Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOW, VEHICULAR TOP

Active
SPE7L4-26-T-5955Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a vehicular top bow, identified by NSN 2540-01-698-0505, under solicitation SPE7L4-26-T-5955, with a response deadline of August 13, 2026, and a required delivery within 69 days of award. The item is subject to comprehensive technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. Packaging must comply with DLA specifications, and any configuration changes require formal engineering change proposal approval. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, regardless of location. Access to this controlled data is restricted to contractors holding an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD training and questionnaire requirements and have received explicit authorization from DLA. The place of performance is in Tracy, California, with the contracting office under the Department of Defense’s Combat Vehicles and Armament division, and primary contact is Anna-Rachelle Betts.

General Info

Procurement of one vehicular top bow, NSN 2540-01-698-0505, delivery in 69 days, ITAR/EAR controlled, US/Canada certification required.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-T-5955 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOW,VEHICULAR TOP
BOW,VEHICULAR TOP
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2540-01-698-0505 Quantity: 1 EA Purchase Request: 7017696475QTY: 1 Delivery: 69 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336360
New
DIBBS
COVER, FITTED, VEHICU
Solicitation # SPE7L4-26-U-1049
The contract solicitation SPE7L4-26-U-1049 is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency under the Department of Defense’s LSO Combat Vehicles and Armament office for the procurement of fitted vehicle covers with NSN 2540-01-507-7822. The contract has a maximum ceiling value of $350,000 and authorizes an estimated initial quantity of 17 units, with delivery required within 80 days from order placement under FOB Origin terms. All deliveries are restricted to the Continental United States and subject to destination inspection and acceptance by the government. Packaging and labeling must fully comply with MIL-STD-129 for identification, barcoding, and shipment documentation, superseding ASTM D3951 where applicable. Palletization follows RP001, DLA’s Packaging Requirements for Procurement. Hazardous materials must be packaged according to TQ Requirement IP025 and FED-STD-313, and labeled under OSHA’s Hazard Communication Standard (29 CFR 1910.1200), while non-hazardous items may use commercial packaging only if it meets ASTM D3951 without conflicting with the DLA Master List of Technical and Quality Requirements. The contract mandates electronic invoicing through Wide Area WorkFlow and requires full compliance with safeguarding requirements for covered defense information under DFARS 252.204-7012 and NIST SP 800-171 controls. All ocean shipments must use U.S.-flag vessels unless a formal waiver is obtained at least 45 days prior to sailing, with detailed reporting required to MARAD. The solicitation includes mandatory clauses on small business representation, equal opportunity, combating trafficking, employment eligibility verification, and prohibition of covered defense telecommunications equipment. Offerors must provide their Unique Entity ID and CAGE code and affirm compliance with socioeconomic and cybersecurity obligations. The contract is part of a simplified acquisition process, submitted via DIBBS by the August 17, 2026 deadline, and no options or extension clauses are provided beyond the one-year ordering period.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7L1-26-U-0539
The contract pertains to the procurement of 36 vehicular seats identified by NSN 2540-01-576-9579 and part number BOS 2339131-544 under solicitation SPE7L1-26-U-0539, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 80 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. If the item is classified as hazardous under FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001 DLA Packaging Requirements, and the unit of issue is each (EA) with a quantity per unit pack of one. The contract is a total small business set-aside under NAICS code 336360 and remains open for response until August 17, 2026, with a posted date of August 2, 2026. The primary point of contact is Dov Sneward at DLA’s Land Post Award office.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
INSULATION, VEHICULAR
Solicitation # SPE7L1-26-T-906E
The contract is for one unit of vehicular insulation with NSN 2540-01-592-5230, procured under solicitation SPE7L1-26-T-906E, issued by the Department of Defense’s Land Supply Chain. The item, supplied by Cummins Power Generation Inc. under part number 405-9549, must be delivered within ten days to Fort Riley, Kansas, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the material is non-hazardous under Fed-Std-313, it must be commercially packaged per ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging must be marked and labeled in accordance with MIL-STD-129, and palletization must adhere to RP001 DLA Packaging Requirements. The delivery is addressed to U.S. Army unit W81WRD, with the required delivery date set for August 4, 2026. Transportation and shipment details are governed by DLAD Procurement Notes C19 and C20, and the unit of issue is each. For government use, the item is coded with DIC A01, distribution V, and advance notice FC Z9.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BRACKET, TOW HOOK
