This Solicitation opportunity from Department Of Defense was posted on May 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BRACKET, MOUNTING

Closed

SPE7LX-26-U-7635Federal

Submission Closed06/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

PIN, QUICK RELEASEThe contract involves the procurement of five units of a quick release pin identified by the National Stock Number 5315-00-883-2968. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract type is a solicitation, and there is no specified set-aside or NAICS code associated with it. The contract details indicate a federal organization as the issuer, but specific location information for both the office address and place of performance is not provided. While there is no contact information listed, further details and access to the solicitation can be obtained through the Defense Logistics Agency’s bidding platform. This contract seeks to fulfill a straightforward acquisition for the Department of Defense’s supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

NUTThe contract pertains to the procurement of 14 units of a item identified as "NUT" with NSN/Part Number 5310-01-248-1076. The solicitation, numbered SPE4A6-26-T-92S3, was posted by the Defense Logistics Agency under the Department of Defense on June 15, 2026. Interested parties were required to respond by June 23, 2026. This procurement is categorized as a solicitation and does not specify any set-aside type or NAICS code. The contract is managed by a federal organization, with performance details and specific office location information not disclosed. The solicitation can be accessed through the Defense Logistics Agency's bid board system.

Defense Logistics Agency

POSTED

DEADLINE

CHAIN, WELDLESSThe contract involves the procurement of 370 units of weldless chains identified by NSN/Part Number 4010-00-042-7913. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE4A5-26-T-239P. The solicitation was posted on June 15, 2026, and the deadline for response is June 23, 2026. The contract does not specify any set-aside type or particular small business category restrictions and lacks details on the NAICS code. The place of performance and specific office address details were not provided. Interested parties can access additional information and submit their responses through the Defense Logistics Agency’s bidding system website.

Defense Logistics Agency

POSTED

DEADLINE

LEAF, BUTT HINGEThe contract pertains to the procurement of a leaf butt hinge with the National Stock Number 5340-00-192-4090. A total quantity of five units has been requested under purchase request number 7016088362. This solicitation, identified by the number SPE7L1-26-T-706R, was issued by the Defense Logistics Agency, which operates under the Department of Defense. The solicitation was posted on June 15, 2026, and the deadline for responses is June 26, 2026. The contract is categorized as a federal solicitation with no specific set-aside type indicated. The place of performance and detailed office address information are not provided. The solicitation is accessible through the Defense Logistics Agency's procurement platform, ensuring that vendors can review and submit their responses within the specified timeframe. This contract reflects routine acquisition activity to support DoD operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

CLAMP, LOOPThe contract pertains to the procurement of 20 units of a product identified as "CLAMP, LOOP" with the National Stock Number 5340-01-721-0178. The solicitation, numbered SPE7L1-26-T-707D, was posted on June 15, 2026, with a response deadline set for June 26, 2026. This solicitation was issued by the Defense Logistics Agency, a component of the Department of Defense, and is classified as a federal acquisition. While specific details such as set-aside status, NAICS code, and exact performance location are not provided, the contract is intended to support federal government operations. The official solicitation and submission processes are managed through the specified online procurement portal. This contract facilitates the timely acquisition of essential hardware components within established federal procurement guidelines.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract involves the procurement of 32 units of a mounting bracket, specifically part number 300833-7506-0101, with a National Stock Number (NSN) 5340-01-588-2024. The product will be delivered within 256 days to the continental United States (CONUS) with delivery and acceptance occurring at the destination. The packaging requirements adhere to federal and military standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, with special provisions if the material is hazardous following FED-STD-313. Palletization must comply with DLA packaging requirements. Item Unique Identification is not required, but the contract specifies adherence to the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and assigns covered defense information handling protocols. Quality assurance and inspection are significant contract elements, mandating sampling methodologies aligned with MIL-STD-1916 or ASQ H1331 standards, with verification levels and Acceptable Quality Levels (AQLs) clearly defined by attribute criticality. The manufacturer has discretion in selecting attribute or variable inspection methods, provided the sampling plans are compliant. Inspection and acceptance will take place upon receipt at the destination. The contract is issued through the Defense Logistics Agency (DLA) with specific references to unit of issue and quality controls, and customer points of contact including Theodore Misiolek for communications related to the solicitation.

General Info

Procurement of 32 mounting brackets delivered in 256 days, meeting federal packaging and quality standards.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(1)

RFQ SPE7LX-26-U-7635 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 29

Solicitation

Response DeadlineJun 3

Deadline has passed

Submission Closed

06/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Office AddressUS

Contacts

Theodore Misiolek

contact@example.gov

+1 (555) 000-0000

Full Description

BRACKET,MOUNTING
BRACKET,MOUNTING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD002, COVERED DEFENSE INFORMATION APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SIMMONDS PRECISION PRODUCTS INC 89305 P/N 300833-7506-0101
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000227865 0001 EA 32.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5340015882024
DELIVERY (IN DAYS):0256
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7LX-26-U-7635
SECTION B
PR: 1000227865 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-7635 NSN/Part Number: 5340-01-588-2024 Quantity: 32 EA Purchase Request: 1000227865QTY: 32 Delivery: 256 days ADO