite delivery contract with a five year base period and a total value not to exceed 350,000 dollars, with specific delivery order quantities ranging from a minimum of 20 to a maximum of 80. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with inspection and acceptance occurring at the origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The item has no shelf life requirement, and item unique identification is not required by the service customer. Shipping is designated as FOB destination, and palletization must follow DLA packaging requirements for procurement.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS