Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOOT, DUST AND MOIST

Active
SPE4A5-26-T-319AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three units of BOOT, DUST AND MOIST with NSN 5340016807502 and part number 209-001-146-101, under solicitation SPE4A5-26-T-319A, with delivery required within 657 days from the contract date and a firm delivery deadline of May 29, 2028. Items must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must comply with DLA’s standardized requirements, including MIL-STD-129 for marking and labeling, and adherence to RP001 for palletization, overriding any commercial standards like ASTM D3951. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging is acceptable only if it meets DLA’s superior technical and quality requirements referenced from the DLA Master List. Unit of issue is each (EA), and no Item Unique Identification is required as per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, with attribute classifications mandating strict verification levels. Configuration changes require formal engineering change proposals or variance requests, and all government identification must be removed from non-accepted supplies. Delivery is directed to the DLA Distribution facility in New Cumberland, PA, with transportation governed by DLAD proc notes C19 and C20.

General Info

Procure three BOOT DUST MOIST units, FOB origin, deliver by May 29, 2028, per DLA packaging and inspection standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-319A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Kay Bates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOOT,DUST AND MOIST
BOOT,DUST AND MOIST
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BELL TEXTRON INC 97499 P/N 209-001-146-101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A5-26-T-319A
SECTION B
PR: 7017696653 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696653 0001 EA 3.000
NSN/MATERIAL:5340016807502
DELIVERY (IN DAYS):0657
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/29/2028 Original Required Delivery Date:05/29/2028
SPE4A5-26-T-319A
SECTION B
PR: 7017696653 PRLI: 0001 CONT’D
SPE4A5-26-T-319A NSN/Part Number: 5340-01-680-7502 Quantity: 3 EA Purchase Request: 7017696653QTY: 3 Delivery: 657 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
LATCH SET, RIM
Solicitation # SPE7L1-26-T-902K
The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L5-26-T-4732
The contract pertains to the procurement of one bracket, angle item with NSN 5340016060220 and purchase request number 7016785760, totaling four units across two line items—one unit and three units respectively—with a firm fixed price of $3.00 total and no quantity variance permitted. Delivery is required within 88 days from the contract award, with FOB origin terms, inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, while hazardous materials require compliance with TQ requirement IP025. All items must be palletized per RP001 guidelines and packed with a quantity per unit pack of one. Two delivery addresses are specified: one for New Cumberland, Pennsylvania, and one for Barstow, California, with corresponding parcel post and freight shipping instructions. The required ship date is November 10, 2026, with the original delivery deadline set for January 25, 2027. Transportation directives reference DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L5-26-T-4732, categorized under NAICS code 332510, managed by the Department of Defense’s Land Supplier Operations Engines, with primary contact Bradley Evans.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-904Q
The contract pertains to the procurement of 15 units of a threaded standoff, part number 1002346-1 with NSN 5340-01-369-9617, supplied by Simmonds Precision Products Inc located in Vergennes, VT, with CAGE code 89305. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must be delivered within five days after delivery order issuance, and the solicitation is issued under SPE7L1-26-T-904Q with a response deadline of August 13, 2026. The North American Industry Classification System code is 332510, and the contracting activity falls under the Department of Defense’s Land Supply Chain. The primary point of contact is Michael Nordahl, reachable via email and phone listed, and all supplies must comply with the requirement to remove government identification from non-accepted items. The solicitation is accessible through the DIBBS system and targets federal procurement under streamlined acquisition protocols.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7L1-26-T-903Z
This contract is for the procurement of one protective dust cap, identified by NSN 5340-01-696-9253 and part number 77C964400G2-FIND NO-8, under solicitation SPE7L1-26-T-903Z. The requirement is for a single unit to be delivered within 20 days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. Packaging must fully comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container codes, and palletization must adhere to DLA packaging requirements. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specification. Marking is unrestricted, with no special codes required, and shipping must be conducted via traceable means—parcel post is prohibited. The delivery address is the Navy Supply Logistics Center in Mechanicsburg, Pennsylvania, with contact information and government tracking codes provided for logistics and accountability. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition scale. The solicitation was posted August 2, 2026, with responses due by August 13, 2026, under a Federal NAICS code for manufacturing protective equipment.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-904Z
The contract pertains to the procurement of one mounting plate identified by NSN 5340-01-716-2294 and part number 22-02993-00, with a delivery requirement of five days after award. The item must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is subject to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Packaging must adhere to DLA-specific guidelines including MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging requirements. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly permitted by specifications. The shipment is FOB origin, inspected and accepted at destination, with a zero variance tolerance on quantity. The delivery destination is Schofield Barracks, Hawaii, and the transportation and routing are governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE7L1-26-T-904Z, with a required delivery date of July 24, 2026, and was posted on August 2, 2026, with responses due by August 13, 2026. The procurement falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
