BRACKET, DOUBLE ANGLE

The contract solicitation SPE7L1-26-T-868C calls for the procurement of 20 units of a Double Angle Bracket, identified by NSN 5340-01-478-8494, with delivery required within 50 days after award to DLA Distribution Red River in Texarkana, Texas. The item is defined by Army drawings and must comply with DCSC Drawing 16236 CS-2300-0001 for Chemical Agent Resistant Coating (CARC), which supersedes any paint finishing requirements in the original drawings; no phosphate coating is required. The bracket must be manufactured using components listed on approved Qualified Products Lists or Qualified Manufacturers Lists as specified in Procurement Note H02, and the use of Class I Ozone Depleting Chemicals is strictly prohibited. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization conforming to DLA’s RP001 requirements, and non-hazardous items must follow ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements. Hazardous materials must be packaged per TQ Requirement IP025 and labeled according to 29 CFR 1910.1200. Inspection and acceptance occur at origin, with sampling following MIL-STD-1916 or ASQ H1331 Table 1, where critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Identification of military property must comply with MIL-STD-130N, and Certificate of Conformance procedures are authorized unless waived by a Quality Assurance Letter of Instruction. The contractor must comply with all applicable DFARS and FAR clauses including cybersecurity requirements under 252.204-7012, restrictions on trafficking and employment eligibility, and prohibition of hexavalent chromium. Invoicing must be submitted electronically via Wide Area WorkFlow, and FOB Origin terms apply. The solicitation was posted August 3, 2026, with a response deadline of August 6, 2026, and is subject to full and open competition with no set-aside restrictions.