Solicitation # SPE7L4-26-T-5952
The contract pertains to the procurement of one Bracket, Tow Hook with NSN 2540-01-699-9375 and purchase request number 7017696424, under solicitation SPE7L4-26-T-5952. The item must adhere to strict technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The part must be manufactured and packaged in accordance with TDP Revision A Gen 1 based on reference drawings 19207 12644209 and 19207 12644210, with the most recent revision dated June 30, 2024. Packaging must meet MIL-STD-2073-1E specifications, including preservation method 10, packaging material code 00, wrap material FA, and unit container D3, with marking required to comply with MIL-STD-129 and no special marking codes applied. Palletization must follow DLA Packaging Requirements for Procurement, and the item is to be delivered FOB origin to the specified receive warehouse in Tracy, California. Inspection and acceptance occur at destination with zero variance allowed in quantity. The required delivery date is March 4, 2027, with a lead time of 202 days. The contract is administered by the Department of Defense, LSO Combat Vehicles and Armament, with primary point of contact Anna-Rachelle Betts.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE7L7-26-T-4528
This contract pertains to the procurement of a single vehicle hub and wheel assembly identified by NSN 2530-01-666-7753 and part number 3992AS350-3, with a requirement for delivery of one unit within five days of contract award. The item is classified as a critical application item with a Type I shelf life of 60 months, which is non-extendable, and must be marked accordingly per special marking code 32. Strict packaging standards mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including specific preservation methods, unit and intermediate container codes, and palletization in compliance with DLA packaging requirements. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, with delivery FOB origin to the designated government facility at Naval Air Station Whidbey Island, Oak Harbor, WA. Zero tolerance for non-conformances is required during inspection, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, and all attributes must be verified at specified quality levels. The item must be free of intentional mercury or mercury compounds unless used in approved functional components like batteries or instruments, and any mercury-containing portable devices must include secondary containment as per NAVSEA guidance. Contract performance is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions for inspection, acceptance, and hazardous material handling are binding under applicable military and federal standards.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
EQUIPMENT KIT, VEHIC
Solicitation # SPE7L4-26-T-5947
The contract solicitation SPE7L4-26-T-5947 seeks the procurement of 10 Equipment Kits, VEHIC with NSN 2540-01-707-7193 under a Total Small Business Set-Aside, with a response deadline of August 13, 2026, and a delivery requirement of 144 days after order. All components must conform to source control drawings and be sourced exclusively from approved suppliers listed on those drawings. The equipment must comply with stringent technical and quality standards referenced from the DLA Master List, including requirements for configuration change management, qualified products and manufacturers lists, and physical marking of bare items. The kit must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. Cybersecurity compliance is mandatory, requiring CMMC Level 2 certification by a certified third-party assessment organization, and the handling of technical data is subject to export controls under ITAR or EAR, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA training and documentation. Inspection and acceptance may occur at the manufacturer’s origin, and vendor item control drawings govern all aspects of design and fabrication. Technical data associated with the kit is export-controlled, and its dissemination to foreign persons—even within the U.S.—is prohibited without explicit authorization. The delivery location is New Cumberland, PA, and primary point of contact is Anna-Rachelle Betts of the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
LADDER, VEHICLE BOARDIN
Solicitation # SPE7L4-26-T-5957
The contract is for the procurement of five vehicle boarding ladders, identified by NSN 2540-01-681-9819 and part number 57K9205, under solicitation SPE7L4-26-T-5957, issued by the Department of Defense through DLA. Delivery is due within 199 days from the contract date with a firm delivery target of March 1, 2027, and items must be shipped FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging requirements. The unit of issue is each, priced at $5 per unit, totaling $25, and all items require no special marking. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The destination for delivery and shipping is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details are governed by DLA Procurement Notes C19 and C20. The contract’s point of contact is Anna-Rachelle Betts, reachable via email and phone, and the solicitation was posted August 2, 2026, with responses due by August 13, 2026.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
COVER, SEAT, VEHICULAR
Solicitation # SPE7L1-26-U-0531
