Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRACKET, MOUNTING

Active
SPE7L1-26-T-887ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 42 mounting brackets with NSN 5340-01-110-4018 under solicitation SPE7L1-26-T-887Z, with a required delivery within 112 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, and its disclosure to foreign persons, regardless of location, is restricted. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The place of performance is New Cumberland, Pennsylvania, and the point of contact is Michael Nordahl, reachable via email or phone provided. The solicitation opens on July 28, 2026, with responses due by August 10, 2026.

General Info

Procure 42 mounting brackets, deliver within 112 days, comply with DLA standards, ITAR/EAR controls, New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-887Z for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,MOUNTING
BRACKET,MOUNTING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-110-4018 Quantity: 42 EA Purchase Request: 7017048753QTY: 42 Delivery: 112 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
Federal
Shipping & Storage ContainersThe U.S. Department of Defense, through its Office W6QK Acc-DTA based in Warren, Michigan, is seeking qualified small businesses to provide specialized shipping and storage containers under solicitation number PANDTA26P00000031549. This sources-sought notice is designated as a Small Business Set Aside – Total, meaning only small businesses are eligible to respond, and it falls under NAICS code 332439 for other fabricated metal product manufacturing. Responses are due by August 12, 2026, at 5:00 p.m. Eastern Time, with the requirement for performance located in Anniston, Alabama. Primary point of contact is Robin L. Bronson, reachable by phone at 571-588-9033 or email robin.l.bronson.civ@army.mil, with secondary contact Haley Bruns at 520-692-8433 or haley.r.bruns.civ@army.mil. Interested parties should submit proposals through the SAM.gov portal prior to the deadline to be considered for potential contract award.
W6QK Acc- Dta