DUMMY, GLADHAND
Solicitation # SPE7L1-26-T-904X
The contract pertains to the procurement of six units of NSN 5340-01-655-2270 under solicitation SPE7L1-26-T-904X, with a delivery requirement of 144 days ADO. The procurement is governed by DLA Packaging Requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. The contract is classified under NAICS code 332510 and is administered by the Department of Defense through the Land Supply Chain organization, with performance location set in New Cumberland, Pennsylvania, zip 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the primary point of contact is Geoffrey Feicht, reachable via email and phone provided. Government identification must be removed from any non-accepted supplies in accordance with requirement RQ011.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-T-5950
This contract specifies the procurement of a bracket, angle with NSN 5340-01-447-0485 and part number 12365165, requiring four units to be delivered within 209 days under solicitation SPE7L4-26-T-5950. Delivery is FOB origin with zero variance allowance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA requirements RP001 and MIL-STD-129 labeling, with hazardous materials following TQ requirement IP025 per Fed-Std-313 and non-hazardous materials packaged per ASTM D3951 only if not superseded by DLA standards. Palletization must conform to DLA packaging standards, and the unit of issue is each. Delivery is to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston AL 36201-4199, with a required ship date of March 11, 2027. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office with Anna-Rachelle Betts as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
THERMAL COMPOUND
Solicitation # SPE7L1-26-T-906C
The contract is for the procurement of 5-ounce units of thermal compound under NSN 5340-01-699-0395 with a total quantity of four units to be delivered within five days of award. The solicitation number is SPE7L1-26-T-906C, issued by the Department of Defense’s Land Supply Chain through DLA, with a response deadline of August 13, 2026, and a posting date of August 2, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The use of Class I ozone-depleting chemicals is strictly prohibited, and any替代 chemicals require prior approval unless explicitly permitted by the specification. The contract includes RD002, indicating covered defense information applies, and requires the offeror to complete a Cybersecurity Maturity Model Certification Level 2 Self-Assessment. The place of performance is Virginia Beach, Virginia, and the primary point of contact is Isabelle Szulewska, reachable via email and phone provided. No alternate part data is currently available, and the offeror must submit a complete data package including both approved and alternate part information.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LATCH ASSY, RADOME
Solicitation # SPE7L1-26-T-904K
The contract pertains to the procurement of 37 units of a LATCH ASSY, RADOME with NSN 5340-01-047-2407 under solicitation SPE7L1-26-T-904K, which was posted on August 2, 2026, and requires responses by August 13, 2026. Delivery is expected within 113 days after award, with performance taking place at Hill AFB, Utah, 84056-5734. The acquisition falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Export control restrictions apply to associated technical data, subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this data is restricted to DLA contractors with valid US/Canada Joint Certification Program certification, completion of mandated DOD export control training, and prior approval from DLA. DFARS 252.225-7048 governs compliance, and removal of government identification from non-accepted supplies is also required. The point of contact for inquiries is Jason Viadero, reachable via email and phone.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-26-T-11CA
The contract is for a branched wiring harness with NSN/part number 6150-01-144-8900, requiring six units to be delivered within 245 days after order. The item is classified as technical data subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-11CA, posted on August 2, 2026, with responses due by August 10, 2026, under NAICS code 332510. The contracting activity is the ASC Commodities Division of the Department of Defense, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jessica Fuentes-Ossio, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTE
Solicitation # SPE4A6-26-T-11HT
The contract pertains to the procurement of two STUD TURNLOCK FASTENERS with NSN 5325-01-621-4360, under solicitation number SPE4A6-26-T-11HT, issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within five days of award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. Packaging must comply with DLA standards, and all items must be physically marked in accordance with RQ017 requirements. Government identification must be removed from non-accepted supplies as specified under RQ011. The material has no shelf life limitation, and covered defense information provisions may apply. The place of performance is Cherry Point, North Carolina, 28533-0021, with Debra Fowler designated as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 333414
New
DIBBS
GRILLE, METAL
Solicitation # SPE4A5-26-T-319C
The contract pertains to the procurement of a metal grille identified by part number 439W3234-11D and NSN 1660017143102, with a quantity of two units to be delivered within 347 days. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item is classified as a critical application item for The Boeing Company. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as MIL-STD-1916 and ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific marking and airworthiness requirements are mandatory, and the item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. The contractor is required to retain supply chain documentation and adhere to FAA bare item marking rules, though unit identification is not required. Packaging must meet RP001 and RP003 standards, and palletization must follow DLA guidelines. The item is non-unique and not subject to DoD unique item identification. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the original required delivery date is July 24, 2027. Price per unit is set at $2.00, totaling $4.00 with no variance allowed in quantity.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE4A5-26-T-318B