The contract is a solicitation issued by the Defense Logistics Agency’s Land Supply Chain under solicitation number SPE7L1-26-U-0531 for the procurement of 60 vehicular seat covers with NSN 2540-01-578-0812, designated as a Total Small Business Set-Aside under NAICS code 336360. Delivery is required within 80 days of order placement under FOB Origin terms, with inspection and acceptance occurring at the destination point, and the contract functions as an Indefinite Delivery Contract (IDC) with a guaranteed minimum of nine units and a maximum contract value of $350,000.00, though unit pricing has not been established and will be determined at time of order. Packaging must adhere rigorously to DLA Master List of Technical and Quality Requirements, particularly RP001 for palletization and TQ Requirement IP025, with non-hazardous items packaged per ASTM D3951 and hazardous items per FED-STD-313, while all packaging and labeling must comply fully with MIL-STD-129 including mandatory barcoding for logistics tracking, and no deviations from DLA’s technical standards are permitted. The contract mandates compliance with numerous federal and defense regulations including cybersecurity safeguards under FAR 52.204-7012 and NIST SP 800-171, prohibitions on hexavalent chromium and toxic material disposal, and restrictions on acquiring items from Communist Chinese Military Companies or using mandatory arbitration agreements, with full adherence to the Hazard Communication Standard for labeling. Payment must be processed exclusively through Wide Area WorkFlow, and contractors are required to maintain an active Unique Entity ID and certify their small business status under applicable socioeconomic programs, with pre-award submission of hazard labels required if materials fall outside exempted federal statutes. All submissions must be made electronically through the DLA DIBBS portal by the deadline of August 17, 2026, and the contract incorporates multiple FAR and DFARS clauses related to contract administration, data security, ethics, and performance, with no option periods defined and the responsibility for oversight resting with the Government’s designated DoDAACs at the delivery destination.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
HANDLE, SPECIAL
Solicitation # SPE7L4-26-T-5944
The contract pertains to the procurement of one unit of a special handle, identified by NSN 2540-01-679-4922 and part number 936860, under solicitation SPE7L4-26-T-5944. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and must be shipped via the fastest traceable means exclusively—parcel post is prohibited. The item must be packaged in compliance with MIL-STD-2073-1E, with specific packaging methods including preservative treatment type 33, wrapping material FA, cushioning material DA, and unit container D3. All marking must adhere to MIL-STD-129 without special markings, and palletization must conform to DLA packaging requirements. The delivery destination is Fort Bliss, Texas, for the U.S. Army, with shipment tracking reference RDD 555 and project code TP 2. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 under a zero-defect acceptance standard unless otherwise directed. Attributes are to be categorized as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. Inspection and acceptance occur at the destination, and the unit of issue is in each. The contract references DLA’s official guidelines for unit conversions and packaging, and performance is tied to the required delivery date of July 29, 2026. The point of contact is Anna-Rachelle Betts, and the awarding organization is the Department of Defense, under the LSO Combat Vehicles and Armament office, with NAICS code 336360 indicating defense manufacturing sector alignment.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
Commercial Turbocharger Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Vehicular Tire SupplyThe contract entails the supply of five pneumatic vehicular tires designated by NSN 2610013368828, requiring full compliance with military specifications and approved packaging standards to ensure operational readiness and logistical compatibility. The tires are to be delivered to Fort Bragg, North Carolina, following strict procurement protocols governed by the Department of Defense through the Defense Logistics Agency. This subcontract falls under NAICS code 336360, indicating its classification within the automotive parts manufacturing sector, and is positioned as a direct fulfillment task without a formal set-aside designation. The contractual obligation is tied to a specific procurement record identified by the contract number SPE7LX26F86C0, with all units expected to meet rigorous military-grade performance, durability, and safety benchmarks for use in defense-related vehicular operations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336360
New
DIBBS
Pneumatic Tire Supply (NSN 2610015408312)The contract involves the supply of four new pneumatic tires identified by NSN 2610015408312, manufactured to meet military specifications for use at Al Udeid Air Base in Qatar. These tires are intended for military vehicle applications and must comply with stringent performance and durability standards required by the Department of Defense. The contract is structured as a subcontract under the broader procurement efforts of the Defense Logistics Agency, with the North American Industry Classification System code 336360 indicating the industry classification for tire manufacturing. The contract was posted on August 1, 2026, and is associated with the award identifier SPE7LX26F86B1 and contract number SPE7LX19D0029, reflecting its integration into an existing defense logistics framework. Delivery is targeted specifically to the operational hub at Al Udeid Air Base, emphasizing the strategic importance of maintaining tire readiness for military operations in the region.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 333613