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332439
New
DIBBS
Military-Grade Packaging and Crating ServicesThe contract requires the provision of military-grade packaging, crating, and preservation services fully compliant with MIL-STD-129 and ASTM D3951 standards to ensure the integrity of military equipment during shipment and long-term storage. The work must include comprehensive corrosion protection measures and secure containerization techniques to safeguard sensitive hardware against environmental damage, physical impact, and degradation over time. All materials and methods must meet exacting defense department specifications for durability, labeling, and handling protocols to support operational readiness and logistics continuity. Performance is centered at Tobyhanna, Pennsylvania with a zip code of 18466-5050, and the opportunity is structured as a subcontract under the NAICS code 332439. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is managed by the Maritime Supply Chain ESOC Buys division under the Department of Defense. Participants must be prepared to deliver fully certified packaging systems that align with federal military logistics requirements, ensuring seamless integration into defense supply chains and adherence to stringent quality and traceability controls.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
Manufacturing and Supply of Modification Kits for Modular Storage SheltersThe contract entails the manufacture and delivery of a Modification Kit for the SH Cover Modular Storage system identified by NSN 8145015120930, requiring full compliance with applicable military technical specifications to ensure operational readiness and interoperability. The kit must be properly packaged, labeled, and palletized in accordance with defense logistics standards to facilitate secure and efficient transport. Delivery is designated for Fort Bliss, TX, although the place of performance is listed as Fort Drum, NY, indicating potential staging or coordination activities at that location. The work falls under NAICS code 332439, classifying it within the manufacturing of other metal container industries, and is structured as a subcontract, suggesting primary contractor oversight. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under the purview of the Department of Defense’s Construction & Equipment Containers agency.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
Jack Caster Frame Supply (NSN 1730-00-308-3870)The contract specifies the supply of two military-spec jack caster frames identified by NSN 1730-00-308-3870, requiring full compliance with MIL-STD-1916 zero-defect inspection standards to ensure absolute quality and reliability for defense applications. Each unit must be physically marked according to established identification requirements to meet traceability and regulatory compliance standards. The solicitation, issued under the NAICS code 332439, is structured as a subcontract and is managed by the Department of Defense through its Construction & Equipment Manu & Con organization. The opportunity was posted on July 28, 2026, with responses due by August 7, 2026, and is accessible via a DIBBS platform link for qualified vendors to submit proposals. There is no set-aside designation, meaning all eligible suppliers may compete, and performance location details are not specified beyond the overarching defense procurement framework.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332439
New
DIBBS
Metallic Tube Manufacturing and SupplyThe contract entails the manufacture and supply of a precision metallic tube meeting military specification NSN 4710-01-654-3969 and part number 3625292, with delivery terms set as FOB origin, meaning the buyer assumes responsibility for transportation and risk once the product leaves the supplier’s facility. Inspection of the delivered items will occur at the destination, ensuring compliance with required standards after transit. The work falls under NAICS code 332439, which pertains to other fabricated metal product manufacturing, and is classified as a subcontract under the Department of Defense’s Fluid Handling Division. Performances are to be delivered to Fort Campbell, with a zip code of 42223-5825. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, providing potential vendors a two-week window to submit proposals through the designated DLA BSM portal.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
Shipping Container Supply (Miscellaneous Metal Containers)The contract covers the supply of a single type of military-spec miscellaneous metal shipping and storage container identified by NSN 8145015113250, with an emphasis on long-term availability and on-demand delivery capabilities to meet operational needs. This is a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Containers office, requiring the contractor to ensure consistent supply and rapid response to demand fluctuations without interruption. The place of performance is designated as Scotia, NY, with a zip code of 12302-9752, indicating the primary logistics and distribution hub for fulfilling requirements. The NAICS code 332439 classifies the work within the category of other fabricated metal product manufacturing, underscoring the specialized nature of the container’s production to meet exacting military specifications. The solicitation was posted on July 28, 2026, with a response deadline set for August 10, 2026, providing potential bidders a narrow window to prepare and submit proposals. No set-aside designation is specified, meaning the contract is open to all eligible subcontractors regardless of business size or status. The absence of a point of contact or detailed office address suggests that all communication and administrative tasks will be handled through the DLA DIBBS portal, where the full solicitation can be accessed via the provided UI link. The contract structure prioritizes sustained logistical readiness over one-time delivery, expecting the contractor to maintain inventory, production capacity, and distribution readiness for an extended period following award.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of a single mounting bracket, identified by NSN 5340-01-464-7761, with a delivery requirement of 10 days after contract award. It is issued under solicitation SPE7L1-26-T-882R by the Department of Defense’s Land Supply Chain, with performance located at Fort Benning, Georgia. The procurement is subject to full and open competition and incorporates stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The contractor must be a CMMC Level 2 certified third-party assessment organization and comply with DLA packaging requirements, including the removal of government identification from non-accepted supplies. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access and disclosure to foreign persons without prior authorization from the Department of State or Commerce; only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may handle the data. Compliance with DFARS 252.225-7048 is mandatory. The solicitation response deadline is August 10, 2026, and all terms are governed by applicable federal acquisition regulations.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