The contract is for a single electrical plug connector, identified by part number BACC63BP12H3SN and NSN 5935-01-607-4886, with a unit of issue of Each (EA), effective February 1, 2026. The requirement stems from a solicitation issued by the Department of Defense under reference SPE4A5-26-T-318B and is managed by the ASC Supplier Operations OEM Division. Delivery is due within 20 days of contract award, with FOB Origin terms and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking applied. Unit packaging is configured for bulk shipping in a single container with no cushioning or dunnage, and palletization must adhere to DLA-specific packaging guidelines. The item is to be shipped via traceable freight, explicitly excluding parcel post, to the naval air station in Oak Harbor, Washington. Quality assurance requires strict adherence to MIL-STD-1916 or equivalent zero-defect sampling plans, with specified verification levels for critical, major, and minor attributes. Manufacturers must be certified under ISO 9001:2015 and comply with DLA’s technical and quality requirements referenced via R-numbers in the DLA Master List. Government identification must be removed from non-accepted supplies, and measuring and test equipment used in production must be calibrated per RT001. Item Unique Identification is not required per the Service customer’s request. The purchase request number is 7017607376, with a total price of $1.00 for one unit and an original required delivery date of July 22, 2026.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A5-26-T-318F
The contract pertains to the procurement of 166 units of a washer, key, identified by NSN 5310013632832 and part number 4903T22P01, sourced under Solicitation SPE4A5-26-T-318F. Delivery is required within 20 days from contract award, with FOB origin terms and no tolerance for quantity variance — exactly 166 units must be delivered. Inspection and acceptance are both to occur at the origin, with packaging required to comply with MIL-STD-2073-1E and marking aligned with MIL-STD-129, including no special marking code. The product is classified as a critical application item, subject to stringent quality controls outlined in DLA’s master technical and quality requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified. Configuration changes must follow formal engineering change procedures, and non-accepted supplies must have government identification removed per contract stipulations. The item is to be delivered to the Turkish military facility in Eskisehir, with freight handled by A.J. Worldwide Services, and the consignee is the 1st Air Maintenance Factory Directorate. Packaging must meet DLA’s packaging requirements, including unit containment as BD, intermediate container E5, and packing level B. The contract is under the Department of Defense, managed by the ASC Supplier Oper OEM Division, with Steven Lewis listed as the primary point of contact. The solicitation was posted in August 2026 with a response deadline the same month, and the original required delivery date is January 22, 2026. All materials must adhere to the DoD’s authorized unit of issue and relevant ANSI X12 standards, with full technical and quality provisions referenced through DLA’s official master list of technical and quality requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336330
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE4A5-26-T-318Y
The contract pertains to the procurement of three vehicular hub and wheel units with NSN 2530-01-686-5163 and part number 70250-12701-102 under solicitation SPE4A5-26-T-318Y. The delivery is required within 588 days from the contract date with a firm delivery deadline of March 21, 2028, and the items must be shipped FOB origin. The quantity is strictly fixed at three units with zero variance allowed. Inspection and acceptance occur at the destination warehouse located at Tracy, California. All packaging must adhere to DLA’s Master List of Technical and Quality Requirements, with specific directives for hazardous and nonhazardous materials: hazardous items must conform to FED-STD-313 and TQ requirement IP025, while nonhazardous items must follow ASTM D3951 unless superseded by higher-priority DLA standards. Packaging and labeling must comply with MIL-STD-129 and palletization must meet RP001 DLA packaging requirements. The Unit of Issue is each unit, with a contract price of $3.00 per unit, totaling $9.00. The shipping address and parcel post address are identical, directing delivery to DLA District San Joaquin, Rec Whse 57, Tracy, CA. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The contract was issued under a federal acquisition framework, categorized under NAICS code 336330, with primary point of contact Stephanie Hewlett from the Department of Defense’s ASC Supplier Oper OEM Division.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325110
New
DIBBS
CLEANING COMPOUND, SOLV
Solicitation # SPE4A5-26-T-318G
The contract is for the procurement of a commercial off-the-shelf cleaning compound, solvent, identified by NSN 6850-01-682-3375 and part number 801-1500-157, supplied by Highland Engineering, Inc., with a CAGE code of 0AK83. The unit of issue is a container (CO), with each container holding 2.0 gallons, and the total quantity ordered is three containers. Delivery is required FOB destination within 202 days, with a required ship date of March 1, 2027, and no variance in quantity is permitted. Inspection and acceptance occur at the destination, with packaging strictly governed by MIL-STD-2073-1E and marking required in accordance with MIL-STD-129, including the special marking code ZZ for additional requirements. Palletization must comply with DLA packaging standards, and the material has no shelf life restriction. The product is classified as a hazardous material, mandating full compliance with OSHA's revised Hazard Communication Standard and the Globally Harmonized System of Classification and Labeling of Chemicals. Suppliers must submit GHS-compliant Safety Data Sheets (SDS) and approved product labels for review and approval by technical personnel prior to contract award, and copies must be filed with DLA Aviation HMIRS. Employee training on SDS, labeling, and 29 CFR 1910.1200 requirements is mandatory. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero tolerance for non-conformances unless otherwise specified. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, and all transportation must adhere to DLAD Proc Note C19 for general shipping and C20 for first destination routing.