New
DIBBS
GEAR CLUSTER
Solicitation # SPE7L4-26-T-5949
The contract pertains to the procurement of five gear clusters, specifically spur gears identified by NSN 3020-01-228-7613, under solicitation SPE7L4-26-T-5949, with a response deadline of August 13, 2026, and a delivery requirement of 119 days after award. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Cybersecurity compliance mandates that any third-party assessment organization involved must be CMMC Level 2 certified. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, regardless of location, and necessitating adherence to DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export-controlled data training, and approval through the DLA Export-Controlled Technical Data Questionnaire. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament organization, with performance located in New Cumberland, Pennsylvania, and primary point of contact Anna-Rachelle Betts via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7L4-26-T-5953
The contract pertains to the procurement of one unit of preformed hose identified by NSN 4720-01-170-5006 and part number 10511782, with a total quantity of 13 units to be delivered under solicitation SPE7L4-26-T-5953. The item is classified as a critical application component and must comply strictly with DLA packaging requirements as outlined in RP001, superseding any other standards such as ASTM D3951. All packaging and labeling shall adhere to MIL-STD-129, with the unit of issue and quantity per unit pack defined by the contract. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occurring at the destination facility located at Tracy, California. The required delivery date is 158 days after award, with an original due date of March 25, 2027, and a needed ship date of January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition type. Transportation instructions are governed by DLA procedural notes C19 and C20. The contract specifies a fixed unit price of $13.00 per unit, totaling $169.00, and the point of contact is Anna-Rachelle Betts, reachable via DLA email and phone.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-T-5950
This contract specifies the procurement of a bracket, angle with NSN 5340-01-447-0485 and part number 12365165, requiring four units to be delivered within 209 days under solicitation SPE7L4-26-T-5950. Delivery is FOB origin with zero variance allowance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA requirements RP001 and MIL-STD-129 labeling, with hazardous materials following TQ requirement IP025 per Fed-Std-313 and non-hazardous materials packaged per ASTM D3951 only if not superseded by DLA standards. Palletization must conform to DLA packaging standards, and the unit of issue is each. Delivery is to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston AL 36201-4199, with a required ship date of March 11, 2027. The contract is managed by the Department of Defense’s LSO Combat Vehicles and Armament office with Anna-Rachelle Betts as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-5951
The contract specifies the procurement of 12 units of an air dryer and cooler system for pipeline applications under NSN 0001S00000053, with a delivery deadline 279 days after contract award. All components must conform to source-controlled drawings and originate from approved sources listed on those drawings. The product must comply with stringent technical and quality requirements outlined in the DLA Master List, including tailored higher-level quality standards, configuration change management procedures, and qualified manufacturers or products lists where applicable. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Sampling and verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Fat testing is required per two specified drawings, with two samples to be tested and 20 days’ notice provided to the government before testing begins. The contract mandates compliance with DLA packaging standards, measuring and test equipment requirements, and enforcement of quality assurance provisions. The purchasing agency is the Department of Defense under LSO Combat Vehicles and Armament, with performance to be delivered to Tracy, CA, 95304-5000. The solicitation, issued under SPE7L4-26-T-5951, closed for responses on August 13, 2026, with the contractor required to meet all technical, quality, and administrative conditions outlined in the document without deviation unless formally approved. The primary point of contact is Anna-Rachelle Betts at DLA, with all correspondence and inquiries directed through the provided email and phone number.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-5958