COVER MODULAR STORAThe contract pertains to the procurement of eight units of a modular storage system identified by NSN 8145-01-512-0926 under solicitation SPE8ED-26-T-1187, with a required delivery within 20 days of award and a firm delivery date of July 23, 2026. The items must be furnished FOB origin with no variance in quantity permitted, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 as well as the DLA Master List of Technical and Quality Requirements, which take precedence, and must be labeled per MIL-STD-129. Palletization must follow RP001 packaging standards and the Unit of Issue is EA with a Quantity per Unit Pack of 001. The unit price is $8.00 per unit, totaling $64.00. The delivery location is Fort Bragg, North Carolina, with shipping instructions mandating the use of the fastest traceable means, explicitly excluding parcel post. The item is marked for specific military units and includes government-only identifiers, including a tracking control number and an IPD code. The contract incorporates all applicable technical and quality requirements referenced in the DLA Master List, and any revisions to that list are governed by the solicitation or award date, depending on acquisition size. The purchase request number is 7017639078, and the contractor is required to adhere strictly to all labeling, packaging, and shipping procedures specified to ensure Government compliance.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SHThe contract pertains to the procurement of a Modification Kit, SH with part number 55258 and NSN 8145015120930, classified as a commercial item, supplied by SHARKCAGE INC. from Spring Branch, TX. Two separate line items are specified: one for ten units at $10.00 each under PR 7017643970, and another for ten units at $32.00 each under PR 7017639102, both with identical technical specifications and delivery terms. Delivery is required within ten days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and strictly adhere to MIL-STD-129 labeling and DLA Packaging Requirements for Procurement (RP001), with palletization following mandated guidelines. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Shipment must be executed via the fastest traceable means, excluding parcel post, to two distinct delivery points: Fort Drum, NY for the first line item and Fort Bliss, TX for the second. The contract is issued under solicitation SPE8ED-26-T-1184 with an original required delivery date of July 23–24, 2026, and includes specific markings, tracking numbers, project identifiers, and government-only codes for logistics and accountability.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
MODIFICATION KIT, SHThe contract is for a single unit of a Modification Kit, SH, identified by part number 170516D and NSN 8145014990721, with a total price of $1.00 and a delivery requirement of 20 days from the contract award. Delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance both occur at the destination. The supplier, Sharkcage Inc. of Spring Branch, TX, must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements (RP001), including palletization guidelines, with packaging conforming to ASTM D3951 only where not superseded by DLA mandates. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated military delivery point at Fort Drum, NY, with detailed marking and freight instructions provided. The item is intended for government use under solicitation SPE8ED-26-T-1185, with a required delivery date of July 24, 2026. Covered Defense Information may apply, and the contract references specific government use codes and traceability identifiers.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
DRUM, HAZARDOUS MATEThe contract specifies the procurement of 12 steel drums designed for hazardous materials, each with rigorous structural and performance requirements. Each drum must have a rated capacity of 322 liters with a minimum internal content of 335 liters, a minimum height of 965 mm without the cover, and an inside diameter of at least 660 mm. The drum shell must be constructed with a minimum material thickness of 1.0 mm and feature a full removable head with two bungs—one 50.8 mm and one 19.05 mm—secured by a bolt-and-nut locking ring with specified minimum dimensions and thicknesses to prevent loss during transit. All exterior surfaces, excluding the closing bolt and gasket, must be coated with a rust-inhibiting finish capable of withstanding 96 hours of salt spray testing per ASTM B-117, showing no rust creep, blistering, or peeling beyond 1/8 inch from a scratch, with film failure limited to trace amounts no larger than 1 mm. The interior must be coated with a corrosion-inhibiting enamel. Drums must conform to UN/POP 1A2/X440/S standards and be marked in compliance with 49 CFR 178 Subparts L and M. Acceptable exterior colors are restricted to specific Federal Standard 595 codes. Packaging and palletization must ensure physical and mechanical protection during shipment and storage in accordance with DLA Packaging Requirements for Procurement (RP001) and ASTM D3951, with all markings and labeling applying MIL-STD-129. The drums must be delivered FOB origin within 160 days of contract award, with no quantity variance allowed. Inspection and acceptance occur at the destination, with delivery directed to the DLA Distribution Facility in New Cumberland, Pennsylvania. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, superseding any conflicting specifications. Only approved manufacturers and part numbers are listed, and the solicitation number is SPE8ED-26-T-1190, with a response deadline of August 10, 2026, and a required ship date of January 18, 2027. Transportation logistics follow DLA procedural notes for first destination and freight shipping, with the NSN 8110-01-101-4056 and unit of issue as each
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
DIBBS
CLAMP, LOOPThis contract pertains to the procurement of CLAMP, LOOP with NSN 5340-01-132-5675 and part numbers from multiple suppliers including Boeing, UMPCO, TransDigm, and J&M Products, under solicitation SPE7LX-26-U-9057. A total quantity of 1,066 units is specified at a unit price that results in a total price to be determined upon award, with an estimated quantity subject to change and not guaranteed for purchase by the IDC. Delivery is required within 155 days, FOB origin, and the contract prohibits any variance in quantity—no tolerance for over or under shipment. Inspection and acceptance both occur at the destination, and the item is classified as a critical application item. Packaging and handling must strictly comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001 for packaging standards and MIL-STD-129 for marking and labeling. All packaging must adhere to ASTM D3951 if the material is non-hazardous per FED-STD-313, or to TQ requirement IP025 if hazardous. MIL-STD-130N governs identification marking, with emphasis on ensuring proprietary or insufficient data does not impede competitive procurement. Palletization must follow RP001 guidelines, and the Unit of Issue and Quantity per Unit Pack are fixed as per the contract. The solicitation is a Total Small Business Set-Aside under NAICS 332439, with full technical and quality requirements incorporated by reference from the DLA Master List, controlling revisions based on the solicitation issue date. The point of contact for inquiries is Theodore Misiolek at the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.
Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.
Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.
Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 333414
New
DIBBS
Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 333999
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 29 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 1 hour ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.
Other Warehousing and Storage