Petrochemical Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SING
Solicitation # SPE4A5-26-T-318U
The contract is for the procurement of two units of a chain assembly, singular, identified by NSN 4010-01-630-3113 and part number 00933-1, manufactured by Tru-Hitch, Inc. The total quantity is two units, priced at $2.00 per unit, with delivery required within 121 days from the contract date, FOB origin. All items must be configured to a precise dimension of 7 x 7 x 7 inches and packaged in accordance with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packaging codes. Marking must strictly follow MIL-STD-129 with no special marking required. Palletization and packaging must comply with DLA’s official packaging requirements. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with both inspection and acceptance occurring at the destination. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise stated, and attribute classifications must align with predefined verification levels or AQLs. Technical and quality requirements referenced through R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, and compliance is mandatory. The solicitation number is SPE4A5-26-T-318U, issued August 2, 2026, with a response deadline of August 10, 2026, under a federal acquisition framework with NAICS code 332618. The primary point of contact is Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-318Z
This contract, issued under solicitation SPE4A5-26-T-318Z, procures 15 units of a motional transducer pickup with NSN 6695-00-972-3242 from CEC VIBRATION PRODUCTS, LLC, part number 4-103-0001. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with adherence to MIL-STD-1916 or ASQ H1331 for sampling unless otherwise stated, and zero non-conformances are required in sampled lots unless specified otherwise. Configuration changes require formal engineering change proposals, and deviations or waivers must be formally requested. The item is classified as a critical application product and must be physically identified per RQ017 standards. The product must comply with MIL-STD-2073-1E packaging specifications, including packing code Q, packaging level B, and marking per MIL-STD-129 with no special marking code. Palletization follows DLA packaging requirements, and delivery is FOB origin within 20 days of contract award, with no tolerance for quantity variance. The delivery destination is the Parts-Attach General Depot in Tainan City, Taiwan, with the required delivery date set for August 4, 2026. The contract is a total small business set-aside under NAICS code 334513, and all performance and compliance obligations are subject to verification at origin. Government use codes and administrative data are appended for internal tracking and logistics coordination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, CONNECTING
Solicitation # SPE4A5-26-T-319H
This contract pertains to the procurement of one unit of a connecting chain, identified by NSN 4010-01-590-4131 and purchase request 7017659279, under solicitation SPE4A5-26-T-319H. Delivery is required within 20 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization follows DLA standards, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The delivery address is COMNAVAIRLANT SWWP EQOL HAB in Norfolk, Virginia, with specific container and handling instructions including E5 unit containers and dry preservative methods. The contract mandates zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, with attribute classifications assigned specific verification levels and AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The item is to be delivered to the government with no variance permitted in quantity, and the original required delivery date is July 27, 2026.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTROL STICK, AIRCR
Solicitation # SPE4A5-26-T-317Z
The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-319P
The contract is for the procurement of three self-indicating bimetallic thermometers under NSN 6685-01-417-6054, sourced from Moeller Instrument Company, Inc. with part number ITD32404-S, delivered FOB origin with a strict 170-day delivery window ending February 28, 2027. The item is designated as a critical application item and must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating it as a delicate instrument. No quantity variance is permitted, and inspection and acceptance occur at the destination, with packaging required to meet DLA’s procurement guidelines and prohibit any mercury-containing substances in preservation, packaging, or marking. Sampling and quality verification follow zero-defect standards under MIL-STD-1916 or comparable plans, with critical attributes held to an AQL of 0.1 and mandatory verification at Level VII. Mercury and mercury compounds are strictly banned unless used in functional exemptions such as batteries or sensors, and any such exempt items must include secondary containment per NAVSEA 5100-003D. The contract references DLA’s master list of technical and quality requirements and mandates compliance with all incorporated technical and quality provisions identified by R or I numbers. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, under freight transport protocols outlined in DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details