This contract specifies the procurement of one unit of a box and accessories stowage item with NSN 2540-01-578-5169, under solicitation SPE7L4-26-T-5958, with a required delivery within ten days of contract award and delivery terms set at FOB origin. The item must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any conflicting specification requirements, including the prohibition of Class I ozone-depleting chemicals and the requirement for approved substitutes. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, and to DLA Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must conform to specified standards, and the unit must be physically identified in accordance with MIL-STD-130. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring strict compliance with procurement note H02. The delivery destination is US Army SSA Powidz AB, Poland, and the point of inspection and acceptance is at destination. The contract mandates a Certificate of Conformance unless explicitly withheld by a Quality Assurance Letter of Instruction, and all documentation must align with the exact revision levels of referenced technical data packages and drawings issued up through 2026. No quantity variance is permitted.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L4-26-U-1048
The contract pertains to the procurement of a Vehicular Bracket, Part Number 22-62169-201, identified by NSN 2590015763581, with a quantity of 14 units to be delivered within 85 days under the solicitation SPE7L4-26-U-1048. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but is superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence; all packaging and labeling must adhere to MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative chemicals require prior approval unless explicitly authorized by specification. The unit of issue is each, with a unit price of $14.00, resulting in a total price of $196.00. The contract is issued by the Department of Defense, Office of the LSO Combat Vehicles and Armament, and is subject to the DLA Direct, CONUS coverage. Compliance with all technical and quality standards referenced in the DLA Master List, as defined by the solicitation or award date, is mandatory. The designated point of contact is Karryn Hoston, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, HAND BRAK
Solicitation # SPE7L4-26-U-1046
This contract pertains to a parts kit for a hand brake, identified by the NSN 2530-01-652-7219 and part number 12449370, with a quantity of 19 units to be delivered under solicitation SPE7L4-26-U-1046. The delivery is required within 75 days after award, with delivery terms set at FOB origin, and no variance in quantity is permitted—precisely 19 units must be supplied. All items must comply with stringent technical and quality specifications referenced from the DLA Master List, including tailored higher-level quality requirements and packaging standards aligned with MIL-STD-2073-1E, Appendix D, for kits. Packaging and marking must adhere to MIL-STD-129 and DLA’s procurement packaging requirements, with no ozone-depleting chemicals allowed under any circumstances; substitutions require prior approval unless explicitly authorized. Inspection and acceptance occur at the origin, and all items must be packaged with preservation methods designated as ZZ, with unit packaging marked appropriately under packing code U. The contract is set aside entirely for small businesses and is managed by the Department of Defense’s Combat Vehicles and Armament division, with Heather Kessler listed as the primary point of contact.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326299
New
DIBBS
FLOAT, BALLOON
Solicitation # SPE7L4-26-T-5948
The contract pertains to the procurement of 50 units of FLOAT, BALLOON under solicitation SPE7L4-26-T-5948, with a response deadline of August 13, 2026, and delivery required within 84 days after award. The item is classified under NAICS code 326299 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament organization, with performance located in San Diego, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning unauthorized disclosure—包括 to foreign nationals within the U.S.—is prohibited without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completion of required DLA export control training, and formal approval from DLA may access the controlled data. The point of contact for inquiries is Kristen Elliott, reachable via email and phone listed in the contract details.
All Other Rubber Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5956
The contract specifies the procurement of 37 LEVER, BREECHBLOCK, COCKING components identified by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5956, with a delivery deadline of 178 days after award. The item is classified as a defense article subject to the International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls. Failure to provide proof of DDTC registration will render any offer ineligible for award. Technical data associated with the item is export-controlled under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization. The procurement is subject to strict packaging standards, prohibition of ozone-depleting chemicals, and cybersecurity requirements mandating CMMC Level 2 certification. Government identification must be removed from non-accepted supplies, and demilitarization procedures apply as the item falls under Category I munitions. The contract is managed by the Department of Defense's Combat Vehicles and Armament office, with performance directed to Cherry Point, North Carolina, and primary contact information provided for inquiries.
Other Support Activities for Air Transportation

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details