POSTED

about 1 hour ago

DEADLINE

in 29 days
View Details
NAICS: 333999
New
DIBBS
Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 29 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTUATING, LINEARThe contract is for the procurement of 154 units of the Cylinder Assembly, Actuating, Linear, identified by NSN 3040-01-642-5340, with a firm fixed price term and zero variance in quantity—no additions or reductions are permitted. The item is classified as a critical application item and must comply with DLA’s packaging requirements under RP001, including adherence to MIL-STD-2073-1E for prep, preservation, wrapping, cushioning, and unit container specifications, as well as MIL-STD-129 for marking with no special marking codes. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly authorized by the specification. Delivery is required within 276 days after the order date, with FOB origin, inspection and acceptance occurring at the destination. Two delivery points are specified: one at the DLA Distribution facility in New Cumberland, Pennsylvania, for 68 units, and another at the DLA Distribution facility in Tracy, California, for 86 units. All shipments must follow DLAD Proc Note C19 for transportation and C20 for first destination logistics. The contract, issued under solicitation SPE7L1-26-R-0111, references the DLA Master List of Technical and Quality Requirements for compliance, and the supplier must be JARP Industries, Inc. with part number 151234B. The required delivery date is February 6, 2027, and all technical and quality standards are controlled by the version of the DLA Master in effect on the solicitation issue date.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 29 days
View Details
NAICS: 333414
New
DIBBS
PARTS KIT, VEHICULAR COMPARTMENT HEATERThe contract is for a Parts Kit, vehicular compartment heater with NSN 2540-01-096-5023, quantity of 92 units, to be delivered within 307 days after contract award. It is issued under solicitation SPE7L1-26-R-0110, with a response deadline of August 28, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5. The acquisition is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency, with Logan McLaughlin as the primary point of contact. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific referenced controls including packaging, removal of government identification from non-accepted supplies, configuration change management, and export control of technical data under ITAR or EAR. Technical data subject to export restrictions may only be accessed by contractors with approved US/Canada Joint Certification Program certification, completion of required DLA training, and formal authorization. Contractual compliance is mandatory regarding configuration changes, deviations, and strict handling of controlled technical data, with DFARS 252.225-7048 applying to all disclosures to foreign persons, regardless of location.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 30 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA 29 CFR 1910.1200 for the labeling of all hazardous materials used in the product, ensuring that each container is properly marked with hazard warnings, product identifiers, and supplier information as mandated by the Hazard Communication Standard. It further demands the provision of up-to-date, compliant Safety Data Sheets for every hazardous component, including accurate details on chemical identity, physical and health hazards, handling precautions, emergency measures, and regulatory information. All documentation and labeling must align with current federal regulations and be readily accessible to workers and relevant authorities. This subcontract is issued under the NAICS code 541690 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The place of performance is specified as Chambersburg, Pennsylvania with a ZIP code of 17201-4150. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside classification indicated. The contract does not include a designated point of contact, and all submissions must be made through the provided DIBBS portal link to ensure proper receipt and processing.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details